Dip Coating
Mostrando 13-24 de 101 artigos, teses e dissertações.
-
13. Obtainment and Characterization of a Silicon alkoxides-based Coating Applied to a Substrate of Stainless Steel 316L for Use in Biomaterials
The silicon alkoxides-based coating is an alternative to control the release of cytotoxic ions through metal implants. This study evaluated the influence of the number of layers of a hybrid coating on the surface of austenitic stainless steel AISI 316L on the corrosion resistance. This coating was produced from the precursors of silicon alkoxides 3-(trimetho
Mat. Res.. Publicado em: 11/03/2019
-
14. Obtención y caracterización de recubrimientos de biovidrio sobre la aleación de Mg AZ31
ABSTRACT The ideal material for a metal bone prosthesis must undergo a gradual corrosion in vivo, without releasing toxic components, while acting as a support and facilitating the growth of bone tissue, until a replacement is completed by the regenerated bone. . Biodegradable magnesium alloys have been studied because of their excellent mechanical propertie
Matéria (Rio J.). Publicado em: 19/07/2018
-
15. Characterization of Niobia-alumina Deposited by the Sol-gel Process on Carbon Steel
The precursor sols of Al2O3 and mixed NbxOy/Al2O3 oxides were synthesized by the sol-gel process using acetylacetone to control the reaction kinetics of the organometallic oxides in the mixture. The layers of the precursor sols of Al2O3 and NbxOy/Al2O3 were deposited on AISI steel 1020 by manual immersion (dip coating). The lyophilized sols were characterize
Mat. Res.. Publicado em: 16/04/2018
-
16. Structural, optical and electrical properties of Ni-doped Co3O4 prepared via Sol-Gel technique
In this article, Nickel doped Cobalt oxide thin films and powders have been prepared on glass substrates using sol gel based dip coating process in order to investigate their optical, structural and electrical properties. The Ni concentration was changed from 0 to 9 wt(%).The synthesized samples were characterised by Ultraviolete visible analysis, X-ray diff
Mat. Res.. Publicado em: 07/02/2018
-
17. Produção e caracterização de filmes finos transparentes e condutores de óxido de grafeno reduzido
RESUMO Dispersões de óxido de grafeno (GO) e de óxido de grafeno reduzido (rGO) foram produzidas, respectivamente, por via química através do método de Hummers modificado e por redução do GO com adição de polímero PSS (poli (4-estirenosulfonato de sódio)) e ácido ascórbico. Amostras de GO e rGO/PSS foram caracterizadas pelas seguintes técnicas
Matéria (Rio J.). Publicado em: 08/01/2018
-
18. ITO Obtained by Spray Pyrolysis and Coating on Glass Substrate
Conductive thin films have various applications in different technological fields. Indium tin oxide (ITO) is a mixed oxide. In the film form, ITO has been widely employed as electrode in many optoelectronic devices. Methods like thermal evaporation, sputtering, chemical vapor deposition (CVD), electron beam, spray coating, and sol-gel synthesis give ITO thin
J. Braz. Chem. Soc.. Publicado em: 2017-12
-
19. Emission Properties Related to Distinct Phases of Sol-Gel Dip-Coating Titanium Dioxide, and Carrier Photo-Excitation in Different Energy Ranges
Titanium dioxide (TiO2) in the form of pellets (pressed powder) and thin films are investigated, revealing the presence of distinct phases: mainly anatase and rutile. Characterization of optical, structural and electrical properties were carried out on samples submitted to different sort of thermal annealing (TA), at distinct temperatures, 500 and 1000ºC, d
Mat. Res.. Publicado em: 20/03/2017
-
20. N and F Codoped TiO2 Thin Films on Stainless Steel for Photoelectrocatalytic Removal of Cyanide Ions in Aqueous Solutions
N-F codoped TiO2 films were immobilized on stainless steel sheets through a combined approach involving a dip-coating technique and a hydrothermal treatment, followed by calcination at 400°C in the presence of air. Photocatalyst characterization was conducted using XRD, Raman and UV-VIS spectroscopy as well as SEM. The films were tested in a three-electrode
Mat. Res.. Publicado em: 23/02/2017
-
21. Preparation and Anti-Corrosive Properties of Cerium Oxide Conversion Coatings on Steel X52
In this study, cerium-based conversion coating was deposited on steel X52 by dip immersion method. Cerium oxide/hydroxide is an environmentally friendly conversion coating. The effects of immersion times and immersion temperatures on corrosion properties of cerium conversion coating on steel X52 were studied. Its corrosion resistance in 3.5 wt.% NaCl solutio
Mat. Res.. Publicado em: 09/02/2017
-
22. Composite Films from Polystyrene with Hydroxyl end Groups and Carbon Nanotubes
Composites from polystyrene with hydroxyl end groups and multiwall carbon nanotubes were fabricated to evaluate their properties. The Carbon Nanotubes (CNTs) were synthetized by chemical vapor deposition technique using ferrocene and benzene as precursors. Polystyrene with hydroxyl end groups was prepared by solution polymerization employing styrene as monom
Mat. Res.. Publicado em: 09/02/2017
-
23. Morphological, Structural and Optical Properties of ZnO Thin Films Deposited by Dip Coating Method
Zinc oxide (ZnO) thin films were deposited on glass substrat by dip coating technique. The effects of sol aging time on the deposition of ZnO films was studied by using the field emission scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and optical transmission techniques. The morphology of the films strongly dep
Mat. Res.. Publicado em: 28/11/2016
-
24. Dip coating of a carbon steel sheet with Ni reinforced TiO2 nanoparticles
In this work carbon steel plates were dip-coated with a composite film obtained from a colloidal suspension of Ni-TiO2. Suspensions with different solids contents were used to evaluate the adherence of the film and the microstructural features. The samples were characterized using both optical and scanning electron microscopy, energy dispersive spectroscopy
Mat. Res.. Publicado em: 12/04/2016