Composite Structures
Mostrando 25-36 de 228 artigos, teses e dissertações.
-
25. Preface to the special issue of the International Symposium on Solid Mechanics (MecSol 2017)
Abstract The International Symposium on Solid Mechanics (MecSol) is a biennial conference which aims to provide a forum to discuss relevant issues associated with solid mechanics. The MecSol 2017 edition was held in the city of Joinville, Brazil, on 26-28 April 2017. Plenary lectures were delivered by researchers from five different countries. The main topic
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
26. Efeito da adição de fibras híbridas na durabilidade de compósitos cimentícios avançados em ambientes úmidos e agressivos
ABSTRACT Reactive powder concrete (RPC) is one type of advanced cementitious composite that has been increasingly used. Its high mechanical strength enables the application of the composite in bolder structures. Considering its recent history of use, there is a lack of knowledge about this materials durability. Therefore, this paper aimed to evaluate the beh
Matéria (Rio J.). Publicado em: 18/10/2018
-
27. Finite element evaluation of the effects of curvature in Lamb waves for composites structural health monitoring
Abstract This work presents the effect of the high curvature to thickness ratio on the characteristics of Lamb Waves propagating over the skins of composite structures. It is accessed how the curvature on composite skins affects the group velocity of the symmetrical (S0) and asymmetrical (A0) wave modes. It is also accessed the gradient of curvature effect,
Lat. Am. j. solids struct.. Publicado em: 11/10/2018
-
28. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
29. Extracción optimizada y purificación parcial de invertasa aislada de S. Cerevisiae en puré de durazno
Abstract The extraction was performed using an autolysis process where enzymes degrade cell structures and release the cytoplasmic contents to the extracellular medium. The autolysis process was carried out in shake flasks with different agitation speeds (50 - 350 rpm) and the concentration of sodium bicarbonate (50 -350 mM NaHCO3) at 40 ° C for 24 hours, u
Rev. Bras. Frutic.. Publicado em: 22/03/2018
-
30. Mode I Interlaminar Fracture Toughness Analysis of Co-Bonded and Secondary Bonded Carbon Fiber Reinforced Composites Joints
Aiming to reduce aircraft weight, aeronautic industry seeks alternative materials and processes used to join its different structural parts. An option to traditional methods are high performance adhesive joints, which reduce weight, number of parts and component final cost, also resulting in higher strength structures. Although, the lack of experimental data
Mat. Res.. Publicado em: 05/02/2018
-
31. A Novel Porous Diamond - Titanium Biomaterial: Structure, Microstructure, Physico-Mechanical Properties and Biocompatibility
ABSTRACT With the aim of introducing permanent prostheses with main properties equivalent to cortical human bone, Ti-diamond composites were processed through powder metallurgy. Grade 1 titanium and mixtures of Ti powder with 2%, 5% and 10 wt% diamond were compacted at 100MPa, and then sintered at 1250°C/2hr/10-6mbar. Sintered samples were studied in the po
An. Acad. Bras. Ciênc.. Publicado em: 11/12/2017
-
32. Polypropylene Composites Manufactured from Recycled Carbon Fibers from Aeronautic Materials Waste
Carbon fiber composites are used in several industries such as, aerospace, automotive, civil engineering, sports goods and technical applications due to its low-weight, strength and stiffness. However, the technology of recycling of these thermosetting polymer composites remains an engineering challenge because of their cross-linked structures that impede th
Mat. Res.. Publicado em: 23/10/2017
-
33. Matrix Damage Detection in Laminated Composite Structures by Discrete and Continuous Wavelet Transforms Using Vibration Modes
ABSTRACT: In this paper it was sought to enhance the potential damage detection, location and quantification of the Discrete and Continuous Wavelet Transforms in thin damaged laminated composite plates by a signal derived from vibration modes. To evaluate the ability of both transforms in the damage prognostic it was also proposed the use of Damage Indexes.
J. Aerosp. Technol. Manag.. Publicado em: 21/09/2017
-
34. PREPARATION AND VISIBLE LIGHT RESPONSIVE PHOTOCATALYTIC ACTIVITY OF Fe3O4/Ni-Al-Ce LDH/Bi2WO6 COMPOSITES
Novel Fe3O4/Ni-Al-Ce LDH/Bi2WO6 composites were prepared through a hydrothermal method and co-precipitation method. The morphologies and structures of the photocatalysts were characterized by XRD, Raman, TEM, UV-vis-DRS, BET surface area and VSM techniques. The photocatalytic performances of the photocatalysts were investigated by the decolorization of methy
Quím. Nova. Publicado em: 2017-09
-
35. Estudo do efeito dos parâmetros de síntese na condutividade elétrica do compósito fluoreto de polivinilideno / polianilina
ABSTRACT The electroactive polymers have been the subject of many studies in the last decade, mainly because its unique properties. They are used in composite structures, which allow its application in many fields, as for example, sensors and artificial muscles. The electrical properties of these composites are influenced by the doping state of the electroac
Matéria (Rio J.). Publicado em: 10/08/2017
-
36. Impact Damage Analysis with Stress Continuity Constraints Fulfilment at Damaged-Undamaged Regions and at Layer Interfaces
Abstract Low-velocity impacts have a relevant importance for safety of laminated and sandwich composite structures, because they are highly susceptible to damage. In this paper, a 3D cost effective zig-zag model is developed in order to efficiently simulate such impacts. It a priori fulfills the continuity of out-of-plane stresses at layer interfaces, the co
Lat. Am. j. solids struct.. Publicado em: 2017-08