Curing Temperature
Mostrando 1-12 de 99 artigos, teses e dissertações.
-
1. Physical-mechanical behavior of alkali-activated materials produced by the one-part method based on fly ash and rice husk ash
Abstract The study on the physical-mechanical properties of alkali-activated materials (AAM) produced by the ‘one-part’ method was carried out. For this, residues such as fly ash and rice husk ash (RHA) were used. The alkaline activator (NaOH) was calcined together with RHA for 2 h at 750 °C. Dry mixes were prepared by replacing fly ash with 10%, 20%, a
Cerâmica. Publicado em: 2022
-
2. Use of glass waste in the production of metakaolin-based geopolymer submitted to room temperature and thermal curing
Resumo O metacaulim é a principal matéria-prima utilizada na síntese de geopolímeros, embora a relação entre os teores de sílica e alumina não seja a ideal. Normalmente, o teor de SiO 2 é ajustado com o uso de silicatos presentes na solução ativadora. Uma opção ecoeficiente seria o uso de resíduos de vidro como fonte adicional de sílica. Este
Ambiente Construído. Publicado em: 2022
-
3. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
4. Probiotic characterization of a commercial starter culture used in the fermentation of sausages
Abstract Probiotic starter culture does not only improve the safety and shelf-life of products but also extends health benefits to the consumer. This study investigated the probiotic potential of a commercial starter culture used in the fermentation of meat sausages. The starter culture tested, composed of Lactobacillus sakei, Staphylococcus xylosus, and Sta
Food Sci. Technol. Publicado em: 2021-06
-
5. Prediction of Mechanical and Functional Features of Aged Rubber Composites Based on BR/SBR; Structure-Properties Correlation
In this study, the structure-properties relationship between the thermal factors of BR/SBR blends [normalize factor h BR 100 hBR 100 − hBR x, and the maximum peak temperature difference of thermal decomposition of BR and SBR Δ T max = T max BR − T max SBR ] with their aging time (1 to 40 days) was demonstrated using DTG profile of uncu
Mat. Res.. Publicado em: 20/01/2020
-
6. Argamassas de cal e metacaulim: influência das condições de cura
RESUMO Nesse estudo analisou-se a influência das condições de cura de argamassas de cal aérea com dois tipos de metacaulim, utilizados como substituto parcial da massa de cal (10%). Para a análise, foram realizados ensaios de resistência mecânica à flexão e à compressão e, de composição mineralógica por difração de Raio-X (DRX), em corpos de
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. Avaliação da utilização da pós cura nas propriedades térmicas e mecânicas de um sistema epóxi de cura à temperatura ambiente
RESUMO Neste trabalho, uma resina epóxi de cura a temperatura ambiente foi submetida a ciclos térmicos de pós cura para verificar as alterações nas propriedades térmicas e mecânicas finais do material. As amostras foram obtidas por vazamento em molde metálico e os ciclos de pós cura foram realizados a 75°C, 90°C, 110°C por uma hora e um ciclo de
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. Effect of Curing Temperature, Activator Solution Composition and Particle Size in Brazilian Fly-Ash Based Geopolymer Production
The geopolymer binder is a relatively new class of inorganic binding material of elevated mechanical strength and good chemical properties. This can be produced using clay minerals or byproducts of the industrial processes, such as metakaolin, fly-ash and blast furnace slag. In this work, geopolymers were produced by alkaline activation of a Brazilian fly-as
Mat. Res.. Publicado em: 22/08/2019
-
9. APPLICATION OF POLYCARBOXYLIC ACIDS AS BINDERS FOR TiO2 IMMOBILIZATION ON COTTON TEXTILES
ABSTRACT Immobilizing the photocatalyst on a support is an alternative solution to a critical issue in photocatalysis, which is the need for unit operations to remove the photocatalyst from the effluent. In this work, TiO2 was immobilized onto a cotton textile substrate by polycarboxylic acid binders (succinic and citric acids) using a solution deposition me
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
10. Impacto nas propriedades mecânicas do concreto curado sob baixas temperaturas
RESUMO O processo de cura das matrizes cimentícias é muito importante na determinação das suas propriedades no estado endurecido. Nessas circunstâncias, o concreto pode sofrer sérias avarias quando exposto às severas variações térmicas. As baixas temperaturas de cura em que as matrizes cimentícias são expostas podem influenciar nas propriedades n
Matéria (Rio J.). Publicado em: 10/06/2019
-
11. Influência do uso de cinza volante na elevação adiabática de temperatura e resistência à compressão de concretos
RESUMO A construção de grandes edifícios tem requerido a execução de blocos de fundação de grandes dimensões, com volumes que chegam a milhares de m3 de concreto. Em geral, estas estruturas são executadas em concretos autoadensáveis e/ou de altas resistências, resultando em elevados consumos de aglomerante. Nesses casos, o emprego de cinza volante
Matéria (Rio J.). Publicado em: 10/06/2019
-
12. Comparison of in vivo and in vitro models to evaluate pulp temperature rise during exposure to a Polywave® LED light curing unit
Abstract Objectives: To measure and compare in vivo and in vitro pulp temperature (PT) increase (ΔTEMP) over baseline, physiologic temperature using the same intact upper premolars exposed to the same Polywave® LED curing light. Methodology: After local Ethics Committee approval (#255,945), local anesthesia, rubber dam isolation, small occlusal preparati
J. Appl. Oral Sci.. Publicado em: 20/05/2019