Estimating the rock mass deformation modulus: A comparative study of empirical methods based on 48 rock mass scenarios

AUTOR(ES)
FONTE

REM, Int. Eng. J.

DATA DE PUBLICAÇÃO

2021-01

RESUMO

Abstract The rock mass deformation modulus, Erm, is an input parameter for most numerical modeling to verify the deformation behavior of rocks due to rock engineering activities within/on it. Among the most common methodologies used for estimating this parameter, empirical correlations based on rock mass classification schemes (e.g., RQD, RMR, GSI, and Q) stand out the most, principally because of their low cost when compared to the other methods. Herein, the main correlations used in practice are evaluated and comparted for 48 different rock quality scenarios, previously characterized and classified according to rock mass classification systems. The results obtained by each of the empirical correlations demonstrated that normalized correlations, that is, based on the ratio of the rock mass and intact rock modulus, Erm/Ei, underestimate the Erm values when compared to those results obtained from not-normalized correlations in the scenarios of better quality rock masses. For poor quality rock mass scenarios, both non-normalized and normalized correlation presented similar results. The correlations proposed by Hoek and Diederichs (2006) and Galera et al. (2007) estimated more central Erm values when compared to the other correlations, for all quality scenarios, while the Mitri et al. (1994) and Sonmez et al. (2006) methods estimated most high and low values of Erm, respectively.

Documentos Relacionados