Ceramic Composite
Mostrando 1-12 de 111 artigos, teses e dissertações.
-
1. Effect of LZSA glass-ceramic addition on the erosive wear of pressureless sintered alumina
Abstract This study aims to evaluate the influence of the 11.6Li2O-16.8ZrO2-68.2SiO2-3.4Al2O3 (mol%) glass-ceramic addition (LZSA, 7 to 21 vol%) on the erosive wear of alumina in comparison to values of pure alumina obtained from the literature. Thus, composites were prepared from three commercial alumina of different initial particle sizes. Specimens were o
REM, Int. Eng. J.. Publicado em: 2020-06
-
2. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
3. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Digital smile designing, pressing and stratifying ceramic lithium disilicate veneers to rehabilitate dental agenesis: a clinical report
RESUMO Este é um relato de caso de reabilitação estética anterior com facetas laminadas dos elementos 14 ao 24 confeccionadas com a cerâmica IPSE.max Ceram (Ivoclar -Vivadent), as quais substituíram facetas de resina composta insatisfatórias dos elementos 13 ao 23. Ressalta-se que o paciente possuía agenesia dos elementos 12 e 22, tornando-se necess�
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019
-
5. Silica/Titania Graphite Composite Modified with Chitosan and Tyrosinase Employed as a Sensitive Biosensor for Phenolic Compounds
A mesoporous, high surface area and conductive silica/titania graphite composite modified with chitosan and functionalized with tyrosinase was prepared. The composite was obtained by the sol-gel method and the surface of the resultant material was modified with chitosan solutions containing 5, 10 and 15% by mass. The textural characterization showed that eve
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Evaluation of the Projectile's loss of Energy in Polyester Composite Reinforced with Fique Fiber and Fabric
Firearms threat has always been a matter of personal concern, especially to soldiers in armed conflicts as well as police officers and civilians involved with public security. A multilayered armor system (MAS) is intended to personal protection against high kinetic energy ammunition, such as that used in rifles. MAS layers are normally composed of a front ce
Mat. Res.. Publicado em: 21/10/2019
-
7. Bond strengths of various resin cements to different ceramics
Abstract This study evaluates the shear bond strength (SBS) of various resin cements to different ceramics. Composite resin cylinders of Z100 were fabricated and cemented to disks of feldspathic ceramic (Creation), leucite-reinforced feldspathic ceramic (Empress I), and densely sintered aluminum oxide ceramic (Procera AllCeram) using five resin cements: Pana
Braz. oral res.. Publicado em: 14/10/2019
-
8. Influence of Pre-Heating Regular Resin Composites and Flowable Composites on Luting Ceramic Veneers with Different Thicknesses
Resumo O objetivo neste estudo foi avaliar a influência do pré-aquecimento, conteúdo de carga e espessura da cerâmica na espessura da película, resistência de união ao microcisalhamento, grau de conversão e alteração de cor na cimentação de cerâmicas. Dois compósitos experimentais foram preparados (Bis-GMA / UDMA / BisEMA / TEGDMA), com diferen
Braz. Dent. J.. Publicado em: 07/10/2019
-
9. Chemical conversion of a solid body of the composite gypsum/polyhydroxybutyrate in hydroxyapatite/polyhydroxybutyrate
Resumo A transformação do gesso em hidroxiapatita permite agregar valor a essa matéria-prima, pois a cerâmica obtida possui alto valor comercial em relação ao gesso, enquanto o polímero acrescenta propriedades de biocompatibilidade e bioatividade ao biocompósito. Assim, compósitos de hidroxiapatita/poli-hidroxibutirato foram preparados a partir do g
Cerâmica. Publicado em: 15/08/2019
-
10. Fire exposure behavior of epoxy reinforced with jute fiber applied to ceramic tiles for a ventilated facade system
Civil construction seeks to increase the useful life of the facades of buildings. Installing a ventilated facade is one way to accomplish this due to aesthetic and technical advantages. Ceramic tiles are the main products used as the covering. To the back face of a tile, a bidirectional screen of glass fiber is adhered using epoxy resin. This set forms a com
Mat. Res.. Publicado em: 18/07/2019
-
11. Influence of Pre-Curing Different Adhesives on the Color Stability of Cemented Thin Ceramic Veneers
Resumo O objetivo deste estudo foi avaliar a estabilidade de cor de laminados cerâmicos de espessura fina em função do momento de ativação de diferentes sistemas adesivos na superfície interna das cerâmicas. Foram utilizados 5 sistemas adesivos (Scotchbond Multiuso, Single Bond Universal, Gluma 2 Bond, Ambar and Ambar APS) e o cimento resinoso fotoati
Braz. Dent. J.. Publicado em: 03/06/2019
-
12. Fatigue survival and damage modes of lithium disilicate and resin nanoceramic crowns
Abstract Polymer-based composite materials have been proposed as an alternative for single unit restorations, due to their resilient and shock absorbing behavior, in contrast to the brittleness of ceramic materials that could result in failure by fracture. Objective: To evaluate the fatigue strength and damage modes of monolithic posterior resin nanoceramic
J. Appl. Oral Sci.. Publicado em: 30/05/2019