Copolymer Ethylene Vinyl Acetate Eva
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. Synergistic Effect of EG and Cloisite 15A on the Thermomechanical Properties and Thermal Conductivity of EVA/PCL Blend
The purpose of this study was to investigate the synergy of expanded graphite (EG) and Cloisite 15A (C15A) on the thermal conductivity and thermomechanical properties of ethylene-vinyl acetate copolymer/poly ( ɛ-caprolactone) (EVA/PCL) blend. Scanning electron microscopy (SEM) results showed that the blend had a phase separation, in which the PCL phase (app
Mat. Res.. Publicado em: 01/12/2016
-
2. Efeito da adição de TIO2 nas propriedades térmicas e na cristalinidade do copolímero de etileno/acetato de vinila
We investigated the effect of adding titanium dioxide nanoparticles (TiO2) to ethylene vinyl acetate (EVA) copolymer, containing 28% vinyl acetate groups, on the crystallinity and miscibility of the copolymer. Films of EVA/TiO2 containing 0.25%-1% TiO2, relative to the total weight of EVA, were prepared from their solution. The obtained films were characteri
Quím. Nova. Publicado em: 2014-04
-
3. Estudo do comportamento de materiais não convencionais utilizados como revestimento de paredes, visando à redução da carga térmica.
A presente dissertação estudou o compartamento térmico, físico e mecânico das argamassas de revestimentos compostas por gesso puro, gesso/EVA (ethylene-vinyl acetate copolymer) e gesso/vermiculita aplicadas nas superficies das paredes de edificação visando à redução da carga térmica relativamente às paredes convencionais constituídas de tijolos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 10/02/2012
-
4. Caracterização de resíduos de copolímeros de etileno-acetato de vinila - EVA / Characterization of ethylene-vinyl acetate copolymer (EVA) residues
O poli[(etileno)-co-(acetato de vinila)] (EVA) possui grande aplicação na indústria calçadista, sendo utilizado na confecção de placas expandidas para posterior corte de palmilhas e entressolas. Estudos realizados na região sul do Brasil mostraram que os resíduos gerados pela indústria calçadista foram superiores a 200 toneladas/mês em 2001, sendo
Publicado em: 2010
-
5. Síntese e caracterização estrutural, morfológica e óptica de partículas de PbCrO4 e Pb2CrO5 e sua dispersão em SiO2 / Synthesis and structural, morphological and optical characterization of PbCrO4 and Pb2CrO5 particles and its dispersion in SiO2
In this work, the synthesis of particles from the PbO-CrO3 system, in particular the PbCrO4 and Pb2CrO5 compositions were accomplished, by a polymeric precursor method, evaluating its application as pigments. In order to eliminate the negative toxic aspect of these materials, the dispersion of the same in SiO2 was achieved, by the sol-gel method. The samples
Publicado em: 2009
-
6. Desenvolvimento e caracterização de filmes tubulares de nanocompósitos de PEAD/EVA/argila organofílica / Development and characterization of blown films of HDPE/EVA/organophilic clay nanocomposites
In this work, the use of ethylene-vinyl acetate copolymer (EVA) in substitution to compatibility agents normally employed in the production of high density polyethylene (HDPE) nanocomposites (such as polyethylene grafted with maleic anhydride - PEMA) was evaluated due to its intrinsic polarity and relative low cost. Two EVAs with different melt flow indexes
Publicado em: 2008
-
7. Morfologia e propriedades térmicas de compósitos de HDPE/EVA com POSS
Neste trabalho foram estudados compósitos que apresentam como matriz polimérica uma blenda composta por polietileno de alta densidade (HDPE) e copolímero etileno acetato de vinila (EVA) e como nanocarga, silsesquioxano poliédrico oligomérico (POSS). Os compósitos foram processados em câmara de mistura fechada e caracterizados quanto às propriedades t
Publicado em: 2008
-
8. Modificação do Poli(hidroxibutirato) PHB com nucleantes e com o copolímero (etileno-co-acetato de vinila) - EVA
In this work, we sought to modify PHB, processing it in the melted state, and to evaluate the effect of the modifications on its mechanical properties and biodegradation characteristics. The following systems were therefore studied: a PHB/EVA blend, in a 90/10 ratio, with an ethylene-co-vinyl acetate copolymer containing 28% of VA; a PHB and PHB/EVA blend wi
Publicado em: 2008
-
9. Análise da viabilidade técnica da utilização do copolímero etileno acetato de vinila (EVA) descartado pela indústria calçadista em misturas asfálticas (processo seco) / Analysis of the technical feasibility of the use of the ethylene vinyl acetate copolymer (EVA) discarded for the footwear industry in asphalt mixtures (dry process)
A presente dissertação teve por objetivo analisar o comportamento de misturas asfálticas modificadas, pelo processo seco, com o copolímero etileno acetato de vinila (EVA), resíduo sólido descartado pela indústria calçadista. Em razão das características do EVA, acredita-se que ele possa melhorar as características mecânicas de misturas asfáltica
Publicado em: 2007
-
10. Mechanical behavior of Ethylene Vinyl Acetate copolymer (EVA) used for fabrication of mouthguards and interocclusal splints
Um modelo experimental de arco dentário, obtido em epóxi, acoplado a uma máquina universal de ensaios Kratos, foi utilizado para estudar o comportamento mecânico do copolímero de etileno e acetato de vinila (EVA), na forma de protetor bucal para esporte e placa plana. As seguintes variáveis foram observadas: espessura (lâminas de 3 e 4 mm), temperatur
Brazilian Dental Journal. Publicado em: 2007
-
11. Study of the mechanical behaviour of mouth protectors prepared with ethylene and vinyl acetate copolymer: experimental model of dental arches produced with epoxy / "Estudo do comportamento mecânico de protetores bucais confeccionados em copolímero de etileno e acetato de vinila: modelo experimental de arcos dentais obtidos em epóxi"
An experimental model of dental arch, moulded in epoxy, was used to study the mechanic behaviour of a copolymer of ethylene and vinyl acetate (EVA), in the form of a flat plaque or mouth protector in function of three variables: thickness, temperature and the absence or presence of artificial saliva. The evaluation of the mechanical behaviour of EVA, as a pl
Publicado em: 2006
-
12. Analysis of the mechanical properties and characterization by solid state 13C NMR of recycled EVA copolymer/silica composites
The incorporation of micrometer sized silica particles on poly (ethylene-co-vinyl acetate) - EVA - residues from the footwear industry was evaluated. The effects of the processing parameters - temperature and mixing ratio - on the mechanical behavior of molded plates of neat recycled EVA and EVA/silica composites were also investigated. The mechanical proper
Materials Research. Publicado em: 2005-09