Dc Dc Converters
Mostrando 13-24 de 29 artigos, teses e dissertações.
-
13. DESIGN OF A COMMERCIAL APPROACH OF ELECTRONIC BALLASTS TO SUPPLY HIGH-PRESSURE SODIUM LAMPS IN PUBLIC LIGHTING / SISTEMATIZAÇÃO DO PROJETO DE REATORES ELETRÔNICOS PARA ALIMENTAÇÃO DE LÂMPADAS DE VAPOR DE SÓDIO EM ALTA PRESSÃO PARA ILUMINAÇÃO PÚBLICA
This thesis presents an electronic ballast prototype to supply high-pressure sodium lamps used in public lighting. The goal is to develop a commercial approach able to replace the still commonly used electromagnetic ballasts, performing improvements in the public lighting system. Along this thesis, the state of art in lighting area is presented, especially i
Publicado em: 2009
-
14. Uma nova família de conversores com comutação ZCS na abertura e fechamento das chaves
Este trabalho apresenta uma nova célula de comutação não dissipativa com aplicação estendida a qualquer topologia tradicional de conversores CC-CC através da substituição da célula PWM dessas estruturas. A célula proposta consiste de uma chave principal e duas auxiliares, sendo que todas as chaves operam em ZCS na entrada em condução e ZCS na sa
Publicado em: 2008
-
15. MÃtodos de sincronizaÃÃo de conversores em sistemas de geraÃÃo distribuÃda / Converter synchronization methods for distributed generators systems
The use of frequency converters DC/AC to integrate renewable energy as distributed generation is becoming more common. In such applications, the synchronization with the voltage vector is fundamental to control the converters, particularly considering the new requirements on Low Voltage Ride Through demanded from the distributed generation. This work propose
Publicado em: 2008
-
16. ADVANCED USE OF THE EXCEEDING POWER PLANT CAPACITY OF HVDC TRANSMISSION SYSTEMS TO PRODUCE OXYGEN AND HYDROGEN / UTILIZAÇÃO AVANÇADA DA CAPACIDADE EXCEDENTE DE SISTEMAS DE TRANSMISSÃO CCAT PARA PRODUÇÃO DE OXIGÊNIO E HIDROGÊNIO
This PhD thesis discusses the use of the power plant capacity in HVDC transmission systems during inactive periods of the main converters to feed local loads, aiming at a better AC power quality and DC transmission. The power available in the inactive periods is drained by an auxiliary converter connected in parallel with the HVDC converter. This energy can
Publicado em: 2008
-
17. DESIGN AND IMPLEMENTATION OF INTERIOR LIGHTING SYSTEMS USING LIGHT EMITTING DIODES (LEDS) / PROJETO E IMPLEMENTAÇÃO DE LÂMPADAS PARA ILUMINAÇÃO DE INTERIORES EMPREGANDO DIODOS EMISSORES DE LUZ (LEDS)
Este trabalho apresenta um sistema de iluminação eficiente empregando diodos emissores de luz (LEDs) de alta intensidade. O objetivo é desenvolver um circuito eletrônico, compacto e de baixo custo, para acionamento e controle da corrente dos LEDs contidos em um único invólucro. A proposta visa a racionalização no uso da energia elétrica através de
Publicado em: 2008
-
18. INTERACTION BETWEEN LOW-RIPPLE SWITCHED CONVERTERS AND FUEL CEL LS / INTERAÇÃO ENTRE CONVERSORES CHAVEADOS COM BAIXA ONDULAÇÃO E CÉLULAS DE COMBUSTÍVEL
This dissertation discusses the interaction between fuel cells and the DC-DC converter just connected across its terminals. For that, it presents a modified algorithm to represent the dynamic behavior of fuel cell stacks as much the current ripple effects from power converters on such cells. PEM type fuel cells (Proton Exchange Membrane) are studied to get a
Publicado em: 2007
-
19. DESENVOLVIMENTO DE CONVERSORES ESTÁTICOS PARA SISTEMAS FOTOVOLTAICOS AUTÔNOMOS / DEVELOPMENT OF STATIC CONVERTERS TO STAND ALONE PHOTOVOLTAIC SYSTEMS
This work presents a new energy conditioning system for application in stand-alone photovoltaic systems with battery bank. Firstly, the characteristics of solar photovoltaic energy, the modeling of a photovoltaic cell and the equivalent electrical circuit are presented. In a second moment, the photovoltaic generation systems and a review of the static conver
Publicado em: 2007
-
20. CONTRIBUIÇÃO AO ESTUDO DA MÁQUINA ASSÍNCRONA TRIFÁSICA DUPLAMENTE ALIMENTADA APLICADA A AEROGERADORES DE VELOCIDADE VARIÁVEL
This work presents the analysis and implementation of a vector control applied to Doubly-Fed Induction Generators (DFIG) used in grid connected wind turbines. DFIGs are nowadays the more widely used concept for grid connected wind turbine, especially for rated power above 1 MW. The main reason is the low rotor PWM power converter rating. The present work dea
Publicado em: 2006
-
21. ANÁLISE COMPARATIVA DE INVERSORES MULTINÍVEIS COM CÉLULAS H-BRIDGE CONECTADAS EM SÉRIE / COMPARISON ANALYSIS OF CASCADED MULTILEVEL INVERTERS
This Master Thesis presents a methodology to compare different topologies and configurations of multilevel systems applied to drive medium voltage induction motors. Initially, it presents the input and output parameters that must be supplied by the power drivesystems manufacturer. Then, the mathematical models of the performance indexes used are presented, b
Publicado em: 2006
-
22. Modelling, simulation and experimental validation of a peak power tracking system for solar array generator of artificial satellites / Modelagem, simulação e validação experimental de um sistema de rastreio de potência máxima para geradores solares de satélites artificiais
A necessidade de controle ótimo e alta eficiência são importantes requisitos no projeto de sistemas espaciais. O objetivo deste trabalho é aplicar a técnica de linearização conhecida por "State Space Averaging" e alguns princípios de ontrole ótimo para modelar um sistema de rastreio de potência máxima no qual um gerador solar fornece energia para
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/08/2005
-
23. An imroved design for ZVT DC-DC PWM converters with snubber assisted auxiliary switch
Este artigo propõe uma metodologia de projeto aprimorada para determinação dos componentes auxiliares para o conversor ZVT CC-CC PWM snubber assisted auxiliary switch. O procedimento de projeto proposto é baseado na redução das perdas de condução no circuito auxiliar. Isto é somente possível devido à localização do capacitor snubber de bloqueio,
Sba: Controle & Automação Sociedade Brasileira de Automatica. Publicado em: 2005-03
-
24. Modelagem, simulação e validação experimental de um sistema de rastreio de potência máxima para geradores solares de satélites artificiais / Modelling, simulation and experimental validation of a peak power tracking system for solar array generator of artificial satellites
A necessidade de controle ótimo e alta eficiência são importantes requisitos no projeto de sistemas espaciais. O objetivo deste trabalho é aplicar a técnica de linearização conhecida por "State Space Averaging" e alguns princípios de ontrole ótimo para modelar um sistema de rastreio de potência máxima no qual um gerador solar fornece energia para
Publicado em: 2005