Composites Resin
Mostrando 13-24 de 232 artigos, teses e dissertações.
-
13. Fire exposure behavior of epoxy reinforced with jute fiber applied to ceramic tiles for a ventilated facade system
Civil construction seeks to increase the useful life of the facades of buildings. Installing a ventilated facade is one way to accomplish this due to aesthetic and technical advantages. Ceramic tiles are the main products used as the covering. To the back face of a tile, a bidirectional screen of glass fiber is adhered using epoxy resin. This set forms a com
Mat. Res.. Publicado em: 18/07/2019
-
14. Solvent Degradation and Polymerization Shrinkage Reduction of Resin Composites Using Isobornyl Methacrylate
Resumo O objetivo nesse estudo foi utilizar o isobornil metacrilato (IBOMA) como monômero combinante ou substituinte na matriz resinosa de resinas compostas odontológicas. Para tanto, a matriz resinosa foi formulada com 60 % em peso de BisGMA e 40 % em peso de monômero diluente. O TEGDMA foi utilizado como único monômero diluente para o grupo controle c
Braz. Dent. J.. Publicado em: 03/06/2019
-
15. Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use
Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) fo
Braz. Dent. J.. Publicado em: 03/06/2019
-
16. Composite-derived monomers affect cell viability and cytokine expression in human leukocytes stimulated with Porphyromonas gingivalis
Abstract Objectives: Dental composites release unreacted resin monomers into the oral environment, even after polymerization. Periodontal cells are, therefore, exposed to substances that potentially elicit the immune inflammatory response. The underlying molecular mechanisms associated with the interaction between resin monomers and human immune cells found
J. Appl. Oral Sci.. Publicado em: 03/06/2019
-
17. Physicomechanical and thermal analysis of bulk-fill and conventional composites
Abstract The aim of this study was to evaluate the degree of conversion (DC) and the thermal stability of bulk-fill and conventional composite resins. Eleven composite resin samples were prepared to evaluate the DC, Vickers microhardness (VMH), mass and residue/particle loss, glass transition temperature (Tg), enthalpy, and linear coefficient of thermal expa
Braz. oral res.. Publicado em: 18/03/2019
-
18. Avaliação do manchamento e da rugosidade superficial de materiais restauradores diretos após diferentes sistemas de polimento: estudo in vitro
Resumo Introdução Com o avanço estético e tecnológico dos compósitos restauradores diretos, a procura pela Odontologia Éstética tem aumentado. Objetivo Avaliar o manchamento e a rugosidade superficial dos compósitos Filtek Z350 (3M ESPE) e Filtek Bulk Fill (3M ESPE), polidos por diferentes sistemas: Disco SofLex e Disco SofLex diamantado espiral
Rev. odontol. UNESP. Publicado em: 11/03/2019
-
19. Color Stability and Gloss of Esthetic Restorative Materials after Chemical Challenges
Resumo O objetivo foi avaliar as alterações de brilho e cor de materiais restauradores estéticos submetidos ao armazenamento em diferentes bebidas ácidas. Foram preparados espécimes de compósitos de resina (Z350XT (Z350), IPS Empress Direct (ED), Charisma Diamond (CD) e o brilho e a cor (ΔE) de superfície mensurados (n=10). Em seguida, os espécimes
Braz. Dent. J.. Publicado em: 2019-02
-
20. Mechanical Properties and Abrasive Wear of Different Weight Percentage of TiC Filled Basalt Fabric Reinforced Epoxy Composites
Fiber reinforced polymers are very rarely applied as wear-resistant materials because of the lack of good mechanical strength, which adversely affects the properties of the composites. To improve the mechanical and abrasive wear resistant of the composites, fillers are incorporated into the polymers. Hence in this work composites are produced by adding funct
Mat. Res.. Publicado em: 14/01/2019
-
21. Shrinkage stress and elastic modulus assessment of bulk-fill composites
Abstract Bulk-fill composites were introduced in dentistry to accelerate clinical procedures while providing adequate outcomes. Concerns regarding the use of bigger composite increments rely on the polymerization shrinkage and shrinkage stress, which may generate gaps on the adhesive interface and result in a reduced success rate. Objective: To evaluate the
J. Appl. Oral Sci.. Publicado em: 07/01/2019
-
22. Effect of radiant exposure and UV accelerated aging on physico-chemical and mechanical properties of composite resins
Abstract Currently, there is no consensus in terms of defining the minimum radiant exposure values necessary for achieving adequate properties of composite resin. In addition, the long-term influence that radiant exposure has on the properties of composite resins is still questionable. Objective: The objective of this study was to evaluate the effect of radi
J. Appl. Oral Sci.. Publicado em: 07/01/2019
-
23. Multiple-peak and single-peak dental curing lights comparison on the wear resistance of bulk-fill composites
Abstract: The effects of tooth brushing could affect the long-term esthetic outcome of composite restorations. This study evaluated the effect of two different emission spectrum light-curing units on the surface roughness, roughness profile, topography and microhardness of bulk-fill composites after in vitro toothbrushing. Valo (multiple-peak) and Demi Ultra
Braz. oral res.. Publicado em: 17/12/2018
-
24. Effect of different artificial aging protocolson fluorescence of resin composites
ABSTRACT This study evaluated the effect of different artificial aging on fluorescence of resin composites. Forty-five cylindrical specimens (6mm in diameter and 1mm thick) were made of each resin composite: IPS Empress Direct, Filtek™ Z350 XT, and Durafill. A baseline measurement of fluorescence by the direct method using the fluorescence spectrophotomete
Matéria (Rio J.). Publicado em: 06/12/2018