Cohesive Interfaces
Mostrando 1-10 de 10 artigos, teses e dissertações.
-
1. Finite element analysis for mechanical characterization of 4D inplane carbon/carbon composite with imperfect microstructure
Finite element mesh of multi-directional 4D carbon/carbon (C/C) composite was reconstructed from 2D images obtained by X-ray tomography. Thus, imperfections in the composite such as voids, misalignment and cross-section distortion of the fibre bundles were directly incorporated in the finite element mesh. 2D images of the composite were also used for the cha
Lat. Am. j. solids struct.. Publicado em: 2014-03
-
2. Influência da ciclagem térmica e mecânica em água na resistência ao cisalhamento da união infraestrutura/porcelana de cobertura de diferentes sistemas totalmente cerâmicos / Shear bond strength of all-ceramics core/veneer interface and its susceptibility to thermal and mechanical cycling
The objective of this study was to evaluate the influence of thermal and mechanical cycling on the shear bond strength of different all-ceramic cores and veneering porcelain interfaces. It was also to characterize chemically the interfaces by energy dispersive spectroscopy (EDS). The allceramic systems tested were lithium dissilicate (DL), zirconia veneered
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 23/05/2011
-
3. PARALLEL TOPOLOGICAL SUPPORT FOR FINITE ELEMENT MESHES IN DYNAMIC FRACTURE AND FRAGMENTATION ANALYSES / SUPORTE TOPOLÓGICO EM PARALELO PARA MALHAS DE ELEMENTOS FINITOS EM ANÁLISES DINÂMICAS DE FRATURA E FRAGMENTAÇÃO
Fracture propagation and fragmentation phenomena in solids can be described by Cohesive Zone Models and simulated with the Finite Element Method. Among the computational approaches of recent interest for fracture representation in finite element meshes are those based on cohesive elements. In those approaches, fracture behavior is represented by cohesive ele
Publicado em: 2011
-
4. Um modelo macro - mesoscópico para a simulação de fratura em concreto simples / Meso ¿ macro model for the simulation of plain concrete fracture
Com a finalidade de estudar processos de fratura em concreto simples, este trabalho propõe uma escala intermediária de análise. Sendo assim, é apresentado um modelo simplificado de duas fases, o qual representa alguns elementos da microestrutra do concreto. Uma fase representa os agregados e a outra a matriz de cimento. Os agregados são considerados el�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
5. Fratura na interface de bimateriais : soluções analíticas e numéricas / Bi-material interface fracture: analytical and numerical solutions
Neste trabalho, é estudada a fratura na interface de materiais dissimilares empregando duas metodologias distintas: a Mecânica da Fratura Linear Elástica (MFLE) e os métodos coesivos. O uso da MFLE aplicada a trincas situadas na interface de materiais dissimilares apresenta algumas dificuldades bem conhecidas que podem inviabilizar seu uso, como a presen
Publicado em: 2011
-
6. Modelos para análise de fratura do concreto simples empregando interfaces coesivas / Models for plain concrete fracture analysis using cohesive interfaces
O concreto é um material de comportamento quase-frágil na ruptura, desenvolvendo uma zona de processo de fratura relativamente grande na ponta de uma fissura principal, na qual ocorrem fenômenos complexos. Modelos de fratura discretos são adequados para estudar tais fenômenos. Neste contexto, o presente trabalho estuda diferentes modelos de fratura disc
Publicado em: 2009
-
7. Análise de propagação arbitrária de descontinuidades fortes em sólidos bidimensionais pelo método dos elementos de contorno / Analysis of arbitrary propagation of strong discontinuities in bidimensional solids using the boundary elements method
O trabalho tem como objetivo trazer contribuições à simulação numérica pelo método dos elementos de contorno (MEC) de formação e propagação de descontinuidades no campo de deslocamentos (descontinuidades fortes) em sólidos bidimensionais. A formação de descontinuidades fortes caracteriza o processo de falha material, que pode estar associado ao
Publicado em: 2008
-
8. Evaluation of the band strength and of the antimicrobial activity of different bracket bonding systems associated with chlorhexidina and fluor / Avaliação da resistência adesiva e da atividade antimicrobiana de diferentes sistemas de colagem de bráquetes associados à clorexidina e ao flúor.
The objective of this in vitro study was to evaluate the influence of the incorporation of fluor and chlorhexidine in the bond strength and in the antimicrobial activity of different bracket bonding systems (Transbond XT System / 3M-Unitek and Enlight System / Ormco) whose respective adhesives were pre-mixed with fluoride varnish (Fluor Protector / Ivoclar-V
Publicado em: 2006
-
9. Microtensile bond strength of current adhesive systems when compared to cohesive strength of sound dentin and a resin-based composite
Purpose: To evaluate the microtensile bond strength (µTBS) to dentin of 4 adhesive systems, the micromorphology of the adhesive/dentin interface and to compare the results to the µTS (cohesive strength) of sound dentin and resin composite. Occlusal surfaces of 24 extracted caries-free human molars were cut flat to expose the dentin surface. They were rando
Materials Research. Publicado em: 2004-12
-
10. Dynamic strength of molecular adhesion bonds.
In biology, molecular linkages at, within, and beneath cell interfaces arise mainly from weak noncovalent interactions. These bonds will fail under any level of pulling force if held for sufficient time. Thus, when tested with ultrasensitive force probes, we expect cohesive material strength and strength of adhesion at interfaces to be time- and loading rate