Hot tensile and creep rupture data extrapolation on 2.25Cr-1Mo steel using the CDM Penny-Kachanov methodology

AUTOR(ES)

Reis Sobrinho, José Francisco dos, Bueno, Levi de Oliveira

FONTE

Mat. Res.

DATA DE PUBLICAÇÃO

31/01/2014

RESUMO

Hot tensile and creep data were obtained for 2.25Cr-1Mo steel, ASTM A387 Gr.22CL2, at the temperatures of 500-550-600-650-700 °C. Using the concept of equivalence between hot tensile data and creep data, the results were analyzed according to the methodology based on Kachanov Continuum Damage Mechanics proposed by Penny, which suggests the possibility of using short time creep data obtained in laboratory for extrapolation to long operating times corresponding to tens of thousands hours. The hot tensile data (converted to creep) define in a better way the region where β=0 and the creep data define the region where β=1, according to the methodology. Extrapolation to 10,000 h and 100,000 h is performed and the results compared with results obtained by other extrapolation procedures such as the Larson-Miller and Manson-Haferd methodologies. Extrapolation from ASTM and NIMS Datasheets for 10,000 h and 100,000 h as well as data from other authors on 2.25Cr-1Mo steel are used for assessing the reliability of the results.

Documentos Relacionados

• Constant load creep data in air and vacuum on 2.25Cr-1Mo steel from 600 °C to 700 °C
• Correlation between creep and hot tensile behaviour for 2.25Cr-1Mo steel from 500ºC to 700ºC Part 1: an Assessment According to usual Relations Involving stress, temperature, strain rate and Rupture Time
• Microstructure Evolution and Creep Properties of 2.25Cr-1Mo Ferrite-Pearlite and Ferrite-bainite Steels After Exposure to Elevated Temperatures
• High-temperature oxidation of pure Fe and the ferritic steel 2.25Cr1Mo
• Tenacidade a fratura na ZAC de aços 2,25Cr-1Mo