Carbon Nitride
Mostrando 13-23 de 23 artigos, teses e dissertações.
-
13. Avaliação de catalisadores a base de carbeto e nitreto de molibdênio na obtenção de lactitol via hidrogenação da lactose / Avaliação de catalisadores a base de carbeto e nitreto de molibdênio na obtenção de lactitol via hidrogenação da lactose
Seeking a greater appreciation of cheese whey was developed to process the hydrogenation of lactose for the production of lactitol, a polyol with high added value, using the catalyst Ni / activated carbon (15% and 20% nickel), the nitride Mo2N, the bimetallic carbide Ni-Mo/ activated carbon and carbide Mo2C. After synthesis, the prepared catalysts were analy
Publicado em: 2010
-
14. Nitriding using cathodic cage technique of martensitic stainless steel AISI 420 with addition of CH4
AISI 420 martensitic stainless steel samples were nitrided by cathodic cage technique with addition of methane in the atmosphere aiming to reduce chromium nitride precipitation, to increase hardness and wear resistance without the presence of characteristic defects inherent to the ionic nitriding process. Microhardness measurements and X-ray analysis confirm
Matéria (Rio de Janeiro). Publicado em: 2008-06
-
15. Estudo de Impurezas de Carbono em Nanoestruturas de BN
In this work, we performed an analysis of the structural and electronic stability of nanostructures of Boron Nitride (BN), such as layers, tubes and cones, when doped with Carbon, through first-principles calculations as implemented in code SIESTA. We found that substitutional doping of Carbon for either a single Boron or a single Nitrogen atom produces sign
Publicado em: 2008
-
16. Nanoosciladores atomísticos de nanotubos de Carbono e de Nitreto de Boro / Atomistic nanooscillators of Carbon nanotubes and Boron Nitride
The Nanotechnology quickly advances to the development of new nanodevices. One of most important in the electronics is clocks that they synchronize the functioning of diverse devices in a determined circuit. In this work we study the development of nanooscillators based upon Carbon nanotubes and Boron-Nitride nanotubes. The atom that oscillates in the interi
Publicado em: 2007
-
17. Study on the deposition mechanism of thin carbon nitride films prepared with ion beam assisted deposition / Estudo do mecanismo de deposição de filmes finos de nitreto de carbono preparados com o sistema de deposição assistida por feixe de íons
Filmes finos de CNx foram depositados em temperatura ambiente, 350, 400, 500oC, por deposição a vapor de carbono sobre os substratos de Si(100) ou Si(111) com irradiação simultânea por íons derivado de gás N2 ou de mistura gasosa Ar-N2. A energia de íons variou de 150 a 600 eV e a razão de chegada, R(I/A), definida pela razão do fluxo de íons de n
Publicado em: 2007
-
18. Raman and infrared spectroscopy studies of carbon nitride films prepared on Si (100) substrates by ion beam assisted deposition
Filmes de nitreto de carbono, preparados por deposição assistida por feixe de íons, foram estudados pela espectroscopia de Raman e infravermelho, em função de energia de íons (200, 400, e 600 eV) e razão de chegada de íon a átomo R(I/A) de 0,9 a 2,5. A razão de composição N/C no filme, determinada por análise de detecção de recuo elástico, fo
Journal of the Brazilian Chemical Society. Publicado em: 2006-10
-
19. Mechanical and vibrational properties of carbon nitride alloys
A study of ultraviolet and visible Raman spectroscopy was made in amorphous carbon nitride (a-C:Nx) and amorphous hydrogenated carbon nitride (a-C:Nx:H) thin films. Two growth techniques were used: 1) glow discharge was used for depositing hydrogenated films with diamond-like (at -200V of bias) and graphite-like (-800V of bias) structure and 2) ion beam assi
Brazilian Journal of Physics. Publicado em: 2006-06
-
20. Estudo das propriedades termomecanicas e estruturais de filmes finos amorfos de carbono e nitretos de carbono / Study of the thermomechanical and structural properties in amorphous carbon and carbon nitride
In this work, we studied thenno mechanical and structural properties of hydrogenated amorphous carbon (a-C: H), hydrogenated carbon nitride (a-C:H:Nx) and carbon nitride (a-C:Nx) thin films. Two techniques were used to prepare the samples: glow discharge for depositing hydrogenated amorphous carbon (a-C:H) and carbon nitride (a-C:H:Nx) and ion beam assisting
Publicado em: 2004
-
21. SÍNTESE DE PÓS DE NITRETO DE GÁLIO POR REAÇÃO GÁS-SÓLIDO UTILIZANDO CARBONO COMO AGENTE REDUTOR / SYNTHESIS OF GALLIUM NITRIDE POWDER FROM GAS-SOLID REACTION USING CARBON AS REDUCING AGENT
O nitreto de gálio (GaN) é um dos mais interessantes e promissores materiais para aplicação em dispositivos óptico- eletrônicos. GaN pode ser usado para a fabricação de diodos e lasers azuis. O desenvolvimento deste tipo de material está relacionado com três campos principais: 1) deposição de camadas de GaN cristalino; 2) produção de nano- fila
Publicado em: 2002
-
22. Recent progress in the synthesis and characterization of amorphous and crystalline carbon nitride coatings
This review summarizes our most recent findings in the structure and properties of amorphous and crystalline carbon nitride coatings, synthesized by reactive magnetron sputtering. By careful control of the plasma conditions via proper choice of process parameters such as substrate bias, target power and gas pressure, one can precisely control film structure
Brazilian Journal of Physics. Publicado em: 2000
-
23. Caracteristicas da usinagem de um composito de resina fenolica reforçada com fibras de vidro e carbono
Some experiments were carried out to study the performance of many different tool materials, like pure ceramic (AI203+Zr02), mixed ceramic (A1203+TiC) , SIALON (A1203+SbN4) , whiskers reinforced ceramic (AI203+sic) , cemented carbide ISO K10, cubic boron nitride (CBN), o and diamond (PCD). They were tested in turning of carbon and glass fiber reinforced feno
Publicado em: 1992