Carbon Ceramic
Mostrando 13-24 de 36 artigos, teses e dissertações.
-
13. Sintese de nanotubos de carbono por CVD utilizando catalisadores à base de ferro e molibdênio suportados em matrizes cerâmicas
Molybdenum is known for its synergistic effect in the synthesis of carbon nanotubes (CNs) by chemical vapor deposition (CVD method). When added to typical catalysts like iron, nickel, and cobalt, even in small quantities, it is increases the yield of these nanostructures. The presence of Mo also has an influence on the type and number of CN walls formed. Alt
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/02/2010
-
14. Modeling elastic and thermal properties of 2.5D carbon fiber and carbon/SiC hybrid matrix composites by homogenization method
Abstract: Advanced carbon fiber hybrid carbon-ceramic matrix composites are realizing their potential in many thermostructural components for aerospace vehicles. This work presents ab-initio predictions of elastic constants and thermal properties for 2.5D carbon fiber reinforced carbon-silicon carbide hybrid matrix composites, by using the homogenization tec
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
15. Synthesis of a boron modified phenolic resin
Abstract: Phenolic resin has long been used as matrix for composites mainly because of its flame retardant behavior and high char yield after pyrolysis, which results in a self supporting structure. The addition of ceramic powders, such as SiC and B4C, as fillers to the phenolic resin, results in better thermo-oxidative stability, but as drawbacks, it has po
J. Aerosp. Technol. Manag.. Publicado em: 2010-08
-
16. Otimizaçâo das condições de preparação de eletrodos à base de carbono cerâmico utilizando-se planejamento fatorial
Different parameters of carbon ceramic electrodes (CCE) preparation, such as type of precursor, carbon material, catalyst amount, among others, significantly influence the morphological properties and consequently their electrochemical responses. This paper describes a 2³ factorial design (2 factors and 3 levels with central point replicates), which the fac
Química Nova. Publicado em: 2010
-
17. Preparação, caracterização e estudos eletroquimicos de eletrodos a base de carbono cerâmico aplicados na determinação de dopamina
O estudo de eletrodos a base de carbono cerâmico (ECC), tem aumentado significativamente devido às vantagens sobre os demais eletrodos. Os ECC apresentam grande área superficial, alta condutividade elétrica, além de uma maior resistência mecânica, o que aumenta a estabilidade e durabilidade desses eletrodos. Os diferentes parâmetros utilizados na pre
Publicado em: 2010
-
18. Bacterial diversity of the 16S rRNA gene in pyrogenic black carbon of Anthropogenic Dark Earth from the Central and Oriental Amazon / Diversidade bacteriana do gene 16S rRNA em carvão pirogênico de Terra Preta Antropogênica da Amazônia Central e Oriental
Anthropogenic Dark Earth (ADE) has this denomination because it is found at archeological sites, where prehistoric groups lived, and it is considered one of the most fertile soils of the world. In this soil a great amount of material left by indigenous groups was found as ceramic fragments, lithic workmanships, and especially pyrogenic black carbon. Studies
Publicado em: 2009
-
19. PRODUÇÃO DE PIGMENTOS INORGÂNICOS A BASE DE ZrSiO4 COM INCORPORAÇÃO DE PASTA ELETROLÍTICA DE PILHAS / PREPARATION OF INORGANIC PIGMENTS BASED ON THE ZrSiO4 OXIDE FROM A MIXTURE OF AN ELECTROLYTIC-PASTE WASTE OF ALKALINE BATTERIES AND ZrSiO4
Throughout the times, new pigment systems have been gradually developed. In the nowadays, the development of ceramic pigments represents a part of the Materials Science, where there is a lack of concepts, roles and strategies, which in goal allows the developing of new rotes of preparing or pigments, in both scientific and technological areas. This work deal
Publicado em: 2009
-
20. Material carbono ceramico condutor SiO2/ZrO2/C-grafite : sintese, caracterização e aplicações / SiO2/ZrO2/C-graphite conducting carbon ceramic material : synthesi characterization and application
SiO2/ZrO2/C-graphite was prepared by the sol-gel method in two compositions: (A) SZC30 (SiO2 = 50 %, ZrO2 = 20 %, C = 30 %) e (B) SZC20 (SiO2 = 60 %, ZrO2 = 20 %, C = 20 %) in % m/m, characterized and used to prepare electrodes. The carbon ceramic material was thermally treated at 400, 600, 800 and 1000 °C in nitrogen atmosphere, and it was observed that it
Publicado em: 2008
-
21. Estudos em materiais vitreos e/ou ceramicos de SiCxOy e/ou SiC enriquecidos com fase dispersa de carbono / Studies in vitreous and/or ceramic materials based on SiCxOy and/or SiC enriched with dispersed carbon
In this study, vitreous and/or ceramic materials based on SiCxOy and/or SiC enriched with carbon were obtained by pyrolysis of hybrid polymeric precursors, in the presence or not of nickel acetate (NiAc). The polymeric precursors with and without NiAc were prepared by hydrosilylation reaction between poly(methylsiloxane) (PMS) and divinylbenzene (DVB), in di
Publicado em: 2008
-
22. Estudo de conformação de cerâmicas à base de zircônia para aplicação em células a combustível do tipo óxido sólido / STUDY OF TAPE CASTING OF YTTRIA STABILIZED ZIRCONIA FOR APPLY IN SOLID OXIDE FUEL CELL
The hydrogen economy has been risen as new option for supply the growing global demand for energy. A fuel cell is an electrochemical device able to use hydrogen as a energy source. Carbon dioxide (CO2) emission is very low so it is ecologically friendly, once energy is produced by a reaction of hydrogen and oxygen. The production of energy from hydrogen fuel
Publicado em: 2008
-
23. SiO2/TiO2/graphite prepared by sol-gel method : a new electrically conducting carbon ceramic material / SiO2/TiO2/grafite preparado pelo metodo sol-gel : um novo material carbono ceramico eletricamente condutor
Este trabalho reporta a preparação, caracterização e aplicação de um novo material carbono cerâmico eletricamente condutor, SiO2/TiO2/Grafite. O método sol-gel foi empregado como procedimento de síntese e permitiu a inclusão de carbono grafite por toda a estrutura porosa do óxido misto SiO2/TiO2. Análises de microscopia eletrônica de varredura (
Publicado em: 2008
-
24. NEW ALTERNATIVE FOR REUSE HAZARDOUS WASTE FROM THE PRIMARY ALUMINUM PRODUCTION PROCESS (SPL): PRODUCTION OF THE OPAL GLASS AND FRITS / Nova alternativa para reaproveitamento do resíduo perigoso gerado na produção de alumínio primário (SPL): obtenção de vidros opacos e fritas.
The solid waste from deteriorated linings of cells in the aluminum metal production is called spent pot lining or SPL. Because of the presence of leachable cyanide and fluoride compounds the SPL is classified by internationals standards and the Brazilian Association of Technical Standard (ABNT) as hazardous waste. The purpose of the present work is to evalua
Publicado em: 2008