Composite Structure
Mostrando 13-24 de 375 artigos, teses e dissertações.
-
13. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
14. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019
-
15. Modification of the Crystalline Structure of ZnO Nanoparticles Embedded Within a SiO2 Matrix due to Thermal Stress Effects
Self-assembled nanocrystals of ZnO were embedded within a SiO2 matrix by a sequential deposit using reactive R.F. sputtering. The ZnO nanoparticles (NP’s) were obtained by depositing a very thin layer (~20 nm) of Zn on the bottom of the valleys of a first SiO2 rough surface and then covered by another SiO2 layer at 500 ºC. The stress produced, due to the
Mat. Res.. Publicado em: 23/09/2019
-
16. Atomization Characteristics of Droplet and Morphologies of Arc Sprayed Ni-Al Particles and Composition Coatings
Droplet atomization characteristics and its morphology in twin-wire arc sprayed (TWAS) Ni-Al were explored in depth. Both numerical model and theoretical method were built for calculating the process of the droplet deformation and breakup in air flow, which based on the standard k-ε model and the volume of fluid (VOF) dual-phase flow model. The atomization
Mat. Res.. Publicado em: 23/09/2019
-
17. Caracterização do composto de CuCr2O4 obtido pelo método da reação de combustão em solução
RESUMO O material CuCr2O4 foi sintetizado pela reação de combustão em solução e tratado termicamente na faixa de 600 à 1100oC, afim de verificar a evolução das fases. O composto foi carcterizado estrutural e morfologicamente por meio das técnicas de Difração de Raios X (DRX), refinamentos pelo método de Rietveld, Microscopia Eletrônica de Varred
Matéria (Rio J.). Publicado em: 16/09/2019
-
18. Use of intrarradicular pins in primary teeth: case report of one year of accompanying
RESUMO Os dentes decíduos possuem um papel importante no crescimento e desenvolvimento da criança, além de serem importantes para o bom desempenho da função mastigatória, fonação, oclusão e estética, são os melhores mantenedores de espaço e guia de erupção para o sucessor permanente. Para região anterior, existem diferentes alternativas de tra
RGO, Rev. Gaúch. Odontol.. Publicado em: 12/09/2019
-
19. SITE INDEX FOR PROSOPIS ALBA PLANTATIONS IN THE SEMI-ARID CHACO THROUGH MIXED MODELS
ABSTRACT The classification of sites through curves of Site Index allows to predict the yield of the planted forests at a certain age of the stand and to plan cultural treatments. The goal of this research was to compare linear and non-linear models of fixed effects vs. mixed non-linear models to estimate the site index in plantations of Prosopis alba var Gr
CERNE. Publicado em: 09/09/2019
-
20. Some Aspects of Numerical Modeling of Steel-Concrete Composite Beams with Prestressed Tendons
Abstract Aspects about the numerical modeling of three-dimensional prestressed steel-concrete composite beams by using the finite element (FE) method are highlighted and commented in this work. Emphasis is given to the numerical treatment of bonded and unbonded tendons. The proposed modeling technique uses curved beam and catenary elements for simulating int
Lat. Am. j. solids struct.. Publicado em: 15/08/2019
-
21. Evaluation of the resistance of trussed slabs with steel formwork in cold formed U profile
Abstract In the last decades, the modernization in structural engineering has increased the use of steel-concrete composite and hybrid systems for slabs, when the adherence in the interface of the materials is present or not, respectively. In addition to the traditional steel deck, a similar solution for precast trussed slabs has been used for small construc
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
22. Benevolence Toward Schizophrenia Scale: Construction and evidence of validation
Resumo Esta pesquisa objetivou construir e buscar evidências de validade da Escala de Benevolência frente à Esquizofrenia. Foram realizados dois estudos na cidade de João Pessoa, Paraíba: o Estudo 1 descreve a construção e busca evidências de validade fatorial da Escala de Benevolência frente à Esquizofrenia com uma amostra de 200 estudantes unive
Estud. psicol. (Campinas). Publicado em: 01/08/2019
-
23. PREPARATION AND CHARACTERIZATION OF THIN-FILM COMPOSITE REVERSE OSMOSIS MEMBRANE ON A NOVEL AMINOSILANE-MODIFIED POLYVINYL CHLORIDE SUPPORT
ABSTRACT Herein, the influence of pure and modified polyvinyl chloride (PVC) support layers on the performance of thin-film composite (TFC) membranes was investigated in water desalination. Accordingly, the PVC support was modified using (3-Aminopropyl) triethoxysilane (APTES) through bulk modification. The supports were synthesized at different doses of APT
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
24. Psychometric parameters of the subscale of hostility from the Symptom Checklist 90 (SCL-90)
Resumo O presente estudo objetivou conhecer os parâmetros psicométricos da subescala de hostilidade da SCL-90. Para isso, traçou-se dois estudos; no Estudo 1 buscou-se conhecer evidências de validade e precisão da subescala de hostilidade. Contou-se com 209 estudantes, com média de 16 anos de idade (DP = 1,29), os quais responderam a Subescala de Hosti
Psico-USF. Publicado em: 10/07/2019