Ceramic Powder
Mostrando 13-24 de 82 artigos, teses e dissertações.
-
13. Mechanical, Magnetic, and Microstructural Characterization of Ni0.9Co0.1Fe2O4 Produced by the Ceramic Method
Ni-Co ferrites, especially the ones with lower cobalt fractions, are candidate materials for applications in magnetomechanical sensors and electromagnetic wave absorbers. This work studied the microstructure, magnetostriction, flexural strength, and complex magnetic permeability of Ni0.9Co0.1Fe2O4, presenting data that weren't covered by previous literature
Mat. Res.. Publicado em: 22/02/2018
-
14. Study of the microstructure and mechanical properties of beta tricalcium phosphate-based composites with alumina addition produced by powder metallurgy
Abstract The use of alumina as a reinforcement in metallic and ceramic matrix is well-known. The purpose of this study was to investigate the effect of alumina addition according to its amount on the microstructural and mechanical behavior of tricalcium phosphate ceramic (TCP), more specifically the β-TCP. Although β-TCP has excellent bioactive and biocomp
REM, Int. Eng. J.. Publicado em: 2017-12
-
15. Cellular Ceramics Produced from Ceramic Shell: Processing and Characterization
In this work, ceramic shell (mullite source), an industrial solid waste from the lost-wax casting process, after crushing and milling steps, was used and evaluated as an alternative raw material source for the production of cellular ceramics for high temperature applications (> 1400 °C). The obtained ceramic shell powder, with particle size distribution (d5
Mat. Res.. Publicado em: 09/11/2017
-
16. Preparation and Characterization of Nanoscale Cobalt Blue Pigment for Ceramic Inkjet Printing by Sol-Gel Self-Propagating Combustion
Cobalt blue pigments were prepared by self-propagating combustion followed by sol-gel method using aluminum nitrate and cobalt nitrate as the raw material. X ray diffraction (XRD), scanning electron microscopy (SEM), fiber optic spectrometer and colorimetric analysis were used to investigate the effect of reaction temperature, metal ion concentration and dis
Mat. Res.. Publicado em: 27/07/2017
-
17. Effect of LZSA Glass-Ceramic Addition on Pressureless Sintered Alumina. Part I: Grain Growth
The aim of this study was to evaluate the effect of an 11.6Li2O-16.8ZrO2-68.2SiO2-3.4Al2O3 (LZSA) glass ceramic on the grain growth of alumina obtained by pressureless sintering. Three contents of the LZSA glass ceramic (7, 15, and 21 vol%; mean particle size of 1.52 µm) and three types of alumina (mean particle sizes of 0.5, 1.7, and 2.8 µm) were used. Th
Mat. Res.. Publicado em: 05/06/2017
-
18. Effect of High Energy Milling Time of the Aluminum Bronze Alloy Obtained by Powder Metallurgy with Niobium Carbide Addition
The aluminum bronze alloy is part of a class of highly reliable materials due to high mechanical strength and corrosion resistence being used in the aerospace and shipbuilding industry. It's machined to produce parts and after its use cycle, it's discarded, but third process is considered expensive and besides not being correct for environment reasons. Thus,
Mat. Res.. Publicado em: 10/04/2017
-
19. Chemo-Rheological Behavior of Aqueous Titanium Carbide Suspension and Evaluation of the Gelcasted Green Body Properties
Gel-casting is an advanced colloidal processing method for fabricating ceramic green parts. In this project acrylamide-based monomers were used as a gelcasting system. The effects of tetramethylammonium hydroxide and polyethylenimine dispersants on the premix solution containing titanium carbide powder have been studied via observation of the zeta potential
Mat. Res.. Publicado em: 12/12/2016
-
20. Use of Natural Rubber Membranes as Support for Powder TiO2and Ag/TiO2 Photocatalysts
The purpose of this study was to synthesize TiO2-polymer composites able to act as photocatalyst membranes. TiO2 catalysts were prepared using the sol-gel method to contain 0.0, 0.5, 1.0, and 2.0 wt.% of embedded Ag particles, subsequently incorporated into natural rubber latex at a weight fraction of 15%. Samples of these ceramic powders were suspended in a
J. Braz. Chem. Soc.. Publicado em: 2016-03
-
21. Tenacidad a la fractura de compuestos cermets 3Al2O3*2SiO2/Ag manufacturados por molienda de alta energía
The composites known as CERMETS are a combination between ceramics and metallic materials. The properties of these materials are different in comparison to conventional materials and their derivatives. The processing methodology of 3Al2O3*2SiO2 reinforced with silver metallic particles (CERMET) was established and discussed in this research. The final chemic
Matéria (Rio J.). Publicado em: 2016-03
-
22. Effects of air abrasion with alumina or glass beads on surface characteristics of CAD/CAM composite materials and the bond strength of resin cements
ABSTRACT Objective The study aimed to evaluate effects of air abrasion with alumina or glass beads on bond strengths of resin cements to CAD/CAM composite materials. Material and Methods CAD/CAM composite block materials [Cerasmart (CS) and Block HC (BHC)] were pretreated as follows: (a) no treatment (None), (b) application of a ceramic primer (CP), (c)
J. Appl. Oral Sci.. Publicado em: 2015-12
-
23. Production of porous ceramic materialusing different sources of alumina and calcia
ABSTRACTNumerous papers and publications report the use of microporous calcium hexaluminate (CaO.6Al2O3; CA6) as a key raw material for high temperature insulating materials. This material has unique properties with respect to chemical purity and mineral composition. Another important property of CA6 is its structure, which consists of platelet-shaped crysta
Matéria (Rio J.). Publicado em: 2015-09
-
24. Evaluation of the milling efficiency increase of AISI 52100 steel using niobium carbide addition through high energy ball milling
The AISI 52100 is a tool-type steel and is more often used in industry for the production of bearings. After the end of its life cycle, it is discarded or remelted, but both processes are considered expensive. Thus, the possibility of reusing this material through the powder metallurgy (PM) route is considered advantageous, since it transforms a waste into a
Rem: Rev. Esc. Minas. Publicado em: 2015-09