Recycling ceramic waste as a raw material in sanitary ware production
AUTOR(ES)
Silva, T. H.
FONTE
Cerâmica
DATA DE PUBLICAÇÃO
15/08/2019
RESUMO
Resumo Este estudo caracterizou o resíduo de louças sanitárias descartadas que não atendiam aos requisitos de qualidade. Para compreender a composição de tal resíduo, as amostras foram coletadas, processadas e caracterizadas. Este resíduo de cacos de louça cerâmica moídos foi usado para substituir o pó de granito utilizado nas massas cerâmicas em 5%, 10%, 25%, 50% e 100%. As misturas foram avaliadas quanto à densidade, reologia, retração linear, absorção de água e resistência à flexão. Os resultados de viscosidade e deformação piroplástica em barbotinas contendo resíduo foram melhores que a barbotina padrão empregada em um processo de produção. Resultados de densidade, absorção de água e retração linear não mostraram diferenças significativas em relação às amostras de controle. Ainda que a substituição de granito superior a 5% tenha reduzido a resistência à flexão, nenhum corpo de prova testado apresentou resistência abaixo do mínimo exigido pela indústria.Abstract This study characterized discarded sanitary ware waste (SWW) that could not meet quality requirements. To understand the composition of such SWW, samples were collected, processed, and characterized. This SWW was used to substitute granite in ceramic slips, and the final recycled sanitary ware compositions of 5%, 10%, 25%, 50% and 100% were obtained. Then, the mixtures were evaluated based on density, rheology, linear shrinkage, water absorption, and flexural strength. The results for viscosity and pyroplastic deformation in specimens containing the ceramic waste were better than the reference slip used in a production line. Results for density, water absorption and linear shrinkage showed no significant difference from the control samples. Although the replacement of more than 5% of granite reduced the flexural strength, no tested specimen was below the minimum value required by the industry.
Documentos Relacionados
- Properties of concrete manufactured with use of ceramic sanitary ware waste as aggregate
- Staphylococcus xylosus fermentation of pork fatty waste: raw material for biodiesel production
- Saccharides as raw material for biochar-like production.
- The Tatuí Formation as a source of raw material in the ceramic pole of Santa Gertrudes (SP)
- Brazilian natural fiber (jute) as raw material for activated carbon production