Concentrated Loads
Mostrando 1-12 de 22 artigos, teses e dissertações.
-
1. Optimized design of RC deep beams based on performance metrics applied to strut and tie model and in-plane stress conditions
Abstract Deep beams do not behave according to classical beam theory. The nonlinearity of strain distribution within these elements requires application of strut and tie models (STM) or other alternatives to evaluate the complex stress field. Although the design of these elements is a common task for structural engineers, limited research is found on assessi
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
2. Analysis of the contribution of the block-soil contact in piled foundations
Abstract Geotechnical engineering has often been challenged by demands from technically and economically bold construction projects, such as that of tall buildings. The architectural requirements of these buildings have increased and concentrated the loads from structural systems without proportionally increasing plant area. New forms of using load capacity
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
3. Shear strength analysis of slabs without transverse reinforcement under concentrated loads according to ABNT NBR 6118:2014
Resumo A solicitação por cargas parcialmente distribuídas em lajes sem armadura transversal, frequente em tabuleiros de pontes, resulta na propagação horizontal da força cortante em direção aos apoios, situação na qual nem toda a largura da laje é mobilizada. Por esta razão, os modelos de resistência à força cortante de vigas e de resistência
Rev. IBRACON Estrut. Mater.. Publicado em: 18/07/2019
-
4. Development of Improved Models for Estimation of Bursting Stresses in Elements under High-Concentrated Load
Abstract In precast concrete segmental tunnels, radial and circumferential joints are often the most highly stressed parts and it is therefore important to use appropriate equations to accurately analysed these joints during design and provide adequate structural capacity to avoid failure. Different design codes have put forward equations for the estimation
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
5. Influence of heat treatment on the sensory and physical characteristics and carbohydrate fractions of french-fried potatoes (Solanum tuberosum L.)
AbstractThe aim of this study was to analyze the impact that heat treatment with salts and freezing processes on the sensory, instrumental, and physico-chemical characteristics of fried potatoes of the Monalisa cultivar. The potatoes were blanched in distilled water (P); sodium chloride solution (B1); calcium chloride solution (B2), and a solution with both
Food Sci. Technol. Publicado em: 15/09/2015
-
6. Análise do comportamento eletroaeroelástico de uma seção típica para geração piezelétrica de energia / Electroaeroelastic behavior analysis of a typical section for piezoelectric energy harvesting
Converting aeroelastic vibrations into electricity for low power generation has received growing attention over the past few years. In addition to potential applications for aerospace structures, the goal is to develop alternative and scalable configurations for wind energy harvesting to use in wireless electronic systems. The use of a typical airfoil sectio
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/02/2012
-
7. A refined shear deformation theory for flexure of thick beams
A Hyperbolic Shear Deformation Theory (HPSDT) taking into account transverse shear deformation effects, is used for the static flexure analysis of thick isotropic beams. The displacement field of the theory contains two variables. The hyperbolic sine function is used in the displacement field in terms of thickness coordinate to represent shear deformation. T
Latin American Journal of Solids and Structures. Publicado em: 2011-06
-
8. Flexural motions under accelerating loads of structurally prestressed beams with general boundary conditions
The transverse vibration of a prismatic Rayleigh beam resting on elastic foundation and continuously acted upon by concentrated masses moving with arbitrarily prescribed velocity is studied. A procedure involving generalized finite integral transform, the use of the expression of the Dirac delta function in series form, a modification of the Struble's asympt
Latin American Journal of Solids and Structures. Publicado em: 2010-09
-
9. Integração de sistemas rotor-mancais hidrodinâmicos-estrutura de suporte para resolução numérica / Integration of rotor-hydrodynamic bearings-support structure systems for numerical resolution
The Rotordynamics occupies a prominent position in the design of machines and structures, due to the wide application of rotating machinery and the importance of the knowledgment of its operation for purposes of optimization and design for cost reduction, quality improvement and increased component life cycle. These machines and their components have peculia
Publicado em: 2010
-
10. Numerical and analytical study for the determination in natural fire situation of the critical load on steel beams under concentrated load / Estudo numérico e analítico para determinação em situação de incêncio natural da carga crítica de vigas de aço com carga concentrada
Fire over a structural system is considered an accidental load and can generate structural collapses. The catastrophic effects of a fire on a structural system should always be avoided with preemptive actions. Therefore, it is essential to have the appropriate knowledge of the structure behavior under fire and to take appropriate actions to avoid its collaps
Publicado em: 2008
-
11. Comportamento de vigas levementes armadas em concreto de alto desempenho
This study presents the results of an experimental investigation of a set of 10 reinforced high performance concrete beams. The models were distributed in 5 series. Each series consisted of two beams with and without web reinforcement, except for one of the series, whose beams had only tension reinforcement. The primary design variable was the concrete compr
Publicado em: 2008
-
12. A development of a finite element method based on a novel theory of laminated composite beam.
In the analysis of composite beams (laminate or sandwiches), sometimes it is very important to estimate the effect of the transverse shear (direction z). Many works about this theme were already developed (beam and plate theories, Zig-Zag theories, full three-dimensional approaches), each one with its own advantages and disadvantages (intrinsic inaccuracy, l
Publicado em: 2008