Composite Structure
Mostrando 1-12 de 375 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. Production of nanostructured crystalline composite using residual ashes from flocculated sludge burning process in a poultry slaughterhouse wastewater treatment system
Abstract Nanostructured crystalline composite (activated carbon) was synthesized from residual ashes of the burning process of the sludge generated in the flotation step of a poultry slaughterhouse and was used for Allura red dye adsorption. The ashes were chemically activated using two types of reagents, H2O2 and H3PO4, and the structure, morphology, and su
Cerâmica. Publicado em: 2022
-
3. Challenges of TiO2-composite, as a visible active photocatalyst material for SARS-CoV-2 antiviral compared with the other viruses
The efforts in dealing with COVID-19 in various aspects are continuously being carried out, such as the photocatalytic process. Interestingly, TiO2 plays an important role as an environmentally friendly photocatalyst with a visible and UV absorption range. The increase in the antiviral performance of this compound is further maximized by formulating TiO2-bas
Química Nova. Publicado em: 2022
-
4. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
5. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
6. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
7. An Efficient and Recyclable Sn-Based Phosphotungstic Acid with Tunable Brønsted/Lewis Acidity for Selective Oxidation of Benzyl Alcohol
A series of metal ion (M = Sn2+, Fe3+, Ni2+, Co2+, Ag+, Cu2+) exchanged tungstophosphoric acid (H3PW12O40; TPA) catalysts with tunable Brønsted/Lewis acidity were synthesized and exploited for the oxidation of benzyl alcohol (BzOH) to benzaldehyde (BzH) using hydrogen peroxide (H2O2) as oxidant. The structure of these M-TPA composite salts was also characte
J. Braz. Chem. Soc.. Publicado em: 2021-01
-
8. The latent structure and reliability of the emotional trait section of the Affective and Emotional Composite Temperament Scale (AFECTS)
Abstract Background The Emotional and Affective Composite Temperament (AFECT) model describes originally six traits of volition, anger, inhibition (fear and caution subordinate factors), control, sensitivity, and coping. However, fear and caution have shown opposite relatioships with criteria-variables, indicating factor independence. Objective The curre
Arch. Clin. Psychiatry (São Paulo). Publicado em: 2020-02
-
9. Writing papers with an emphasis on structural geology and tectonics: advices and warnings
Abstract The objective of this short paper was to provide some advice on how to write a geoscience paper of international standard and to warn against some common pitfalls. It is focused on how to structure a paper and stresses the importance of building its contents around a well-defined problem. Furthermore, the importance of moving away from outdated and
Braz. J. Geol.. Publicado em: 13/01/2020
-
10. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
11. Strain-deformation Reconstruction of Carbon Fiber Composite Laminates Based on BP Neural Network
The Carbon Fiber Reinforced Polymer (CFRP) laminate structural components used in the aerospace and military domains require high precision and strong stability. Usually the deformation of these structural components is difficult to be measured directly during operation, but the deformation of the CFRP laminate structure can be reconstructed with strain info
Mat. Res.. Publicado em: 14/11/2019
-
12. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019