Elastic Resistance
Mostrando 1-12 de 136 artigos, teses e dissertações.
-
1. Short-Term Effects of a Resistance Training Program Using Elastic Tubing in Patients with Heart Disease
Abstract Background Resistance training is effective in cardiac rehabilitation; however, it is conventionally performed using free weights or machines, which can pose logistic challenges to patients with restricted mobility. For its ease of access and cost-effectiveness, elastic tubing is a particularly appealing alternative, but it remains underutilized fo
Int. J. Cardiovasc. Sci.. Publicado em: 2021-04
-
2. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
3. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
4. BACTERIAL NANOCELLULOSE BIOMEMBRANE AS A SUPPORT FOR HUMAN INSULIN AIMING AT TRANSDERMAL PERMEATION
Production of bacterial nanocellulose was pursued as a matrix system for the stabilization of human insulin. The biomembranes produced by Gluconacetobacter hansenii were washed with 2% aqueous sodium dodecylsulfate solution, rinsed with ultrapure water and immersed in 1 mol L-1 NaOH aqueous solution at 60 °C for 90 min until neutralization. For the insulin
Quím. Nova. Publicado em: 2020-05
-
5. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. Influência do tipo e teor de pigmento no estado endurecido de ladrilhos hidráulicos
Resumo A aplicação de ladrilhos hidráulicos voltou a ser valorizada nos últimos anos em função de sua beleza e versatilidade. O ganho de resistência sem necessidade de queima é uma considerável vantagem, mas o tempo e o custo de produção e a manutenção em estoque são algumas desvantagexns observadas. Como são materiais que permanecem expostos
Cerâmica. Publicado em: 14/11/2019
-
7. The perceptions of physical therapists about facilitators and challenges in the use of different tools for resistance training in COPD patients: a mixed-method study
RESUMO O objetivo do estudo foi quantificar e analisar qualitativamente a percepção de fisioterapeutas sobre facilitadores e barreiras no uso de diferentes ferramentas para treinamento resistido em pacientes com doença pulmonar obstrutiva crônica (DPOC). O método utilizado foi desenvolvido em um centro de reabilitação. Seis fisioterapeutas que partici
Fisioter. Pesqui.. Publicado em: 16/09/2019
-
8. Análise eletromiográfica de músculos do complexo do ombro durante exercícios de rotação externa com faixa elástica
RESUMO Na artrocinemática do ombro, o manguito rotador atua estabilizando a cabeça umeral em contato com a cavidade glenoidal, enquanto realiza a translação inferior para contrabalancear a força rotacional promovida principalmente pelo deltoide. Exercícios de rotação externa (RE) vêm sendo utilizados na reabilitação de pacientes com disfunções n
Fisioter. Pesqui.. Publicado em: 16/09/2019
-
9. Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons
ABSTRACT The CLT is a building material that comes mainly used in Europe where it was developed. Lightweight, sturdy and eco-friendly, this material has become one of the most important constructive methods in the world. CLT are panels formed by layers of wood glued to each other orthogonally, always in odd numbers, symmetrical with respect to the central la
Matéria (Rio J.). Publicado em: 10/06/2019
-
10. Efeito da Taxa de Resfriamento na Liga Ni80Cu20 via Dinâmica Molecular
RESUMO A simulação em Dinâmica Molecular (MD) é uma poderosa ferramenta para estudo de ligas amorfas nanométricas. Neste artigo, a MD foi empregada para o estudo da liga Ni80Cu20. As simulações foram realizadas com o código livre LAMMPS, em um sistema contendo 2.000 átomos com interação atômica dada pelo potencial de Finnis-Sinclair (EAM-FS). O a
Matéria (Rio J.). Publicado em: 20/05/2019
-
11. The Influence of Microstructure and Mechanical Resistance on the Shape Memory of Ecae Processed Stainless Fe-Mn-Si-Cr-Ni-Co Steel
In the current work, XRD, SEM, EBSD and TEM techniques were used to evaluate the microstructure of stainless Fe-Mn-Si-Cr-Ni-Co shape memory steel processed by ECAE and annealed for one hour at temperatures ranging from 650ºC to 950ºC. The results were then correlated with the mechanical and shape-memory properties of the steel. It was observed that the sam
Mat. Res.. Publicado em: 09/08/2018
-
12. Effects of Rotor Speed on Peroxide/Bismaleimide Cured Polypropylene/Nitrile Rubber Thermoplastic Vulcanizates (TPVs)
Elastomer thermoplastics are a class of polymeric materials that received industry attention due to the possibility of joining the elastic of elastomers with the thermoplastics processability. The synergistic properties are linked to the appropriate processing. This study evaluated the effect of rotor speed during polymer mixing and the dynamic vulcanization
Mat. Res.. Publicado em: 09/08/2018