Converters
Mostrando 25-36 de 133 artigos, teses e dissertações.
-
25. An efficient routing scheme to reduce packet loss in all optical networks
Optical burst switching (OBS) is a promising technology for the next generation optical Internet. A buffer-less OBS network can be implemented using ordinary optical communication equipment without the need for either wavelength converters or optical memories. However, OBS networks suffer from a relatively high blocking probability, a primary metric of inter
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2010-12
-
26. Analysis of wear in organic and sintered friction materials used in small wind energy converters
Wind energy converters of small size used in isolated units to generate electrical energy must present low maintenance cost to such facilities economically viable. The aspect to be analyzed in cost reduction is the brake system, since in isolated systems the use of brake is more frequent reducing the brake pads life time. This study aims at analyzing the wea
Publicado em: 2010
-
27. Guias de onda poliméricos para sensoriamento óptico e conversão de comprimento de onda / Polymeric based waveguides for optical biosensor and wavelength conversion
Um Luminescent Solar Concentrators (LSC) é basicamente uma base plástica transparente ou vidro contendo centros luminescentes.Enquanto o recente avanço dos conversores de comprimento de onda tenha aberto novas possibilidades para o desenvolvimento de células solares mais eficientes, estes também abriram novas frentes de pesquisa.Uma destas frentes envol
Publicado em: 2010
-
28. Estudo e implementação de um controle de corrente para conversores em matriz e inversores fonte de tensão sem capacitor no elo de corrente contínua / Study and implementation of a current control for matrix converter and voltage source inverters without capacitor in DC link
A presente tese refere-se a um modelo de controle de corrente para conversores em matriz trifásico para trifásico e inversores fonte de tensão trifásica sem capacitor no elo de corrente continua com o objetivo minimizar e compensar as distorções presentes nas tensões de saída dos conversores de modo a obter correntes elétricas senoidais na carga. Ne
Publicado em: 2010
-
29. Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico
This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technologi
Publicado em: 2010
-
30. Projeto de um conversor analógico-digital para um receptor Bluetooth em tecnologia CMOS. / Analog to digital converter design for a Bluetooth receiver in CMOS technology.
In this work, an Analog to Digital Converter (ADC) fulfilling the Bluetooth standard specifications is designed. This block stays at the reception side of an integrated wireless transceiver in CMOS technology. Initially, an analysis of the ADC as a system is carried out, at the same time that the specifications at that level are developed. The architecture a
Publicado em: 2010
-
31. AnÃlise experimental da degradaÃÃo imposta por sistemas Ãpticos a aplicaÃÃes IP / Experimental analysis of the degradation imposed by optical systems on IP
The objective of this work is to experimentally evaluate how physical impairments on the network can affect the performance of IP applications. Especially This work encompasses the analysis of the cross-layer effect caused by all-optical wavelength converters in the video signal. For this purpose, it was evaluated the packet error rate degradationcaused by p
Publicado em: 2010
-
32. Reguladores integrados charge-pump multiplicadores de tensão para aplicações de alta corrente / Integrated charge pump voltage multiplier regulator for high current applications
Neste trabalho de Mestrado, foi projetado um conversor DC/DC charge-pump (CP) duplicador de tensão para corrente de carga máxima de 20mA, e que necessita de circuitos de controle para o apropriado acionamento das chaves, regulação de tensão e proteção do estágio duplicador de tensão. O sistema de controle projetado é composto por um circuito de reg
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 17/12/2009
-
33. Análise, projeto e implementação de conversores CC-CC com ampla faixa de conversão aplicados em iluminação de estado sólido
This work consists of the study, design and implementation of DC-DC converters, used in lighting systems based on light emitting diodes (LEDs). Can be powered by an universal AC voltage source or battery, and the current in the LEDs is controlled digitally. The main objective is to present a proposal of new step-up/down converters topologies with full conver
Publicado em: 2009
-
34. USE OF ELECTRONIC CONVERTERS TO SUPPLY OF HIGH BRIGHTNESS LEDS WITH APPLICATION IN HUMAN TISSUE AND THEIR INTERACTION THERAPY / UTILIZAÇÃO DE CONVERSORES ELETRÔNICOS QUE ALIMENTAM LEDS DE ALTO BRILHO NA APLICAÇÃO EM TECIDO HUMANO E SUA INTERAÇÃO TERAPÊUTICA
This paper presents a study on the application of high-brightness LED (Light Emitting Diode)to health care. The LEDs are supplied by electronic converters, proposed in order to analyze the light emitted by the LEDs and their interaction with human tissues. Throughout the work, a comparative study between the LED and LASER and their actions on human tissue is
Publicado em: 2009
-
35. DESIGN OF CONTROLLERS FOR DC-DC CONVERTERS FOR APPROACH OF THE DISMANTLING OF / PROJETO DE CONTROLADORES PARA CONVERSORES CC-CC PELA ABORDAGEM DO DESACOPLAMENTO DE ESTADOS
In this work, we propose to analyze the controller design of a classical dc-dc converter in a different manner. Instead of the traditional mathematics transfer function analysis, we will describe the block diagram of the plant to be controlled using Space-State Averaging, decoupling the states effects one acts each other and designing the controllers individ
Publicado em: 2009
-
36. ANÁLISE, MODELAGEM E VALIDAÇÃO EXPERIMENTAL DE UMA METODOLOGIA PARA O PROJETO DO INDUTOR EM CONVERSORES BOOST PFC / ANALYSIS, MODELING AND EXPERIMENTAL VALIDATION OF A DESIGN METHODOLOGY FOR THE INDUCTOR IN PFC BOOST CONVERTERS
This work presents the development of a methodology for design of inductor in singlephase PFC boost converters operating in CCM mode in agreement with international standards IEC 61000-3-2 and CISPR 22. Such converters are used in front-end modules of information technology equipment. This methodology is based on the investigation of the relationship among m
Publicado em: 2009