Deformation Modulus
Mostrando 1-12 de 79 artigos, teses e dissertações.
-
1. Estimating the rock mass deformation modulus: A comparative study of empirical methods based on 48 rock mass scenarios
Abstract The rock mass deformation modulus, Erm, is an input parameter for most numerical modeling to verify the deformation behavior of rocks due to rock engineering activities within/on it. Among the most common methodologies used for estimating this parameter, empirical correlations based on rock mass classification schemes (e.g., RQD, RMR, GSI, and Q) st
REM, Int. Eng. J.. Publicado em: 2021-01
-
2. STUDY OF THERMAL EXPANSION AND COMPRESSION STRENGTH OF THREE WOOD SPECIES FROM PLANTATIONS
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
CERNE. Publicado em: 2020-06
-
3. Inflammatory segmental vitiligo during oral isotretinoin use: a casual association?,
ABSTRACT The objective of this study was to evaluate the effect generated by a thermal treatment on the dimensional changes and compression behavior of three wood species from commercial plantations (Eucalyptus nitens, Tectona grandis and Gmelina arborea). To accomplish the goal, dilatometric and compression tests were performed in the three directions of wo
An. Bras. Dermatol.. Publicado em: 2020-06
-
4. The role of bondline thickness on mechanical properties of bio-based polyurethane
ABSTRACT Bio-based adhesives have been largely applied on several applications in many industrial areas, including automotive and laminated food packaging. Polyurethanes (PU) occupy a leading position among the most used bio-based polymers due to their large range of properties and application versatility. Recent works reported that PU obtained from castor o
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. Uma abordagem experimental e numérica para determinação de curvas de compressão para concreto simples e reforçados com fibras de aço
RESUMO A curva tensão-deformação do concreto é importante para o dimensionamento de estruturas, pois por meio dela é possível obter sua resistência à compressão, sua deformação de pico, o módulo de elasticidade e a tenacidade do concreto. Entretanto, essa é uma propriedade que não é comumente determinada nos ensaios de controle de qualidade do
Matéria (Rio J.). Publicado em: 16/09/2019
-
6. System to measure torsion modulus of polymers using the deformation energy method
Abstract This paper presents an alternative method to measure the torsion modulus, G, for samples of polymers. We constructed a measurement system with a force sensor (FS) and a rotational movement sensor (RMS) to obtain a relationship between force (F) and torsion angle (θ). An expression that could return the value of G was deduced using the deformation e
Polímeros. Publicado em: 01/08/2019
-
7. Investigating Hyperbolic Shear Deformation Theory on vibroacoustic behavior of the infinite Functionally Graded thick plate
Abstract This paper applies acoustic analysis of Sound Transmission Loss (STL) through infinite Functionally Graded (FG) thick plate employing Hyperbolic Shear Deformation Theory (HSDT). The procedure for applying a FG plate is followed by considering the material properties are changed continually based on power-law distribution of the materials in terms of
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
8. Amorphization of Graphite Flakes in Gray Cast Iron Under Tribological Load
A gray cast iron disc, which had been submitted to a heavy duty automotive brake test, was examined with energy filtered transmission electron microscopy. A graphite flake in a convenient angular position showed the shear interaction of graphite layers with the iron matrix in nano-scale resolution. Atomic layers of graphite were wedged into the ferritic bulk
Mat. Res.. Publicado em: 28/05/2018
-
9. Effect of Thermal Treatment on the Dynamic Behaviors at a Fixed Loading Rate of Limestone in Quasi-vacuum and Air-filled Environments
Abstract Thermal damage in rock engineering occurs in the air-filled and quasi-vacuum environments of rock mass located near or far from the free surface. Meanwhile, dynamic loads are encountered frequently in engineering practice. In this study, 39 limestone samples are prepared, and a series of laboratory tests, including split Hopkinson pressure bar (SHP
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
10. ANALYSIS OF ELASTICITY IN WOODS SUBMITTED TO THE STATIC BENDING TEST USING THE PARTICLE IMAGE VELOCIMETRY (PIV) TECHNIQUE
ABSTRACT The most important parameter in terms of material mechanical behavior knowledge is the modulus of elasticity, being traditionally obtained through destructive tests. The objective of this study is the verification of the potential use of the particle image velocimetry technique (PIV) as a tool to obtain the modulus of elasticity in sawed wood sample
Eng. Agríc.. Publicado em: 2018-04
-
11. Elastic modulus of PVDF with bentonite or LiNbO3 using deformation energy
Abstract Polyvinylidene fluoride (PVDF) is valued for its properties of transparency to light, lightness, flexibility, mechanical strength, chemical stability, ease of processing, and low-cost production. Ceramics have low mechanical strength and poor processability, but have excellent piezo- and pyroelectric characteristics. The deficiencies of ceramics can
Polímeros. Publicado em: 21/09/2017
-
12. Determination of the Mechanical Properties of Epoxy Silica Nanocomposites through FEA-Supported Evaluation of Ball Indentation Test Results
In the present paper a continuous Finite Element Analysis (FEA) simulation method of the ball indentation hardness test is introduced in order to describe the deformation behavior of nanosilica composites and with this to extract precisely the material's stress-strain behavior. The developed procedure demonstrate in particular the adequacy of this method to
Mat. Res.. Publicado em: 31/08/2017