Drilling Data
Mostrando 1-12 de 33 artigos, teses e dissertações.
-
1. Obtaining geotechnical parameters from correlations between geophysics and CPT tests in tailings dams
Abstract This article introduces a hassle-free methodology for geotechnical parameters to be obtained from correlations between geophysics and CPT field tests in tailings dams undergoing the decommissioning process, which are reasonably representative of site conditions, from the very early project stages, with extensive coverage of all impoundment parts, wi
REM, Int. Eng. J.. Publicado em: 2020-12
-
2. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
3. Avaliação de amidos modificados empregados na mineração para aplicação em fluidos de perfuração de poços de petróleo
RESUMO Amidos e seus derivados são utilizados em praticamente todos os setores industriais. Na indústria petrolífera podem ser empregados como aditivos controladores de filtrado, os quais controlam eficazmente a perda de fluido para a formação rochosa adjacente. O presente trabalho teve como objetivo avaliar o uso de amidos, de mandioca e de milho, util
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Favorability potential for IOCG type deposits in the Riacho do Pontal Belt: new insights for identifying prospects of IOCG-type deposits in NE Brazil
ABSTRACT: Archean iron oxide-copper-gold (IOCG) deposits have been systematically described in the world class Carajás IOCG district, Amazonian region of Brazil. More recently, several Neoproterozoic (ca 1.13 to 0.96 Ga) IOCG deposits have been identified in the Riacho do Pontal mobile belt situated in the Borborema Province on the northern border of the S�
Braz. J. Geol.. Publicado em: 06/12/2018
-
5. Improving short-term grade block models: alternative for correcting soft data
Abstract Short-term mining planning typically relies on samples obtained from channels or less-accurate sampling methods. The results may include larger sampling errors than those derived from diamond drill hole core samples. The aim of this paper is to evaluate the impact of the sampling error on grade estimation and propose a method of correcting the impre
REM, Int. Eng. J.. Publicado em: 2018-03
-
6. Methods of Hearing Preservation during Cochlear Implantation
Abstract Introduction Recent advances in surgical techniques and electrode design have made residual hearing preservation during cochlear implantation (CI) possible, achievable, and desirable. Objectives The objective of this study was to review the literature regarding methods used for hearing preservation during CI surgery. Data Synthesis We performe
Int. Arch. Otorhinolaryngol.. Publicado em: 2017-09
-
7. Application challenges for information and automation technologies in an underground mine in Brazil
Abstract Organizations can establish a value-added sustainable strategy by increasing asset utilization. WLAN infrastructure in underground mines tends to be a consistent platform for reliability in data/information management, and assertive governance practices. It enables remote monitoring, registering and data transfer from a control room, avoiding unnece
REM, Int. Eng. J.. Publicado em: 2017-03
-
8. SMART MONITORING AND DECISION MAKING FOR REGULATING ANNULUS BOTTOM HOLE PRESSURE WHILE DRILLING OIL WELLS
Abstract Real time measurements and development of sensor technology are research issues associated with robustness and safety during oil well drilling operations, making feasible the diagnosis of problems and the development of a regulatory strategy. The major objective of this paper is to use an experimental plant and also field data, collected from a basi
Braz. J. Chem. Eng.. Publicado em: 2016-12
-
9. MODELING AND ANALYSIS OF UNSTEADY FLOW BEHAVIOR IN DEEPWATER CONTROLLED MUD-CAP DRILLING
Abstract A new mathematical model was developed in this study to simulate the unsteady flow in controlled mud-cap drilling systems. The model can predict the time-dependent flow inside the drill string and annulus after a circulation break. This model consists of the continuity and momentum equations solved using the explicit Euler method. The model consider
Braz. J. Chem. Eng.. Publicado em: 2016-03
-
10. The Prediction of the Man-Hour in Aircraft Assembly Based on Support Vector Machine Particle Swarm Optimization
ABSTRACT: As the representative of manufacturing industry, aircraft assembly lacks of effective method to forecast man-hour. The forecasting accuracy of existing methods is universally pretty low. On the basis of full analysis of aircraft assembly's feature, this study proposes a forecasting model based on support vector machine (SVM), which is optimized by
J. Aerosp. Technol. Manag.. Publicado em: 2015-03
-
11. Temperature change in pig rib bone during implant site preparation by low-speed drilling
OBJECTIVES: The purpose of this study was to evaluate the temperature change during low-speed drilling using infrared thermography. MATERIAL AND METHODS: Pig ribs were used to provide cortical bone of a similar quality to human mandible. Heat production by three implant drill systems (two conventional drilling systems and one low-speed drilling system) was e
Journal of Applied Oral Science. Publicado em: 2010-10
-
12. Fossils in quaternary micrites of Bodoquena Range, Bonito-MS and their application in paleoenvironmental studies / Fósseis em micritos quaternários da Serra da Bodoquena, Bonito-MS e sua aplicação em estudos paleoambientais
Bonito town and surrounding areas in Mato Grosso do Sul state are tourist attractions related with many quaternary carbonate deposits which form waterfalls, dams and render almost zero turbidity waters. That area is part of the National Park of Bodoquena Range and Pantanal Biosphere Reserve (UNESCO). Calcareous tufa are porous rocks formed by calcium carbona
Publicado em: 2009