Ceramic Production
Mostrando 13-24 de 154 artigos, teses e dissertações.
-
13. Caracterização mecânica do gesso para revestimento produzido no Polo Gesseiro do Araripe
Resumo O gesso é um material de grande uso na construção civil, destacando-se seu emprego como pasta de gesso para revestimento. No Brasil, o Polo Gesseiro do Araripe é o maior produtor. Percebe-se a necessidade de conhecimento das propriedades e características desse material, principalmente, com foco no produto acabado como revestimento interno em par
Ambient. constr.. Publicado em: 03/10/2019
-
14. Evaluation of the pozzolanic activity of red ceramic waste using mechanical and physicochemical methods
Resumo Materiais cimentícios alternativos podem reduzir potencialmente o impacto ambiental da extração de cal e a produção de cimento Portland. Resíduos de cerâmica vermelha podem ser triturados em partículas finas e usados como fíler ou adição pozolânica em argamassas de cimento Portland e cal. Este estudo apresenta a avaliação da atividade po
Cerâmica. Publicado em: 15/08/2019
-
15. Recycling ceramic waste as a raw material in sanitary ware production
Resumo Este estudo caracterizou o resíduo de louças sanitárias descartadas que não atendiam aos requisitos de qualidade. Para compreender a composição de tal resíduo, as amostras foram coletadas, processadas e caracterizadas. Este resíduo de cacos de louça cerâmica moídos foi usado para substituir o pó de granito utilizado nas massas cerâmicas e
Cerâmica. Publicado em: 15/08/2019
-
16. Uma revisão sobre a terminologia e classificação das cerâmicas brancas
Resumo A terminologia dos produtos cerâmicos no mercado e mesmo a encontrada em diversos artigos e livros carece de uma linguagem uniforme quanto aos diversos tipos de produtos das cerâmicas brancas. Ela deve ser norteada por parâmetros técnicos, mas precisa respeitar também a tradição e o histórico de uso e desenvolvimento desses artigos. As diferen
Cerâmica. Publicado em: 15/08/2019
-
17. Use of Firewood Ash Waste in Electrical Siliceous Porcelain
The use of firewood ash waste for the production of electric porcelain can represent an important technological and environmental alternative for the final disposal of this abundant solid waste material. This work aims to study the effect of replacing of sodium feldspar (albite) for firewood ash waste in electrical siliceous porcelain formulation. The firewo
Mat. Res.. Publicado em: 05/08/2019
-
18. Calcium phosphate submicrometric fibers produced by solution blow spinning
The purpose of this work was to produce submicrometric hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) biphasic fibers by means of solution blow spinning (SBS). This method was chosen due to its lower cost and higher production rate than those of electrospinning, which is normally employed in ceramic fiber production. The fibers thus obtained were
Mat. Res.. Publicado em: 18/04/2019
-
19. Production and Characterization of a Silica-Alumina Membrane Using Novel Tubular Freeze-Cast Substrates
Development of new ceramic membranes has recently grown due to its superior thermal and mechanical stability. An interesting approach to manufacture asymmetric membranes is the production of aligned pore structure by the freeze-casting method. The lack of studies involving membrane production with tubular freeze-cast substrates warrants more research. In thi
Mat. Res.. Publicado em: 11/02/2019
-
20. Objective criterion for evaluation of the quality decoration in ceramic floor tile production prior to the sintering process
Abstract In the ceramic tile decoration process, the set of variables that can cause hue variation is quite wide and independent of the methodology used in the production. The understanding of the effects of these variables over the final expected result is of great importance to the producers, especially if it could be done before the ceramic tile’s sinte
Cerâmica. Publicado em: 2019-01
-
21. Avaliação da adição de resíduos de vidro sodo-cálcico e erva-mate em matriz cerâmica
Resumo O presente trabalho avaliou os efeitos da adição de resíduos de vidro sodo-cálcico e de erva-mate sobre a absorção de água, porosidade e resistência mecânica de um material cerâmico. Os pós homogeneizados foram compactados por prensagem uniaxial e submetidos a queima de 900 e 1100 °C a 2 °C.min-1. Os resultados mostraram que a adição de
Cerâmica. Publicado em: 2019-01
-
22. Use of Experimental Design to Evaluate the Effect of the Incorporation of Quartzite Residues in Ceramic Mass for Porcelain Tile Production
The potential of using quartzite residues in the composition of an industrial ceramic mass for porcelain tile production was investigated through experimental design. Chemical, physical and microstructural analyses were accomplished to understand how the incorporation of quartzite residues affects the material, before and after sintering. Central composite d
Mat. Res.. Publicado em: 29/10/2018
-
23. Production of Ba2AlNbO6 Ceramics and Study of their Stability in Crude Petroleum for the Conservation of Metallic Sensing Elements Used in Petroleum Extraction
In the present work niobium based complex cubic perovskite oxide Ba2AlNbO6 ceramics were produced, characterized and their stability in crude petroleum environment was studied for inert ceramic embedding used in petroleum extraction. Ba2AlNbO6 ceramic powder was prepared by means of thermo-mechanical processing. Structural characteristics of calcined materia
Mat. Res.. Publicado em: 26/07/2018
-
24. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12