Cohesive Fracture
Mostrando 1-12 de 33 artigos, teses e dissertações.
-
1. Mechanical and histological evaluation of a titanium device for orthodontic anchorage, placed with or without cyanoacrylate adhesive
RESUMO Objetivos: este estudo teve como objetivo realizar uma avaliação histológica de um mini-implante para ancoragem em Ortodontia. Avaliou-se, também, a carga de cisalhamento e o padrão de fratura imediatamente e após 30 e 60 dias da sua inserção, com ou sem o uso do adesivo N-butil-2-cianoacrilato. Métodos: noventa e seis mini-implantes (Arro
Dental Press J. Orthod.. Publicado em: 01/08/2019
-
2. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019
-
3. Tooth whitening affects bond strength of adhesive systems in enamel
ABSTRACT This study presents how the tooth whitening affects the bond strength and fracture type of three distinct adhesives — a conventional, a self-etching, and a universal adhesive — in enamel. Health bovine incisors were prepared by flattening the labial surface; part of these teeth was submitted to whitening treatment with a peroxide-based product (
Matéria (Rio J.). Publicado em: 06/12/2018
-
4. Mode I Interlaminar Fracture Toughness Analysis of Co-Bonded and Secondary Bonded Carbon Fiber Reinforced Composites Joints
Aiming to reduce aircraft weight, aeronautic industry seeks alternative materials and processes used to join its different structural parts. An option to traditional methods are high performance adhesive joints, which reduce weight, number of parts and component final cost, also resulting in higher strength structures. Although, the lack of experimental data
Mat. Res.. Publicado em: 05/02/2018
-
5. Influence of crosshead speed on failure load and failure mode of restored maxillary premolars
We analyzed the effect of the crosshead speed of an applied load on failure load and failure mode of restored human premolars. Fifty intact, noncarious human premolars were selected. Class II mesio-occlusodistal preparations were made with a water-cooled high-speed preparation machine, and the teeth were restored with composite resin. The specimens were divi
Braz. oral res.. Publicado em: 15/12/2015
-
6. An experimental investigation of static load capacity of AL-GFRP adhesively bonded single lap and double butt lap joints
AbstractThis paper is focused on experimental evaluation and comparison of progressive damage behaviors in adhesively bonded single lap and double butt lap joints between aluminum and glass fiber reinforced plastic (GFRP). The effect of joint design and dissimilarity of adherents on damage evolution of adhesive bonding under tensile quasi static loading is a
Lat. Am. j. solids struct.. Publicado em: 2015-08
-
7. Effect of calcium hydroxide dressing on push-out bond strength of endodontic sealers to root canal dentin
The aim of the present study was to evaluate the effect of calcium hydroxide dressing on the bond strength of three commercially available endodontic sealers (MTA Fillapex, Sealapex, and AH Plus) to root canal dentin. Sixty slices of extracted human canines were obtained from cervical, middle, and apical root thirds. Root canals were standardized and specime
Braz. oral res.. Publicado em: 24/01/2014
-
8. Effect of silica coating and silane surface treatment on the bond strength of soft denture liner to denture base material
OBJECTIVE: This study investigated the effects of different surface treatments on the tensile bond strength of an autopolymerizing silicone denture liner to a denture base material after thermocycling. MATERIAL AND METHODS: Fifty rectangular heat-polymerized acrylic resin (QC-20) specimens consisting of a set of 2 acrylic blocks were used in the tensile
J. Appl. Oral Sci.. Publicado em: 2013-07
-
9. Análise inversa utilizando o método dos elementos de contorno e correlação de imagens digitais / Inverse analysis utilizing the boundary element method and digital image correlation
A identificação de parâmetros físicos e geométricos utilizando medições experimentais é um procedimento comum no tratamento de muitos problemas da ciência e engenharia. Neste contexto, a análise inversa apresenta-se como uma importante ferramenta no tratamento desses problemas. Este trabalho apresenta formulações que acoplam o uso do método dos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/07/2012
-
10. PARALLEL TOPOLOGICAL SUPPORT FOR FINITE ELEMENT MESHES IN DYNAMIC FRACTURE AND FRAGMENTATION ANALYSES / SUPORTE TOPOLÓGICO EM PARALELO PARA MALHAS DE ELEMENTOS FINITOS EM ANÁLISES DINÂMICAS DE FRATURA E FRAGMENTAÇÃO
Fracture propagation and fragmentation phenomena in solids can be described by Cohesive Zone Models and simulated with the Finite Element Method. Among the computational approaches of recent interest for fracture representation in finite element meshes are those based on cohesive elements. In those approaches, fracture behavior is represented by cohesive ele
Publicado em: 2011
-
11. Um modelo macro - mesoscópico para a simulação de fratura em concreto simples / Meso ¿ macro model for the simulation of plain concrete fracture
Com a finalidade de estudar processos de fratura em concreto simples, este trabalho propõe uma escala intermediária de análise. Sendo assim, é apresentado um modelo simplificado de duas fases, o qual representa alguns elementos da microestrutra do concreto. Uma fase representa os agregados e a outra a matriz de cimento. Os agregados são considerados el�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
12. Fratura na interface de bimateriais : soluções analíticas e numéricas / Bi-material interface fracture: analytical and numerical solutions
Neste trabalho, é estudada a fratura na interface de materiais dissimilares empregando duas metodologias distintas: a Mecânica da Fratura Linear Elástica (MFLE) e os métodos coesivos. O uso da MFLE aplicada a trincas situadas na interface de materiais dissimilares apresenta algumas dificuldades bem conhecidas que podem inviabilizar seu uso, como a presen
Publicado em: 2011