Curves And Surfaces
Mostrando 1-12 de 86 artigos, teses e dissertações.
-
1. Electrochemical Determination of Trifluralin Herbicide Using Silver Solid Amalgam Electrode: Application in Fresh Food Samples
This paper reports the use of polished silver solid amalgam electrode (p-AgSAE) allied to square wave voltammetry (SWV) in the development of a simple, sensitive, fast and green electroanalytical methodology for the trifluralin herbicide determination in fresh food samples. The experimental (supporting electrolyte and potential and time accumulation) and vol
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
2. Effect of Pressure Gradient on the Development of Görtler Vortices
ABSTRACT: Boundary layers over concave surfaces may become unstable due to centrifugal instability that manifests itself as stationary streamwise counter rotating vortices. The centrifugal instability mechanism in boundary layers has been extensively studied and there is a large number of publications addressing different aspects of this problem. The results
J. Aerosp. Technol. Manag.. Publicado em: 24/10/2019
-
3. Assessment of the Fatigue Behavior of Ti-6Al-4V ELI Alloy with Surface Treated by Nd:YAG Laser Irradiation
The effect of a surface treatment by Nd:YAG laser irradiation on the fatigue behavior of Ti-6Al-4V ELI was studied. Axial fatigue tests were performed to obtain S-N curves in polished and laser treated conditions. Roughness measurements and scanning electron microscopy were used to characterize the features of the modified surface. A reduction in the fatigue
Mat. Res.. Publicado em: 05/09/2019
-
4. A smooth path to plot hydrogen atom via Monte Carlo method
Abstract In this paper, we show how to build a basic computer program using the Monte Carlo method to display the hydrogen atomic orbitals. For this, in a heuristic way, we applied a von Neumann acceptance-rejection method in simple problems of potential wells, and we end with the hydrogen orbitals representation. In this technique, we spread points uniforml
Rev. Bras. Ensino Fís.. Publicado em: 22/07/2019
-
5. Dental implant surfaces treated with phosphoric acid can modulate cytokine production by blood MN cells
Abstract: The study characterizes dental implant surfaces treated with phosphoric acid to assess the effects of acid treatment on blood cells and correlate them with cytokine levels. The implant surfaces examined were divided into untreated metal surface (US; n = 50), metal surface treated with phosphoric acid (ATS; n = 50) and cement surface (CS; n = 50) gr
Braz. oral res.. Publicado em: 16/05/2019
-
6. Statistics of the Pareto front in Multi-objective Optimization under Uncertainties
Abstract In this paper we address an innovative approach to determine the mean and a confidence interval for a set of objects analogous to curves and surfaces. The approach is based on the determination of the most representative member of the family by minimizing a Hausdorff distance. This method is applied to the analysis of uncertain Pareto frontiers in m
Lat. Am. j. solids struct.. Publicado em: 14/11/2018
-
7. Electrochemical Behavior of stainless steel AISI 430 exposed to simulated food
ABSTRACT Due to the excellent properties of stainless steel, these materials have a variety of applications among which is the food processing industry. One of the main problems in this industry is the possible releasing of metal ions towards food. For this reason, it is very important to know corrosion behavior of steels that are used in this industry. In t
Matéria (Rio J.). Publicado em: 05/03/2018
-
8. EXPERIMENTAL AND THEORETICAL ANALYSIS OF NA OXAZINOQUINOXALINE DERIVATIVE FOR CORROSION INHIBITION OF AISI 1018 STEEL
The inhibitory ability of an oxazinoquinoxaline derivative (OAQX) against the corrosion of AISI 1018 mild steel induced by aqueous 0.6 mol L-1 NaCl solution is herein evaluated. Linear polarization resistance studies showed the inhibitory efficiency of OAQX varying from 62.75% to 75.93% with OAQX concentration ranged from 0.259 x 10-4 mol L-1 to 3.243 x 10-4
Quím. Nova. Publicado em: 2018-03
-
9. Influence of the Tungsten Content on Surface Properties of Electroless Ni-W-P Coatings
Ternary Ni-W-P films were produced by electroless deposition using baths with different tungsten concentrations. After deposition, the coated surfaces were annealed at 400°C for 1h. Surface morphology and film composition in the as-plated condition were assessed by SEM and EDS analyses, respectively. The crystalline phases after annealing were investigated
Mat. Res.. Publicado em: 21/11/2017
-
10. Fractographic and rheological characterizations of CF/PP-PE-copolymer composites tested in tensile
Abstract This work shows the fractographic study of fractured surfaces resulted from tensile tests of thermoplastic composites based on poly(propylene-co-ethylene) (PP-PE) and modified PP-PE copolymers reinforced with continuous carbon fibers (CF). The PP-PE matrix was modified with two agents called AM1 (based on maleic anhydride) and AM2 (containing an ela
Polímeros. Publicado em: 29/06/2017
-
11. Nonlinear Vibration and Mode Shapes of FG Cylindrical Shells
Abstract The nonlinear vibration and normal mode shapes of FG cylindrical shells are investigated using an efficient analytical method. The equations of motion of the shell are based on the Donnell’s non-linear shallow-shell, and the material is assumed to be gradually changed across the thickness according to the simple power law. The solution is provided
Lat. Am. j. solids struct.. Publicado em: 2017-03
-
12. Biofuncionalización de Ti6Al4V mediante crecimiento de nanoestructuras de TiO 2 con contenido de calcio y fósforo
ABSTRACT In this work the effect of the electrodeposition of calcium phosphate on TiO2 nanostructures was evaluated. For that, TiO2 nanostructures were developed in a solution of NH4F and NH4H2PO4 on Ti6Al4V substrates and subsequent cathodic electrodeposition was performed using Ca(NO3)2 and (NH4)2HPO4 as electrolyte. The surface morphology was observed by
Matéria (Rio J.). Publicado em: 2016-09