Doped Materials
Mostrando 13-24 de 127 artigos, teses e dissertações.
-
13. Structural, Morphological and Magnetic Properties of FeCo-(Fe,Co)3O4 Nanocomposite Synthesized by Proteic Sol-Gel Method Using a Rotary Oven
FeCo nanoparticles coated with (Fe,Co)3O4 (magnetite doped with cobalt) were synthesized by the proteic sol-gel chemical route. The synthesized materials were characterized by Thermogravimetry (TG), X-Ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), vibrating-sample magnetometer (VSM) and Mössbauer spectrosc
Mat. Res.. Publicado em: 18/03/2019
-
14. Highly birefringent do-octagonal photonic crystal fibers with ultra flattened zero dispersion for supercontinuum generation
Abstract Photonic crystal fiber (PCF) structures with do-octagonal geometry have been studied. These do-octagonal PCF structure have smaller circular holes arranged in rhombic fashion at its centre. Moreover, these small holes are doped with materials like butanol, ethanol, methanol and propanol. Do-octagonal PCF structures doped with methanol and air filled
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2019-03
-
15. Doped Silicon Nanowires for Lithium Ion Battery Anodes
Nanostructured silicon (Si) has showed outstanding results as Li-ion battery anode material. Fabrication of nanostructured silicon anode materials is usually very complex, time consuming and expensive. In this work, silicon nanowires (SiNW`s) were produced by using rapid and uncostly metal catalyzed electroless etching (MCEE) method from various silicon wafe
Mat. Res.. Publicado em: 17/01/2019
-
16. Development of a microwave absorbing material based on molybdenum-doped niobium pentoxide
Abstract This work aimed to perform the characterization of electrical properties of niobium pentoxide, Nb2O5, pure and doped with molybdenum, prepared by powder metallurgy route and to do a comparative analysis of the influence of this material when sintered in a muffle or in a microwave oven. The results showed that the doping of the niobium pentoxide with
Cerâmica. Publicado em: 2019-01
-
17. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
18. Mechanical properties and morphological characteristics of ARALL reinforced with TRGO doped epoxy resin
ABSTRACT Mechanical properties in tension, bending, fatigue and lap-shear in two different proportions (0.5%wt and 1%wt) of TRGO (Thermally Reduced Graphite Oxide) doped ARALL (Aramid Aluminium Laminate) were examined. The materials and their failure modes were characterized morphologically by examination through SEM (Scanning Electron Microscopy). Some mech
Matéria (Rio J.). Publicado em: 06/12/2018
-
19. Conductive Composites Based on Polyurethane and Nanostructured Conductive Filler of Montmorillonite/Polypyrrole for Electromagnetic Shielding Applications
In this study, composites based on polyurethane (PU) derived from castor oil and montmorillonite/polypyrrole doped with dodecylbenzenesulfonic acid (MMt-PPy.DBSA) were developed. In order to investigate the potential use of these materials for electromagnetic shielding applications, the electrical and mechanical properties of PU/MMt-PPy.DBSA composites were
Mat. Res.. Publicado em: 30/07/2018
-
20. Fatigue strength of several dental ceramics indicated for CAD-CAM monolithic restorations
Abstract This in vitro study evaluated the fatigue strength of different ceramic materials indicated for monolithic restorations. Disc-shaped specimens were made according to ISO 6872 from five different ceramic materials: feldspathic ceramic (FC), polymer-infiltrated ceramic network (PIC), lithium disilicate glass-ceramic (LD), zirconia-reinforced lithium s
Braz. oral res.. Publicado em: 11/06/2018
-
21. FOTOELETROCATÁLISE EM SEMICONDUTORES: DOS PRINCÍPIOS BÁSICOS ATÉ SUA CONFORMAÇÃO À NANOESCALA
The science of semiconductors, essential in electronics, is pivotal also for the most active research fields of environmental science and engineering today - the development of solar energy conversions and advanced oxidation processes, exemplified by the harvesting of sun daylight to produce electric energy, environmentally friendly fuels and to clean up wat
Quím. Nova. Publicado em: 2018-03
-
22. Synthesis and Characterization of Niobium Carbide with Copper Addition Obtained Via Gas Solid Reaction
The use of niobium containing materials' has gained much attention of the scientific community in the late years due its various applications in diverse fields. NbC is a highly versatile material. Copper addition may alter several of its properties, such as morphology, crystal structure etc. as well as enhance its catalytic behavior. Nanostructured NbC with
Mat. Res.. Publicado em: 26/02/2018
-
23. Titanium Coating with Hydroxyapatite and Chitosan Doped with Silver Nitrate
Biomaterials are effective alternatives for tissue substitution, including the bone tissue, since they do not pose risks of transmission of diseases or immune rejection. Nowadays, there is an interest in new materials capable of being associated with other substances which favor bone formation, especially natural biopolymers, in particular chitosan, which ma
Mat. Res.. Publicado em: 01/02/2018
-
24. Ab initio LSDA+U Study of Optical Properties of RVO4 (R = Eu, Ho, Lu) Compounds
A first principles investigation at the pressure 7 GPa of the optical properties of RVO4 (R= Eu, Ho, Lu) orthovanadates in the framework of the density functional theory (DFT) using the linearized-augmented plane-wave method is reported in order to predict new optical materials for continuous-wave lasers. The electronic structure of all orthovanadates is stu
Mat. Res.. Publicado em: 22/01/2018