Electrical Contacts
Mostrando 1-12 de 39 artigos, teses e dissertações.
-
1. Thermal, dielectric and catalytic behavior of palladium doped PVC films
Abstract The present paper discusses the aspects of synthesizing palladium (Pd) doped (Pd+2 and Pd0) poly(vinyl chloride) (PVC) using simple solution cast technique. The Pd loading to PVC was altered from 2.5% to 10.0% and the material properties were studied using UV-Visible spectroscopy (UV-Vis), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscop
Polímeros. Publicado em: 04/07/2019
-
2. A methodology for performance evaluation of LEDs based on ac small signal analysis
This paper shows fundamentals and results that support a promising methodology for evaluation in locus of a LED from its own radiating signal, and that allows monitoring of its aging by remote inference on which degradation mechanism is acting internally to the device's structure. It brings out also an alternative route for estimation of parameters of the Sh
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
3. Obtenção de fios em ligas de cobre para utilização em linhas de transmissão e em eletrodos para contatos elétricos / Obtation of cooper-chromium-zirconium alloy wires for use in electrical transmission lines and electrodes for electrical contacts
O objetivo do presente trabalho consistiu no desenvolvimento de fios de liga de cobre-cromo-zircônio (CuCrZr) em uma composição estabelecida em Cu-0,7%Cr- 0,1%Zr (em massa). Nas etapas desenvolvidas, foram feitos botões de cobrecromo (CuCr) e cobre-zircônio (CuZr) em um forno a arco elétrico de eletrodo não consumível, sendo esses botões, posteriorm
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/07/2011
-
4. Propriedades optoeletrônicas de interfaces híbridas metal/semicondutor orgânico preparadas por deposição assistida por feixe de íons (IBAD) / Optoelectronic properties of interfaces hybrid metal / organic semiconductor prepared by ion beam assisted deposition (IBAD)
In this work, optoelectronic properties from organic light emitting devices (OLEDs), based on conjugated polymers with metallic cathode, which were deposited by ion beam assisted deposition technique (IBAD) were studied. The main objective of this work is to produce a hybrid non abrupt metal/polymer interface and to study its effects on electron injection. T
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/07/2011
-
5. Construção e caracterização de célula solar tipo barreira Schottky CdTe/Al / Construction and caracterization of Schottky barrier solar cells CdTe/Al
In this work the techniques of hot wall epitaxy (HWE) and molecular beam epitaxy (MBE) on thin films of CdTe (cadmium telluride) were used in order to manufacture a prototype solar cell type Schottky barrier. The films were produced by evaporation of a solid alloy of CdTe, varying two parameters of deposition: the growth time and substrate temperature. In th
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 30/05/2011
-
6. Estudo de materiais, estruturas de dispositivos e fenômenos de transporte em sistemas fotovoltaicos híbridos orgânico-inorgânico / Study of materials, device structures and transport phenomena in hybrid photovoltaic systems
Recently a fast development in organic and hybrid photovoltaic field has been observed. Such devices are fabricated by organic semiconductors within components of a heterojunction, in which bulk heterojunctions obtained via interpenetrating networks at the sub-20-nm length scale. It permits the effective collection of photogenerated charge carriers even with
Publicado em: 2010
-
7. Investigação da Difusão de Portadores em Pontos Quânticos Sob Campo Elétrico Externo Por Meio da Varredura da Microluminescência
In this work, we present the study of energy transfer processes between self-assembled quantum dots (QDs) of InAs in GaAs layers within an intrinsic region of a p-i-n device. These p-i-n structures are assembled with electrical contacts providing the application of an electrical potential. The three samples used have diferent layer spacing and barrier size b
Publicado em: 2009
-
8. Nanotubos de titanatos aplicados como sensores de gás
In this work, the application of titanate nanotubes (TNTs) as gas sensors is investigated. TNTs were synthesized by refluxing a TiO2 (anatase) suspension in an aqueous NaOH (10 M) solution for 24hr, followed by washing with water until neutralization. Characterization by X-ray diffraction and scanning and transmission electron microscopies revealed that the
Publicado em: 2009
-
9. Estudo da brasabilidade de contatos elétricos por metal de adição 40%Ag-21%Zn-20%Cd-19%Cu. / Investigation of electrical contacts brazeability by filler metal 40%Ag-21%Zn-20%Cd-19%Cu.
Contatos elétricos são aplicados na área de geração, manuseio e distribuição de energia elétrica, sendo fabricados em metais condutores como: cobre eletrolítico e suas ligas. Através de alguns métodos de brasagem, pastilhas com propriedades de condutividade, elétrica e térmica, mais apuradas são brasadas sobre estas bases condutoras. Em funçã
Publicado em: 2008
-
10. Estudo da síntese e sinterização de pós compósitos do sistema Ta-Cu
Ta-Cu bulk composites combine high mechanical resistance of the Ta with high electrical and thermal conductivity of the Cu. These are important characteristics to electrical contacts, microwave absorber and heat skinks. However, the low wettability of Ta under Cu liquid and insolubility mutual these elements come hard sintering this composite. High-energy mi
Publicado em: 2008
-
11. Desenvolvimento de micropontas de silício com eletrodos integrados para dispositivos de emissão por efeito de campo. / Development of silicon microtips with integrated electrical contacts for field emission devices.
This work presents a fabrication method of silicon microtips with integrated electrical contacts into the structure. Our motivation is the future development of field emission devices - FED, however our focus in this research is the microstructure fabrication process. This method is based on: (i) anisotropic under-etch method that occurs in the silicon subst
Publicado em: 2007
-
12. Controlled depositioin and characteristics of electrical properties of carbon nanotubes / Deposição controlada e caracteristicas das propriedades eletricas em nanotubos de carbono
Not informed
Publicado em: 2007