Coating Particle
Mostrando 1-12 de 68 artigos, teses e dissertações.
-
1. Effect of TiC Particles Concentration on Microstructure and Properties of Ni-TiC Composite Coatings
A kind of novel anti-wear Ni-TiC composite coatings was deposited successfully on 42CrMo steel by pulsed electrodeposition method with various TiC particles concentration. The effect of TiC concentration on morphologies and properties of Ni-TiC composite coatings were investigated and the optimum concentration of TiC particle was obtained. Results demonstrat
Mat. Res.. Publicado em: 20/01/2020
-
2. β-Tricalcium phosphate shaped by replica method
Resumo Biomateriais, como o fosfato tricálcico, podem apresentar diferentes taxas de reabsorção no organismo que dependem das suas propriedades físico-químicas sendo que a condição superficial, tais como morfologia, tamanho de partículas e porosidade, é de fundamental importância. Assim, neste trabalho, estudou-se o recobrimento da matriz Luffa cyl
Cerâmica. Publicado em: 14/11/2019
-
3. REMOVAL OF NITRATE FROM DRINKING WATER BY USING PdCu STRUCTURED CATALYSTS BASED ON CORDIERITE MONOLITHS
Abstract Structured catalysts were prepared, characterized and evaluated in NO3 - removal from drinking water. Different suspensions containing a previously optimized PdCu/5wt% ZrO2-Al2O3 powder catalyst (hereinafter PdCu/5ZAp) were prepared and deposited on cordierite monoliths by washcoating. The effect of suspension concentration, the particle size, the i
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
4. Nanostructured polymeric system based of cashew gum for oral admnistration of insulin
ABSTRACT The subcutaneous administration of insulin has been the treatment of millions of diabetics in the world. However, for such via insulin is invasive and not mimics the physiological action causing side effects. The oral route would be the most physiological and comfortable option, but the oral bioavailability of insulin is low by proteolytic activity
Matéria (Rio J.). Publicado em: 16/09/2019
-
5. RHEOLOGICAL BEHAVIOR OF A SILVER AQUEOUS NANOFLUID STABILIZED WITH AMINOSILANE-BASED SURFACTANT UNDER CONFINED FLOW
ABSTRACT The rheological behavior of an aqueous suspension of silver nanoparticles stabilized with aminosilane-based surfactant flowing under confinement was investigated. Three stability levels were defined based on the zeta potential: high (41.73 mV, pH 4.3), medium (10.44 mV, pH 7.4), and low (0.74 mV, pH 8.6). Furthermore, the preliminary investigation s
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
6. DEVELOPMENT OF AN AUTOMATED METHOD TO PERFORM A QUANTITATIVE STUDY OF PARTICLE SIZE DISTRIBUTION AND THE EFFECT OF A CONDUCTIVE LAYER IN SCANNING ELECTRON MICROSCOPY
The determination of particle size distribution is an important parameter for controlling industrial processes, particularly in the field of pharmaceuticals. It is also an important parameter for characterizing nanoparticles. The best technique for determining particle size distribution is scanning electron microscopy. The process of counting particles is ty
Quím. Nova. Publicado em: 27/05/2019
-
7. Fe3O4-TiO2 and Fe3O4-SiO2 Core-shell Powders Synthesized from Industrially Processed Magnetite (Fe3O4) Microparticles
The interest for core-shells has been increased in the recent years due to their improved and modifiable properties. In this work, Fe3O4-TiO2 and Fe3O4-SiO2 core-shells were successfully synthesized from an industrially produced magnetite-rich powder with micro- and nanometric particle sizes, superparamagnetic behavior and saturation magnetization of 49 emu/
Mat. Res.. Publicado em: 09/05/2019
-
8. Optimization of the conditions for producing water-in-oil-in-water microemulsions and spray-dried microcapsule of tomato extract powder
Abstract The objective of this study was to investigate optimized conditions for producing water-in-oil-in-water (W/O/W) microemulsions and spray-dried microcapsules of tomato extracts. The condition of highest yield for W/O/W microemulsification was optimized by response surface methodology (RSM). The independent variables were ratio of tomato extract to M
Food Sci. Technol. Publicado em: 22/10/2018
-
9. Optimized conditions to produce water-in-oil-in-water nanoemulsion and spray-dried nanocapsule of red ginseng extract
Abstract The aim of this study was to optimize conditions for producing water-in-oil-in-water (W/O/W) nanoemulsion and spray-dried nanocapsule of red ginseng extract. Based on emulsion stability and average particle size analysis, optimum conditions to produce W/O/W nanoemulsion were: ratio of core to coating material, 3:7; primary emulsifier, 10% polyglyce
Food Sci. Technol. Publicado em: 19/04/2018
-
10. Physiochemical and Optical Properties of GdF3:Pr@LaF3@SiO2 Microspheres
The polyol-based co-precipitation process was employed for synthesis of GdF3:Pr (core) and GdF3:Pr@LaF3 (core-shell) microspheres (MSs). Subsequently, an amorphous silica layer was deposited surrounding the core-shell MSs, which was verified from high-resolution transmission electron microscopy (TEM), energy dispersive X-ray analysis (EDX) and FTIR results.
Mat. Res.. Publicado em: 12/04/2018
-
11. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
12. Experimental study on the self-suspending proppant-laden flow in a single fracture
Abstract The flow of proppant-laden fluid (PLF) in the fracture is a typical problem of solid-liquid two phase flow, and the transportation and deposition of proppants are essential to determine the flow conductivity of hydraulic fracturing. The self-suspending proppant with a water soluble surface coating is a newly presented supporting material and has gre
REM, Int. Eng. J.. Publicado em: 2018-04