Cement Mortar
Mostrando 37-48 de 104 artigos, teses e dissertações.
-
37. Compressive stress-strain behaviour of cement mortar-composites reinforced with short sisal fibre
To design building elements using sisal fibre reinforced mortar composites, the stress-strain curves of the composites both under tensile and compression load is needed. In this study short sisal fibre-cement based composites were developed and their stress-strain behaviour under compression characterized experimentally. The composites consisted of two morta
Mat. Res.. Publicado em: 05/11/2013
-
38. Steel corrosion assessment by electrochemical impedance on metakaolin blended mortars
Since Corrosion of reinforcing steel in concrete is the cause of major economic losses, Portland cement has been traditionally replaced by cements blended with pozzalanic materials, most of which have been found to reduce the corrosion of steel. This paper shows the results of an experimental research aimed to investigate the corrosion of reinforcement in mo
Mat. Res.. Publicado em: 05/11/2013
-
39. Study of mechanical properties and durability of magnesium phosphate cement matrix containing grinding dust
The acid-base cements are materials developed by means of reactions between an acid component and another basic one. This type cement belongs to the family of the so called "chemically bonded phosphate ceramics" (CBPCs), new types of inorganic materials that have special physico-chemical properties and that, in contrast to most advanced ceramics, are made by
Mat. Res.. Publicado em: 02/07/2013
-
40. Dry-grinded ultrafine cements hydration. physicochemical and microstructural characterization
The aim of the present research work was the evaluation of the physicochemical and microstructural properties of two ultrafine cements, produced by dry grinding of a commercial CEM I 42.5N cement. The effect of grinding on particle size distribution was determined by laser scattering analyzer. All cements were tested for initial and final setting times, cons
Mat. Res.. Publicado em: 01/02/2013
-
41. Influência do consumo de cimento e da relação água/cimento em argamassas para execução de estaca raiz / Influence of consumption of cement and of the water/cement ratio in mortars to produce root piles
Para a confecção de argamassa para o preenchimento da estaca raiz, a norma vigente, NBR 6122/2010 recomenda uma resistência mínima de 20 MPa, consumo mínimo de cimento de 600 kg/m³, e relação A/C entre 0,5 a 0,6, porém a determinação de consumo mínimo de cimento é um tema polêmico quanto à garantia de durabilidade, no entanto, nessas condiçõ
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 24/08/2012
-
42. Estudo do uso do agregado miÃdo reciclado de concreto na produÃÃo de argamassa para revestimento vertical / Study of the use of recycled aggregate concrete in the production of mortar for coating vertical
The utilization of fine recycled aggregate originated from concrete debris recycling presents economics advantages, once recycled fine aggregate has lower costs than natural fine aggregate. Besides, there is an environmental gain due to the replacement of natural fine aggregate by recycled aggregate resulting in a in a reduction of damage caused by irregular
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/11/2011
-
43. Concreto colorido: estudo da adição de pigmentos em concreto de cimento Portland de alto desempenho
Este trabalho busca analisar a influência do pigmento inorgânico de óxido de ferro na adição da argamassa e no concreto de cimento portland e quais as suas melhorias dentro desta incorporação. Cabe situar que nos últimos anos, o avanço nos tipos e classes de resistências do cimento tem possibilitado grandes melhorias nas propriedades físicas e qu�
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 31/08/2011
-
44. Cement - steatite composites reinforced with carbon fibres: an alternative for restoration of brazilian historical buildings
Steatite is a mineral which has been employed in the carving of elements in facades of Brazilian historical buildings and churches since the 17th century. Over the years, many of those historical buildings suffered the consequences of weathering with a current need for restoration. Recently a special cement-based mortar containing additions of fine powder wa
Materials Research. Publicado em: 25/02/2011
-
45. Influência da interação entre os parâmetros reológicos de argamassas e a área potencial de contato de substratos na aderência de argamassas de revestimento / Interaction between mortar rheological parameters and surface potential contact area on mortar renderings bond strength
and the shear bond strength of mortar rendering applied to concrete surfaces, this work intended to verify the influence of the interaction between surface potential contact area and mortar renderings¿ rheology on these performance properties. Moreover, this work has the objective to verify the influence of the mortar¿s rheology affected by the air-entrain
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
46. Estudo da influência de diferentes teores de Na2O em argamassas à base de escória de aciaria elétrica álcali-ativada / Study of the influence of Na2O different contents in mortar slag based of electric arc furnace alkali-activated
A indústria da construção civil é um dos maiores consumidores de recursos naturais no Mundo, além de ser responsável por grande parte da geração de CO2, visto que o material mais característico e utilizado do setor, o cimento Portland, contribui com mais de 5% do total das emissões de dióxido de carbono. Outro setor causador de impactos ambientais
Publicado em: 2011
-
47. Mortars Properties Obtained by Partial Replacement of Portland Cement by Ground Waste Calcined Clay Bricks / Propriedades de argamassas obtidas pela substituição parcial de cimento Portland por rejeitos particulados de tijolos
This work describes the results of an investigation on the possible applications of ground waste calcined clay bricks (WCB) for use as an active partial replacement for Portland cement in mortars. The investigation has been carried out using a full factorial design for experimental design. For the study, the physical and mechanical properties along their dur
Publicado em: 2010
-
48. Cimento de alvenaria:: uma abordagem sob a ótica da sustentabilidade
The civil construction industry consumes, around the world, a significant annual volume of cement to produce concrete and mortar. However, a great part of the cement consumption would not need, depending on the type of application, to be as strong and rich in tricalcium silicate (C3S), but is effectively enough if is rich in dicalcium silicate (C2S). Cements
Publicado em: 2010