Elastic Parameters
Mostrando 13-24 de 175 artigos, teses e dissertações.
-
13. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
14. Impact of Alloy Composition and Thermal Stabilization on Martensitic Phase Transformation Structures in CuAlMn Shape Memory Alloys
Alloys of CuAlMn are known as cheap, high strength shape memory alloys with an excellent damping capacity within their austenitic-martensitic phase transformation, compared to alloy systems like NiTi, CuZnAl or MnCu. But CuAlMn alloys have disadvantage due to generation of voids by a high shrinkage which further increases the existing proneness to stress cra
Mat. Res.. Publicado em: 19/07/2018
-
15. Size Effects on Fracture Parameters of High Alumina Refractories
The randomness of phase compositions and their distribution as well as the micro cracks and pores in refractories result in the dependence of mechanical properties on the sample size. In this work, the size effects on fracture parameters including bending strength, elastic modulus and fracture toughness of high alumina bricks were investigated by testing sam
Mat. Res.. Publicado em: 10/07/2018
-
16. The dispersion curve applied in guided wave propagation in prismatic rods.
Abstract The early detection of failures in structures is a subject of great interest in engineering; several of these techniques are linked with the elastic wave propagation, using guided waves is one of these alternatives. Several structures of interest in engineering are laminar arrangements; the wave propagation in this type of structures depends not on
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
17. Strength analysis of composite cables
Abstract Carbon Fiber Reinforced Polymer (CFRP) cables, due to their outstanding performance in terms of specific stiffness and strength, are usually found in civil construction applications and, more recently, in the Oil & Gas sector. However, experimental data and theoretical solutions for these cables are very limited. On the contrary, several theoretica
Lat. Am. j. solids struct.. Publicado em: 04/06/2018
-
18. Analytical Strain-softening Solutions of a spherical cavity
ABSTRACT This paper deals with a spherical cavity excavated in infinite homogeneous and isotropic strain-softening rock mass subjected to a hydrostatic initial stresses. By simplifying the strain-softening process of the post-failure region as a Multi-step Brittle-Plastic model (MBPM), analytical solutions of the spherical cavity are derived with the consid
Lat. Am. j. solids struct.. Publicado em: 16/05/2018
-
19. Modeling the creep behavior of GRFP truss structures with Positional Finite Element Method
Abstract This paper presents the development of a formulation, based on Positional Finite Element Method, to describe the viscoelastic mechanical behavior of space trusses. The numerical method used was chosen due to its efficiency in the applications concerning nonlinear numerical analyses. The formulation describes the positional variation over time under
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
20. Validation of a simplified computer simulation method for plastic forming of metals by conventional tensile tests
Abstract This work was developed in order to validate a simplified computer simulation method for application in the drawing processes. The results of tensile tests on AISI 1004, AISI 1020 steel and copper were compared to those of computer simulations performed using the Deform-3D TM software. Each specimen was assumed to be an elasto-plastic material and w
REM, Int. Eng. J.. Publicado em: 2017-12
-
21. Free Vibration Analysis of Functionally Graded Nanocomposite Beams on Elastic Foundation Using a Mesh-Free Method
Abstract The use of Carbon Nanotubes as the reinforcing constituent for polymer matrix composites in place of conventional fibers has led to the emergence of a new generation of advanced composite materials. In this paper, the free vibration of functionally graded nanocomposite beams on elastic foundations are studied. Three different types of Carbon Nanotub
Lat. Am. j. solids struct.. Publicado em: 2017-12
-
22. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12
-
23. Epoxidized natural rubber and hydrotalcite compounds: rheological and thermal characterization
Abstract Epoxidized natural rubber (ENR) and synthetic non-modified hydrotalcite (HT) compounds were prepared and evaluated. Natural rubber (NR) was epoxidized with 20.6% of epoxy groups from a chemical modification of the latex. A sulfur-based curing system formulation with accelerators was used. The amounts of HT in the ENR-HT compositions was varied betwe
Polímeros. Publicado em: 21/09/2017
-
24. Elastoplastic Stability and Failure Analysis of FGM Plate with Temperature Dependent Material Properties under Thermomechanical Loading
Abstract The present paper explores the stability and failure response of elastoplastic Ni/Al2O3 functionally graded plate under thermomechanical load using non-linear finite element formulation based on first-order shear deformation theory and von-Karman’s nonlinear kinematics. The temperature dependent thermoelastic material properties of FGM plate are v
Lat. Am. j. solids struct.. Publicado em: 2017-08