Electric Arc Furnace
Mostrando 1-12 de 32 artigos, teses e dissertações.
-
1. Fundente para Recargue por Soldadura con Arco Sumergido a Partir de Ferrocromo-manganeso y Escoria de la Reducción Simultánea de Cromita y Pirolusita
Abstract The obtaining of a flux for hardfacing by Submerged Arc Welding (SAW), using ferrochrome-manganese and slag obtained from the simultaneous carbothermal reduction of chromite and pyrolusite is addressed. The ferrochrome-manganese and the slag were obtained, conceiving that both products satisfy the requirements of the components (alloy system and ma
Soldag. insp.. Publicado em: 24/10/2019
-
2. Use of electric arc furnace slag for producing concrete paving blocks
Resumo A escória de forno elétrico foi usada como substituto do agregado graúdo natural na produção de peças de pavimentação de concreto. O traço de concreto 1:2:3:0,51 (cimento:areia:agregado graúdo:água) foi definido para alcançar uma resistência à compressão de 35 MPa. Quatro grupos de concreto foram preparados: um traço referência e trê
Ambient. constr.. Publicado em: 2019-04
-
3. Evaluation of zinc removal and compressive strength of self-reducing pellets composed of Electric Arc Furnace Dust
Abstract The amount of Electric Arc Furnace Dust (EAFD) is continuously increasing in mini-mill steel plants. This dust is considered a hazardous waste because of the presence of elements like lead, cadmium and chromium. Among many different treatment processes for this issue, there is the possibility of returning the EAFD back to the Electric Arc Furnace. T
REM, Int. Eng. J.. Publicado em: 2019-03
-
4. Reduction of electric arc furnace dust pellets by mixture containing hydrogen
Abstract The large amount of dust generated in electric arc furnace aligned with its chemical composition makes this dust a potential source of iron in the direct reduction iron process. Thus, the aim of this research is to investigate the reduction of pellets produced with electric arc furnace dust using hydrogen as the reducing agent. The kinetic investiga
REM, Int. Eng. J.. Publicado em: 2019-03
-
5. Microstructural, thermochemistry and mechanical evaluation of self-reducing pellets using electric arc furnace (EAF) dust containing zinc for Waelz process
ABSTRACT The increment of recycling of steel using electric arc furnace and the tendency to coat of steel products with zinc, in order to prevent corrosion, has increased the proportion of galvanized scrap used worldwide in the recent years. Approximately 10 to 20 Kg/t of cast steel is generated in casting arcs. These collected dusts electric arc furnace (EA
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Carbothermic reduction of Electric Arc Furnace Dust via thermogravimetry
Abstract Electric Arc Furnace Dust (EAFD) is a solid waste originated from electric steelmaking furnaces. Currently, according to some authors, there is an estimated generation of 15 to 25 kg of dust per ton of steel produced. The formation of the dust is related to the following steps of the process: furnace charge, metal volatilization, iron vaporization u
REM, Int. Eng. J.. Publicado em: 2018-07
-
7. Characterization of mineral wools obtained from ornamental rock wastes
Abstract The study aimed to characterize the mineral wools obtained from wastes of the cutting step of marble and granite, in order to evaluate the possibility of their use on an industrial scale. Mixtures of marble and/or granite wastes were prepared in order to reach the chemical composition of rock and glass wools. The batches were melted in an electric a
REM, Int. Eng. J.. Publicado em: 2018-07
-
8. Evaluation of recycled MgO-C bricks and dead-burned dolomite fines in setting slag foaming in the electric arc furnace
Abstract Production cost reduction for the Electric Arc Furnace (EAF) technology is strongly dependent on the efficiency of the electrical energy being introduced into the metal bath. Besides EAF technology, the slag foaming process is currently applied to some other equipment for steel production aiming to save energy, productivity improvements, enhance the
REM, Int. Eng. J.. Publicado em: 2018-03
-
9. MgO Saturation Analisys of CaO-SiO2-FeO-MgO-Al2O3 Slag System
Electric arc furnace (EAF) slag has a range of functions, including improving energy efficiency through the "slag foaming" phenomenon. As such, the study of slag is important in EAFs. One of the factors that determine foaming quality and efficiency is the presence of solid particles. MgO saturation is highly significant since, in addition to ensuring the pre
Mat. Res.. Publicado em: 30/11/2017
-
10. Effect of Mill Type on Morphology of AA6013 Aluminium Powder
ABSTRACT In conventional recycling method, metal chips are cast after pressing and melting in electric arc furnace. Material loss occurs during the recycling from liquid metal due to the several reasons. Direct recycling method which produces the aluminium powder from aluminium chips using mechanical mill can be an alternative to conventional recycling metho
Matéria (Rio J.). Publicado em: 2016-09
-
11. Characterization and three-dimensional reconstruction of pores of self-reducing pellets done by EAF dust
This work focused on the characterization physical and microstructural of the self-reducing pellet made of Electric Arc Furnace (EAF) dust using different low cost techniques. The serial sectioning technique was used to evaluate detailed measurements of pore connections, tortuositiy of pores and porosity distribution. The chemical analysis using Inductively
Mat. Res.. Publicado em: 23/08/2013
-
12. Modificação e caracterização do resíduo pó de aciaria elétrica (PAE) para aplicação em reações de redução de cromo (VI)
In this study, electric arc furnace dust (EAFD) was thermally modified at different temperatures under H2 flow or charcoal in order to obtain reduced iron phases (Fe3O4, FeO and Fe0). The formation of these phases was confirmed by powder X-ray diffraction. The tests performed for reducing Cr (VI) using resultant materials obtained after thermal treatment of
Quím. Nova. Publicado em: 2013