Coal
Mostrando 25-36 de 630 artigos, teses e dissertações.
-
25. Epidermal morphology of the cordaitalean leaf Noeggerathiopsis brasiliensis nom. nov. from the southern Paraná Basin (Lower Permian, Rio Bonito Formation) and paleoenvironmental considerations
Abstract A Brazilian cordaitalean leaf is reassigned and redescribed based on cuticular analysis. The new name Noeggerathiopsis brasiliensis is erected as a replacement for Rufloria gondwanensis Guerra-Sommer. The leaf adpressions come from a tonstein layer within a Sakmarian coal seam of the Faxinal Coalfield, southern Paraná Basin, Brazil (U-Pb SHRIMP mea
Braz. J. Geol.. Publicado em: 01/07/2019
-
26. Pyrite utilization in the carboniferous region of Santa Catarina, Brazil - Potentials, challenges, and environmental advantages
Abstract The main coal seams explored in the coal region of Santa Catarina are Barro Branco (BB) and Bonito (BO). Owing to the association with the mineral matter, the tailings generated in the beneficiation are arranged in disposal areas, and subject to the generation of acid mine drainage (AMD). The objective of this study was to evaluate the use of pyrite
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
27. Influence of moisture and particle size on coal blend bulk density
Abstract Coal blend bulk density is an important property in the coking process. Some variables, such as moisture and particle size, which are controlled or measured in the coal beneficiation process in steel mills, exert a strong influence on this feature. This study aims to understand the density variation of coal blends by the influence of moisture and pa
REM, Int. Eng. J.. Publicado em: 2019-06
-
28. Investigation of the Roof Presplitting and Rock Mass Filling Approach on Controlling Large Deformations and Coal Bumps in Deep High-Stress Roadways
Abstract Roadway deformation and coal bumps are major challenges for underground engineering. Taking the Lu'an mining district in Shanxi Province as an example, the failure mechanism of deep high-stress roadway was studied. Numerical simulations and the similar material test were performed to investigate the effect of the roof presplitting and rock mass fill
Lat. Am. j. solids struct.. Publicado em: 27/05/2019
-
29. Application of SnO2 Nanoparticles and Zeolites in Coal Mine Methane Sensors
We evaluated solid-state sensors (MOS) manufactured using nanostructured tin oxide (SnO2) obtained by different synthesis methods for selectivity, response and repeatability at different operating temperatures and methane concentrations. In addition, Zeolite 13X pellets were placed in front of the sensors to improve CH4 selectivity in the presence of CO2. Th
Mat. Res.. Publicado em: 27/05/2019
-
30. Peças Cerâmicas fabricadas usando pó de granito com adição dos produtos da combustão do carvão mineral: Caracterização Mecânica
RESUMO Foi estudada a viabilidade técnica da utilização de resíduos de granito como matéria prima na fabricação de corpos de prova cerâmicos, com adições dos Produtos da Combustão do Carvão Mineral (PCC’s) como fase reforço. Os materiais utilizados foram granito Asa Branca (RGAB) e os Produtos da Combustão do Carvão mineral (PCC´s), nas con
Matéria (Rio J.). Publicado em: 20/05/2019
-
31. Characterization of coal briquettes using tar as a binding material for use in a coke oven
Abstract In order to increase competitiveness in the steel industry through reduction of the cost of coal mixtures and increase in the quality productivity of coke in the oven, this research was developed with the aim of increasing the bulk density through briquetting of low power coking coal using tar as a binding material. Initially an industrial scale dou
REM, Int. Eng. J.. Publicado em: 2019-03
-
32. Combustibility behavior of PCI coals, green petroleum coke and charcoal fines used as fuel for injection into blast furnace tuyeres
Abstract Pulverized coal injection (PCI) into blast furnace tuyeres is widely used by integrated steel mills worldwide to reduce the consumption of coke and costs. High injection rates are desirable. The big challenge is to achieve them with cheaper and lower quality raw materials, without losing the quality of the hot metal and the productivity of the blast
REM, Int. Eng. J.. Publicado em: 2019-03
-
33. Selection of materials for blast furnace injection using quality indicators
Abstract The injection of pulverized materials is a technique used in most of the blast furnaces in the world to reduce coke and charcoal consumption. In addition, injection is one of the main variables of the blast furnace heat control. Coal is the most used material for the injection, but some industries have been attempting to use other materials, usually
REM, Int. Eng. J.. Publicado em: 2019-03
-
34. Thermal Behavior of Pyrite in the CO2 and N2 Atmosphere for Obtaining Pyrrhotite: A Magnetic Material
In the southern of Brazil the coal is composed of a large amount of pyrite (FeS2), an environmental problem for this region because the pyrite turns a waste. This work investigated the behavior of pyrite in CO2 and N2 atmospheres, aiming to identify better thermal treatment conditions of the pyrite waste that favor obtaining a material with magnetic properti
Mat. Res.. Publicado em: 18/10/2018
-
35. Isolation, Characterization and Symbiotic Efficiency of Nitrogen-Fixing and Heavy Metal-Tolerant Bacteria from a Coalmine Wasteland
ABSTRACT: Areas affected by coal mining can be recovered by revegetation with leguminous plants associated with nitrogen-fixing bacteria. This study addressed the isolation and characterization of native nitrogen-fixing bacteria from coalmine wasteland under different vegetation restoration approaches using Macroptilium atropurpureum (DC) Urb and Vicia sativ
Rev. Bras. Ciênc. Solo. Publicado em: 13/09/2018
-
36. Soil Macrofauna as Indicator of Environmental Recovery in a Mining Area
ABSTRACT This work aimed to characterize the composition of the soil macrofauna in non-mined and mined areas recovered with native vegetation, Eucalyptus dunnii Maiden and Acacia mearnsii De Wild. plantations, in a coal mine. Five areas were evaluated, namely, three non-mined areas and two mined and recovered areas. Six soil samples per area were collected
Floresta Ambient.. Publicado em: 13/09/2018