Cylindrical Tube
Mostrando 1-12 de 39 artigos, teses e dissertações.
-
1. Drawing Electrochemical Sensors Using a 3D Printing Pen
This communication demonstrates that a 3D printing pen, commercially-available as a toy for kids, can be used to draw thermoplastic electrochemical sensors using conductive filaments over any desirable format and substrate. A polylactic acid filament containing graphene or carbon black was passed through the 3D pen that works as a handheld 3D printer (fused
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
2. Releasing systems for aerospace industry based upon Shape Memory Alloys: characterization of materials for actuators
ABSTRACT Releasing and deployment maneuvers carried out during space satellites launching are usually performed by utilizing pyrotechnics loads. However, it is considered convenient to replace this technique by others not requiring explosives (Non Explosive Actuators-NEA). This is mainly due to the necessity of reducing high-shock and vibrations induced leve
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Mini-channel Two Phase Flow of Hydrogen Peroxide: Decomposition with Silver Catalyst
ABSTRACT Hydrogen peroxide is a chemical compound which is commonly used as a disinfectant at lower concentrations. The chemical is called as a green propellant for space applications. Water and oxygen are the products after self-decomposition of the compound at higher concentrations. The reaction rate at lower concentrations can be enhanced by using catalys
J. Aerosp. Technol. Manag.. Publicado em: 14/06/2018
-
4. Finite Element Analysis and Crashworthiness Optimization of Foam-filled Double Circular under Oblique Loading
Abstract Finite element analysis and optimization design carry out for the quasi static responses of foam-filled double circular tube is presented in this paper. In the investigation of the crashworthiness capability, some aspects were considered for variations in geometry parameters of tubes and the loading condition to investigate the crashworthiness capab
Lat. Am. j. solids struct.. Publicado em: 2016-11
-
5. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
6. Multi objective optimization of foam-filled circular tubes for quasi-static and dynamic responses
AbstractFuel consumption and safety are currently key aspects in automobile design. The foam-filled thin-walled aluminium tube represents a potentially effective material for use in the automotive industry, due to its energy absorption capability and light weight. Multi-objective crashworthiness design optimization for foam-filled double cylindrical tubes is
Lat. Am. j. solids struct.. Publicado em: 2015-06
-
7. Parametric Model Method and Deployment Simulation of Inflatable Antenna Structures
ABSTRACT: In this paper, we develop a parametric model method and simulate the deployment mechanism of inflatable antenna structures. Different folded methods are developed for the primary members of inflatable antenna structures, which include inflatable tubes, an inflatable torus, a reflector etc. The unstressed configuration and the folded configuration o
J. Aerosp. Technol. Manag.. Publicado em: 2015-06
-
8. Dynamic responses and damages of water-filled cylindrical shell subjected to explosion impact laterally
An account is given of some principal observations made from a series of experiments in which metal cylindrical shells were subjected to lateral explosion impact by different TNT charge mass and stand-off distance. These cylindrical shells were filled with water in order to identify the main effects produced by the fluid-structure interaction. In comparison,
Lat. Am. j. solids struct.. Publicado em: 2014
-
9. Analysis and PIC simulation of a Gyrotron travelling wave tube amplifier
The analysis of a Ka-band gyrotron Travelling Wave Tube (gyro-TWT) amplifier using a uniform cylindrical waveguide as its interaction circuit has been presented for the TE01 mode of operation a self-consistent nonlinear analysis in the large signal regime. The analysis predicts that the saturated peak output power of ~ 134 kW with a power conversion efficien
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2013-12
-
10. The effect of the introduction of an exit tube on the separation efficiency in a cyclone
The paper shows the analysis of the effect of introduction of an exit tube into the cylindrical part of a cyclone on the flow velocity, pressure losses and, above all, the separation efficiency. We made measurements and carried out CFD simulations for three levels of the exit tube introduction. The ratios of the depth of the exit tube introduction to the cyc
Braz. J. Chem. Eng.. Publicado em: 2013-09
-
11. Histology and ultrastructure of the fat body of Anticarsia gemmatalis (HÜBNER, 1818) (LEPIDOPTERA: NOCTUIDAE)
The aim of this study was to analyze the morphologically the fatty body of fourth-instar Anticarsia gemmatalis larvae under light, transmission and scanning electron microscopy. Two distinct portions of the fat body were detected: the parietal (PA) and perivisceral (PV). The PA, the parietal portion, presented a long-stripped shape located below the tegument
Braz. arch. biol. technol.. Publicado em: 2013-04
-
12. Prediction of the temperature distribution of partially submersed umbilical cables
The objective of this work is to predict the temperature distribution of partially submersed umbilical cables under different operating and environmental conditions. The commercial code Fluent® was used to simulate the heat transfer and the air fluid flow of part of a vertical umbilical cable near the air-water interface. A free-convective three-dimensional
Journal of the Brazilian Society of Mechanical Sciences and Engineering. Publicado em: 2012-06