Cohesive Models
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Estimation of precompression stress in an Ultisol cultivated with sugarcane
RESUMO Propriedades compressivas do solo são frequentemente utilizadas para entender o processo de compactação. Alternativamente a ensaios laboratoriais, funções de pedo-transferência têm sido usadas para estimar o comportamento mecânico em função de parâmetros físicos do solo. Este trabalho objetivou examinar o impacto da densidade (BD) e do con
Rev. bras. eng. agríc. ambient.. Publicado em: 06/05/2019
-
2. Continuous Modeling Technique of Fiber Pullout from a Cement Matrix with Different Interface Mechanical Properties Using Finite Element Program
Abstract Fiber-matrix interface performance has a great influence on the mechanical properties of fiber reinforced composite. This influence is mainly presented during fiber pullout from the matrix. As fiber pullout process consists of fiber debonding stage and pullout stage which involve complex contact problem, numerical modeling is a best way to investiga
Lat. Am. j. solids struct.. Publicado em: 2016-10
-
3. PARALLEL TOPOLOGICAL SUPPORT FOR FINITE ELEMENT MESHES IN DYNAMIC FRACTURE AND FRAGMENTATION ANALYSES / SUPORTE TOPOLÓGICO EM PARALELO PARA MALHAS DE ELEMENTOS FINITOS EM ANÁLISES DINÂMICAS DE FRATURA E FRAGMENTAÇÃO
Fracture propagation and fragmentation phenomena in solids can be described by Cohesive Zone Models and simulated with the Finite Element Method. Among the computational approaches of recent interest for fracture representation in finite element meshes are those based on cohesive elements. In those approaches, fracture behavior is represented by cohesive ele
Publicado em: 2011
-
4. Fratura na interface de bimateriais : soluções analíticas e numéricas / Bi-material interface fracture: analytical and numerical solutions
Neste trabalho, é estudada a fratura na interface de materiais dissimilares empregando duas metodologias distintas: a Mecânica da Fratura Linear Elástica (MFLE) e os métodos coesivos. O uso da MFLE aplicada a trincas situadas na interface de materiais dissimilares apresenta algumas dificuldades bem conhecidas que podem inviabilizar seu uso, como a presen
Publicado em: 2011
-
5. Influência de variáveis de compactação na estrutura dos solos: caracterizações geotécnica, química, mineralógica e microestrutural / Influence of laboratory compaction variables in soils structure: geotechnical, chemical, mineralogical and microstructural characterizations
This research addressed the effect of laboratory methods of static and dynamic compaction on compaction parameters, mechanical strength and compressibility of three gneiss residual soils (two young and one mature soils) and two granite residual soils (one young and one mature soils) from the Minas Gerais State, Brazil. Disturbed soils samples were collected,
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 09/12/2010
-
6. Os entraves para o surgimento da eficácia coletiva: um estudo de casos em um aglomerado de Belo Horizonte
Crime is a phenomenon that afflicts societies around the world. Regardless of how you present yourself, which are many, is a problem with which all governments have to deal with. Crime is presented in several facets, but we are dealing, in this work, with crimes associated with gangs of drug traffickers in a cluster of Belo Horizonte. Recently another variab
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/02/2010
-
7. Comparação dos ensaios de resistência adesiva por torção e por cisalhamento com fio / A comparison between torsion and wire-loop shear bond strength tests
Objective: verify, by finite element analysis (FEA) and laboratorial tests, if the torsion bond strength test is able to lead adhesive interface to fracture under shear stress and if it would be more advantageous than wire-loop shear test. Material and method: for stress analysis by finite element method, the 3D models of both tests consisted of a resin comp
Publicado em: 2010
-
8. Contribuições ao processo computacional para análise de pedidos de indenização por danos em equipamentos elétricos
The increasing number of refunding requests related to electrical and electronic equipment damages has attracted the attention of the electric utilities, consumers, regulatory and other government agencies. Such concerns are not associated only with the financial contents involved, but especially with the social impacts associated to requests, decisions, con
Publicado em: 2010
-
9. A comunidade latino-americana de Nações - (C.F., parágrafo único, art. 4): o paradigma da União Européia
This study analyzes two paradigms of regional integration, the European Union, and the most advanced model proposed by Latin America, from the structuring of MERCOSUR. Straightforward glimpse the possibility of developing an American community of Nations and their integration. As a result, demonstrate the possibility to consolidate this community, as prescri
Publicado em: 2010
-
10. Nonlinear boundary element models to analyse fracture problems and reliability/optimization models applied to structures submitted to fatigue / Modelos não lineares do método dos elementos de contorno para análise de problemas de fratura e aplicação de modelos de confiabilidade e otimização em estruturas submetidas à fadiga
This work deals with the development of boundary element method (BEM) formulations to be used in engineering problems. Particular attention is given to using these formulations in development of reliability and optimization models applied to fatigue problems. Contributions to BEM formulations are developed, particularly, models that deal with crack growth in
Publicado em: 2009
-
11. Modelos para análise de fratura do concreto simples empregando interfaces coesivas / Models for plain concrete fracture analysis using cohesive interfaces
O concreto é um material de comportamento quase-frágil na ruptura, desenvolvendo uma zona de processo de fratura relativamente grande na ponta de uma fissura principal, na qual ocorrem fenômenos complexos. Modelos de fratura discretos são adequados para estudar tais fenômenos. Neste contexto, o presente trabalho estuda diferentes modelos de fratura disc
Publicado em: 2009
-
12. O metodo dos elementos de contorno dual (DBEM) incorporando um modelo de zona coesiva para analise de fraturas / The dual boundary element method (DBEM) incorporating a cohesive zone model to cracks analysis
A avaliação da influêcia de um modelo coesivo de fratura no comportamento estrutural e a simulação de propagação de fraturas pré-existentes, com a Mecâica da Fratura Elástica Linear (MFEL), em problemas bidimensionais, usando o Método dos Elementos de Contorno Dual (DBEM), é o principal objetivo deste estudo. Problemas elásticos lineares em meio
Publicado em: 2008