Commercially Pure Titanium
Mostrando 1-12 de 71 artigos, teses e dissertações.
-
1. Cell and Bacteria-Baterial Interactions on the Ti10Mo8Nb Alloy After Surface Modification
The purpose of this study is the surface modification of Ti10Mo8Nb experimental alloy by using TiO2 nanostructure growth. Ingots of the Ti10Mo8Nb experimental alloy were produced by fusion from sheets of molybdenum, niobium, and titanium commercially pure in an arc melting furnace under argon atmosphere. The potentiostatic anodic oxidation was performed usin
Mat. Res.. Publicado em: 18/06/2018
-
2. Titanium Coating with Hydroxyapatite and Chitosan Doped with Silver Nitrate
Biomaterials are effective alternatives for tissue substitution, including the bone tissue, since they do not pose risks of transmission of diseases or immune rejection. Nowadays, there is an interest in new materials capable of being associated with other substances which favor bone formation, especially natural biopolymers, in particular chitosan, which ma
Mat. Res.. Publicado em: 01/02/2018
-
3. Simulation of CP-Ti Recrystallization and Grain Growth by a Cellular Automata Algorithm: Simulated Versus Experimental Results
The application of cellular automata in materials science requires the conversion of the automata's rules and abstract general properties to rules and properties associated with the material and phenomena under study. In this paper we propose a model which uses cellular automata to simulate recrystallization and grain growth during isothermal and non-isother
Mat. Res.. Publicado em: 03/04/2017
-
4. Manufacture of nanosized apatite coatings on titanium with different surface treatments using a supersaturated calcification solution
The biomimetic method is used for the deposition of calcium phosphate coatings (Ca - P) on the surface of different biomaterials. However, the application of this method requires long exposure times in order to obtain a suitable layer thickness for its use in medical devices. In this paper, we present a fast approach to obtain apatite coatings on titanium, u
Quím. Nova. Publicado em: 2016-12
-
5. Effects of Peracetic Acid on the Corrosion Resistance of Commercially Pure Titanium (grade 4)
Resumo O objetivo deste estudo foi avaliar a resistência à corrosão de titânio puro grau 4 (cp-Ti-4) submetido à desinfecção com ácido peracético a 0,2% e 2% durante diferentes períodos de imersão por meio do teste de polarização potenciodinâmica anódica em saliva artificial ácida e neutra. Amostras cilíndricas de cp-Ti-4 (5 mm x 5 mm) foram
Braz. Dent. J.. Publicado em: 2015-12
-
6. Properties and Performance of Ultrafine Grained Titanium for Biomedical Applications
The use of materials for biomedical applications has become vital to enhance the quality of life and longevity of human beings. Commercially pure titanium (cpTi) and titanium alloys are the most adequate materials for some biomedical applications, but cpTi and the Ti-6Al-4V alloy (Ti G5) have limitations for biomedical application due to low mechanical stren
Mat. Res.. Publicado em: 03/11/2015
-
7. Caracterización de semielaborados de aleaciones de titanio procesadas por extrusión y laminación perforación (proceso Mannesmann)
ABSTRACTFor the manufacture of seamless pipes and tubes are used, as raw materials, hollow bars from hot deformation processes like extrusion and rotary tube piercing (Mannesmann process). Starting from these semi-elaborated products and by means of successive cross sections reductions through tube drawing or tube rolling (cold pilgering) the requested final
Matéria (Rio J.). Publicado em: 2015-09
-
8. Microcosm Biofilm Formation on Titanium Surfaces
Risk factors associated with peri-implantitis are related to the biofilm composition around the implant and the ability of bacterial adhesion. This study evaluated the biofilm formation on different surfaces of commercially pure titanium (CP Ti) grade 4 after 12, 24, 48 and 168 hours using the microcosm technique and scanning electron microscopy (SEM). The f
Mat. Res.. Publicado em: 2015-08
-
9. Effect of cleanser solutions on the color of acrylic resins associated with titanium and nickel-chromium alloys
This study evaluated the effect of cleanser solutions on the color of heat-polymerized acrylic resin (HPAR) and on the brightness of dental alloys with 180 immersion trials. Disk-shaped specimens were made with I) commercially pure titanium, II) nickel-chromium-molybdenum-titanium, III) nickel-chromium molybdenum, and IV) nickel-chromium-molybdenum beryllium
Braz. oral res.. Publicado em: 11/06/2014
-
10. Titanium bioactivity surfaces obtained by chemical/electrochemical treatments
There are various surface treatments used to modify titanium surfaces to render it bioactive. In this study commercially pure titanium surfaces (cp Ti), grade 2 were modified by acid etching (AE) and anodic oxidation (OA) in order to evaluate the bioactivity in vitro of these surfaces using the simulated body fluid (SBF). The AE was realized using a mixture
Matéria (Rio J.). Publicado em: 2014-03
-
11. Tensile and Flexural Strength of Commercially Pure Titanium Submitted to Laser and Tungsten Inert Gas Welds
Este estudo avaliou a resistência à tração e à flexão de soldas feitas com gás inerte de tungstênio (TIG) em amostras de titânio comercialmente puro (Ti CP) em comparação com a solda a laser. Sessenta amostras cilíndricas (diâmetro de 2 mm e espessura de 55 mm) foram distribuídas aleatoriamente em três grupos para cada ensaio (n=10): sem solda
Braz. Dent. J.. Publicado em: 2013-12
-
12. Mechanical strength and analysis of fracture of titanium joining submitted to laser and tig welding
This study compared the tensile strength and fracture mechanism of tungsten inert gas (TIG) welds in cylindrical rods of commercially pure titanium (cp Ti) with those of laser welds and intact samples. Thirty dumbbell-shaped samples were developed by using brass rods as patterns. The samples were invested in casings, subjected to thermal cycles, and position
Mat. Res.. Publicado em: 09/10/2012