Carbon Electrodes
Mostrando 1-12 de 147 artigos, teses e dissertações.
-
1. Enhanced Catalytic Performance of Strontium-Doped Lanthanum Manganites by the Presence of Molybdenum Oxides for Electro-Reduction of Hydrogen Peroxide
In this work, two catalysts, lanthanum manganite strontium-doped perovskite without (LSM) and with (LSMMO) mixed molybdenum oxides, were synthesized by the sol-gel route and deposited by immersion in carbon cloth substrates. Their performance as cathodes in the hydrogen peroxide reduction reaction (HPRR) and oxygen reduction reaction (ORR) was investigated t
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Additive Manufacturing towards the Fabrication of Greener Electrochemical Sensors for Antioxidants
Additive manufacturing is an emerging tool that has contributed to the sustainable fabrication of devices in several areas based on the concept of “zero waste”. Considering extrusion-based manufacturing (or 3D printing), polylactic acid (PLA) has been highlighted due to its biodegradability, obtention from renewable sources, and compatibility for 3D prin
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Drawing Electrochemical Sensors Using a 3D Printing Pen
This communication demonstrates that a 3D printing pen, commercially-available as a toy for kids, can be used to draw thermoplastic electrochemical sensors using conductive filaments over any desirable format and substrate. A polylactic acid filament containing graphene or carbon black was passed through the 3D pen that works as a handheld 3D printer (fused
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
4. Chemically-Activated Biochar from Ricinus communis L. Cake and Their Potential Applications for the Voltammetric Assessment of Some Relevant Environmental Pollutants
Biochar is a rich-carbon material highly functionalized, which allows the use as electrodes modifier for preconcentration and voltammetric determination of several species. This work describes a castor cake biochar production and chemical activation with different reaction conditions using HNO3 and/or H2O2. Biochar samples were characterized using scanning e
J. Braz. Chem. Soc.. Publicado em: 2020-05
-
5. Nanoparticles of Fe2O3 and Co3O4 as Efficient Electrocatalysts for Oxygen Reduction Reaction in Acid Medium
This paper presents a comparative study about the oxygen reduction reaction (ORR) catalyzed by nanoparticles of Fe2O3 and Co3O4 applied on the surface of glassy carbon electrodes (GCE). The nanoparticles were synthesized using the modified polymeric precursor method (Pechini). These two nanomaterials were characterized by Fourier transform infrared spectrosc
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
7. Uncured Polydimethylsiloxane as Binder Agent for Carbon Paste Electrodes: Application to the Quantification of Propranolol
This study describes the use of uncured polydimethylsiloxane (PDMS) as a binder agent to prepare carbon paste electrodes (CPEs). A comparative study between the properties of CPEs prepared with PDMS and mineral oil Nujol®, the most common binder agent for CPEs, was carried out. Cyclic voltammetry, electrochemical impedance spectroscopy, and chronoamperometr
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
8. Square-Wave Voltammetry Determination of Ciprofloxacin in Pharmaceutical Formulations and Milk Using a Reduced Graphene Oxide Sensor
In this paper, a simple, sensitive and precise electroanalytical method was developed using a chemically-reduced graphene-oxide (CRGO)-modified glassy carbon electrode and square wave voltammetry (SWV) for determination of ciprofloxacin in pharmaceutical formulations (tablets) and milk samples. Advantages of this sensor include a potential displacement of 10
J. Braz. Chem. Soc.. Publicado em: 16/09/2019
-
9. Study on mechanical & thermal properties of PCL blended graphene biocomposites
Abstract Graphene is a new carbon based nonmaterial that attracts the technology and constitutes one of the great promises for nanotechnology applications in a near feature. It’s having versatile intrinsic mechanical, thermal and electrical properties.By Incorporation of small amount of graphene fillers into polymer matrix can create attractive bio composi
Polímeros. Publicado em: 04/07/2019
-
10. Semiconductor Nanocrystals-Reduced Graphene Composites for the Electrochemical Detection of Carbendazim
A new nanocomposite based on ZnCdTe semiconductor nanocrystals (NCs) synthesized in situ on reduced graphene oxide (rGO) was obtained. The heterostructure was characterized using UV-Vis emission and absorption spectroscopies, which provided evidences of the growth of the nanocrystals onto the rGO matrix. To evaluate the electrochemical performance, carbon pa
J. Braz. Chem. Soc.. Publicado em: 23/05/2019
-
11. Synthesis of Hydrotalcite-Supported CdTe Semiconductor Nanocrystals for Electrochemical Detection of Ciprofloxacin
In this work, CdTe quantum dots (QDs) were controllably grown onto the surface of layered double hydroxide (LDH) aiming to develop a sensitive and selective method for the electrochemical detection of ciprofloxacin (CPX). Emission and absorption spectroscopy results as well as high-resolution transmission electron microscopy (HRTEM) images evidenced the form
J. Braz. Chem. Soc.. Publicado em: 23/05/2019
-
12. Mejora de la resistencia al desgaste abrasivo de un revestimiento Fe-Cr-Mn-C mediante la adición de V
ABSTRACT The aim of this work is to increase the abrasive wear resistance of a coating, applied on plates of AISI 1020 carbon steel, using tubular coated electrodes with the Fe-Cr-Mn-C alloy system. In order to achieve this increase, V was added to the alloy system. The resulting coating were studied using optical microscopy (MO), X-ray diffraction and micro
Matéria (Rio J.). Publicado em: 20/05/2019