Continuum Damage Mechanics
Mostrando 1-8 de 8 artigos, teses e dissertações.
-
1. On the Decreasing Flexural Modulus of Glass/Vinylester Composite Beams Up to Failure State
Abstract The comparison of the failure state for composite laminates under bending and tensile loads is a well-known issue which has been intensively discussed in the literature. The scope of the current work is to investigate the appropriate method of the flexural modulus of the composite laminates by the aid of experimental and numerical approach. The prim
Lat. Am. j. solids struct.. Publicado em: 2017-08
-
2. Load Bearing Capacity of a Dented Aluminum Pipe Subjected to Internal Pressure Considering the Effect of Ductile Damage
AbstractIn this paper, the effect of ductile damage on the behavior of a dented Aluminum pipe subjected to internal pressure is investigated. The plastic behavior of pipes under indentation is studied using continuum damage mechanics theory and the elastic-plastic finite element analysis. Finite element calculations are carried out using the damage plasticit
Lat. Am. j. solids struct.. Publicado em: 2015-04
-
3. Hot tensile and creep rupture data extrapolation on 2.25Cr-1Mo steel using the CDM Penny-Kachanov methodology
Hot tensile and creep data were obtained for 2.25Cr-1Mo steel, ASTM A387 Gr.22CL2, at the temperatures of 500-550-600-650-700 °C. Using the concept of equivalence between hot tensile data and creep data, the results were analyzed according to the methodology based on Kachanov Continuum Damage Mechanics proposed by Penny, which suggests the possibility of us
Mat. Res.. Publicado em: 31/01/2014
-
4. Efeitos acoplados da temperatura e evolução de dano em meios contínuos elasto-plásticos / Damage evolution and thermal coupled effects in elastoplastic solids
O surgimento de novos materiais, aliado ao aumento da demanda industrial por ferramentas numéricas capazes de prever o aparecimento de defeitos em processos de conformação mecânica, tem estimulado o desenvolvimento de novos modelos materiais. A Mecânica do Dano Contínuo, em cujo contexto este trabalho está inserido, provou ser uma abordagem capaz de p
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/07/2011
-
5. Aplicação da Teoria de Dano na análise do comportamento de materiais compósitos / Aplicação da teoria de dano na análise do comportamento de materiais compósitos
A Mecânica do Dano Contínuo (MDC) teve importante desenvolvimento desde os trabalhos iniciais de Kachanov e Rabotnov sendo uma ferramenta prática para considerar processos de danificação em materiais e estruturas em nível de contínuo macroscópico. Neste trabalho, apresenta-se uma aplicação da teoria do dano anisotrópico baseada em teorias desenvol
Publicado em: 2009
-
6. Análise estrutural de laminados compósitos sujeitos a cargas de impacto.
Este trabalho tem como objetivos; i) instrumentar uma torre de impacto do tipo DTT (Drop Test Tower), ii) desenvolver rotinas e programas para medição dos dados adquiridos nos ensaios experimentais, iii) investigar e analisar experimentalmente e numericamente o comportamento estrutural de laminados compósitos sujeitos a cargas impulsivas de impacto. Ensai
Publicado em: 2009
-
7. ImplementaÃÃo de modelo de dano isotrÃpico aplicado a problemas acoplados hidro-geomecÃnicos
The macroscopic behaviour of a material can be described by constitutive models able to capture the structure observed along the application of several mechanical loading steps. The constitutive behaviour of a bedrock medium shows that for some stress levels hydromechanical models, based in poro-elasticity theories, represent in a satisfactory way the stress
Publicado em: 2007
-
8. THE STRUCTURAL BEHAVIOUR OF COMPOSITE LAMINATES MANUFACTURED USING RESIN INFUSION UNDER FLEXIBLE TOOLING
This thesis presents a detailed investigation on the structural behaviour of hybrid plain weave composite laminates manufactured using Resin Infusion under Flexible Tooling (RIFT) process under static and dynamic impact loading conditions. Composite laminates were manufactured using a newly developed RIFT manufacturing facility marking the beginning of a new
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 200511