Cobalt Ferrite
Mostrando 1-12 de 20 artigos, teses e dissertações.
-
1. Flexible, Large-Area Organic Solar Cells With Improved Performance Through Incorporation of CoFe2O4 Nanoparticles in the Active Layer
Cobalt ferrite (CoFe2O4) nanoparticles (NPs), with an average diameter of about 4-10 nm, were produced by the proteic sol-gel method and successfully doped into the active layer of poly(3-hexylthiophene-2,5-diyl) (P3HT):[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) organic solar cells. Pristine and CoFe2O4 NPs-doped blends of P3HT:PCBM were dispersed in
Mat. Res.. Publicado em: 13/01/2020
-
2. Síntese de CoFe2O4 sobre os suportes MgAl2O4 e ZSM-5 para uso na degradação de poluente orgânico pelo processo foto-Fenton heterogêneo sob irradiação visível e solar
RESUMO Neste trabalho, ferrita de cobalto (CoFe2O4) foi sintetizada sobre aluminato de magnésio (MgAl2O4) e zeólita ZSM-5 e a atividade catalítica desses materiais na reação foto-Fenton visando a decomposição de um poluente orgânico em solução aquosa foi avaliada. Ferrita de cobalto foi sintetizada sobre os suportes pela rota solvotérmica. Os mate
Matéria (Rio J.). Publicado em: 25/11/2019
-
3. Catalytic Ozonation of Melanoidin in Aqueous Solution over CoFe2O4 Catalyst
In this work, cobalt ferrite (CoFe2O4) was synthesized by solvothermal route for application as a catalyst in the ozonation reaction for the decolorization and mineralization of melanoidin from aqueous solution. The structural properties of CoFe2O4 sample were investigated by X-ray diffraction (XRD), nitrogen adsorption-desorption isotherms, Fourier-transfor
Mat. Res.. Publicado em: 08/11/2018
-
4. Tunable Magnetic and Electrical Properties of Cobalt and Zinc Ferrites CO1-XZnXFe2O4 Synthesized by Combustion Route
Co and Zn ferrites with general formula CO1-XZnXFe2O4 (x = 0; 0,2 and 0,8) were synthesized by combustion reaction method, using urea as fuel. The structure of inverse-spinel-type ferrite were characterized through XRD using Rietveld refinement method to identify, quantify phases and determine lattice parameters. The crystallites had mean size of 37,33 nm, 4
Mat. Res.. Publicado em: 12/03/2018
-
5. Mechanical, Magnetic, and Microstructural Characterization of Ni0.9Co0.1Fe2O4 Produced by the Ceramic Method
Ni-Co ferrites, especially the ones with lower cobalt fractions, are candidate materials for applications in magnetomechanical sensors and electromagnetic wave absorbers. This work studied the microstructure, magnetostriction, flexural strength, and complex magnetic permeability of Ni0.9Co0.1Fe2O4, presenting data that weren't covered by previous literature
Mat. Res.. Publicado em: 22/02/2018
-
6. Copper Cobalt Magnetic Ceramic Materials Characterization at Terahertz Frequencies
ABSTRACT: This study presents the complex index of refraction and the complex permittivity of a magnetic ceramic material made of copper, cobalt, and iron oxides. The index of refraction and the extinction coefficient of the CuCo-ferrite exhibit an almost frequency independent behavior and were averaged to n = 3.62 ± 0.05 and k = 0.06 ± 0.02, respectively,
J. Aerosp. Technol. Manag.. Publicado em: 2017-06
-
7. Al and PEG Effect on Structural and Physicochemical Properties of CoFe2O4
In this work, pure and Alumina doped cobalt ferrite nanoparticles CoFe2−xAlxO4 (for x = 0.44) have been synthesized by the sol gel method. The influence of alumina doping on the morphological and mechanical properties of CoFe2O4 nano-particles were investigated by means of X-ray powder diffraction (XRD) and rietveld analysis. XRD analysis confirmed that th
Mat. Res.. Publicado em: 06/03/2017
-
8. Investigation of Structural, Morphological, Magnetic Properties and Biomedical applications of Cu2+ Substituted Uncoated Cobalt Ferrite Nanoparticles
ABSTRACT In the present work, Cu2+ substituted cobalt ferrite (Co1-xCuxFe2O4, x = 0, 0.3, 0.5, 0.7 and 1) magnetic nanopowders were synthesized via chemical co-precipitation method. The prepared powders were investigated by various characterization methods such as X-ray diffraction analysis (XRD), scanning electron microscope analysis (SEM), vibrating sample
Braz. arch. biol. technol.. Publicado em: 23/01/2017
-
9. Fabricación de alúmina anódica porosa de bajo costo: Un estudio comparativo de la morfología producida por uno y dos pasos de anodizado
ABSTRACT A simple and low cost method for the fabrication of Nanoporous alumina templates with potential applications for nanowires fabrication is described. As raw material, commercial aluminum has been used. The nanoporous templates obtained have a mean pore diameter of (20 ± 4) nm. The fabrication process consists mainly of two-step anodization. Both ste
Matéria (Rio J.). Publicado em: 2016-09
-
10. Chemical modification of cobalt ferrite nanoparticles with possible application as asphaltene flocculant agent
Asphaltenes can cause enormous losses in the oil industry, because they are soluble only in aromatic solvents. Therefore, they must be removed from the petroleum before it is refined, using flocculant agents. Aiming to find new materials that can work as flocculant agents to asphaltenes, cobalt ferrite nanoparticles were chemically modified through acid-base
Mat. Res.. Publicado em: 02/04/2013
-
11. SÍNTESE E CARACTERIZAÇÃO DO SISTEMA ESPINÉLIOS CO1-XCUXFE2O4 (X = 1,0, 0,75,0,50, 0,25, 0,0) PELO MÉTODO DOS PRECURSORES POLIMÉRICOS / SYNTHESIS AND CHARACTERIZATION SYSTEM SPINELS CO1-XCUXFE2O4 (X = 1.0, 0,75,0,50, 0.25, 0.0) BY POLYMERIC PRECURSOR METHOD
As ferritas são óxidos compostos, termicamente estáveis, que apresentam estruturas cristalinas equivalentes as do mineral espinélio. Estas retêm propriedades dielétricas, magnéticas e catalíticas específicas. Neste sentido, este trabalho objetiva avaliar a síntese de estruturas espinélios Co1-xCuxFe2O4 (x = 1,0, 0,75, 0,25, 0,0) pelo método do pr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/09/2012
-
12. Nanopartículas magnéticas de cobalto metálico e ferrita de cobalto recobertas com ouro como materiais biocompatíveis visando aplicações em biomedicina / Magnetic nanoparticles of gold-coated cobalt and cobalt ferrite as biocompatible materials for biomedical applications
Atualmente, as nanopartículas superparamagnéticas despertam enorme interesse científico devido sua grande variedade de aplicações em biomedicina, tanto na área de diagnóstico quanto no tratamento de enfermidades. Embora muitos materiais vem sendo estudados, os óxidos de ferro (magnetita e maghemita) apresentam maiores avanços nos estudos para aplica
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/05/2012