Bulk Deposition
Mostrando 1-12 de 41 artigos, teses e dissertações.
-
1. Relief Position and Soil Properties under Continuous Banana Cropping in Subhumid Climate in Northeast Brazil
ABSTRACT Sequences of thick and eroded soils in hills surfaces are cultivated with banana since the beginning of the last century in the Northeast of Pernambuco (PE), Brazil. Measurements of soil properties depending on soil slope under intensive agricultural cultivation are limited mostly as the pedogenetic approach. This study aimed to identify the dominan
Rev. Bras. Ciênc. Solo. Publicado em: 09/09/2019
-
2. MAGNETOMETRIA IN-SITU PARA CARACTERIZAÇÃO DE MATERIAIS ELETRODEPOSITADOS
We have recently made studies of electrodeposits of Co onto graphene attached to different substrates, successfully performed via in-situ magnetization measurements. The magnetic analysis of deposits as a function of time lapse, indicate that Co grows with different magnetic characteristics from the beginning to the end of each run, independent of the substr
Quím. Nova. Publicado em: 18/07/2019
-
3. Blast Furnace Hearth Lining: Post Mortem Analysis
The main refractory lining of blast furnace hearth is composed by carbon blocks that operates in continuous contact with hot gases, liquid slag and hot metal, in temperatures above 1550 ºC for 24 hours a day. To fully understand the wear mechanism that acts in this refractory layer system it was performed a Post Mortem study during the last partial repair o
Mat. Res.. Publicado em: 15/05/2017
-
4. Structural Characterization of ZnTe Grown by Atomic-Layer-Deposition Regime on GaAs and GaSb (100) Oriented Substrates
This work presents the characterization of ZnTe nanolayers grown on GaAs and GaSb (100) substrates by the Atomic Layer Deposition (ALD) regime. Under certain conditions, the alternating exposition of a substrate surface to the element vapours makes possible the growth of atomic layers in a reactor where the atmosphere is high-purity hydrogen. ZnTe was grown
Mat. Res.. Publicado em: 23/03/2017
-
5. Deposition of Carbon Nanotube Films on Polyamide and Polypropylene Substrates: A Computer Simulation Approach
In this work we study hydroxylated carbon nanotube (CNT) assembly on polyamide (PA) and polypropylene (PP) polymers activated by UV radiation from a theoretical and experimental perspective. Molecular computer simulation was done to understand the stable conformations and bulk properties (molecular dynamics) of the polymers before and after exposure to UV ra
Mat. Res.. Publicado em: 14/07/2016
-
6. Bulk Atmospheric Deposition of Major Ions and Dissolved Organic Nitrogen in the Lower Course of a Tropical River Basin, Southern Bahia, Brazil
Major ionic constituents (Cl–, Na+, K+, Mg2+, Ca2+, NH4+, NO3–, SO42–) and dissolved organic nitrogen were determined, from September 2009 to January 2010, in bulk atmospheric deposition in the lower course of Cachoeira River, sou
J. Braz. Chem. Soc.. Publicado em: 2015-08
-
7. Electrophoretic deposition of BaTi0.85Zr0.15O3 nanopowders
The present study reports the results of thick films (20-130 µm) produced through electrophoretic deposition of BaTi0.85Zr0.15O3 (BTZ) nanometric powders synthesized by the Pechini's method. The BTZ powderscalcined at 600°C/2h presented a single crystalline phase with an average particle size of ~20nm. To thick films deposition, a stable suspension of acet
Mat. Res.. Publicado em: 29/07/2013
-
8. Otimização e comparação de processos para formação do campo retrodifusor com boro em células solares
The aim of this thesis was to develop and compare methods for the formation of the back surface field and emitter with boron using n-type and p-type solar-grade Si-Cz wafers as well as analyze and optimize a manufacturing process of solar cells with structure n+pp+ and back surface field formed by boron. The highly doped p+ region was formed by spin-on depos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/03/2012
-
9. Nanoparticles from Cu-Zn-Al shape memory alloys physically synthesized by ion milling deposition
In this research, an ion milling equipment was used to elaborate nanoparticles from Cu-Zn-Al alloys with shape memory effect. Two different compositions were used, target A: 75.22Cu-17.12Zn-7.66Al at % with an Ms of -9 °C and target B: 76.18Cu-15.84Zn-7.98Al with an Ms of 20 °C. Nanoparticles were characterized by High Resolution Transmission Electron Micr
Materials Research. Publicado em: 05/04/2012
-
10. Avaliação da biocompatibilidade de vidro e vitrocerâmica do sistema SNCP (SiO2-Na2O-CaO-P2O5)
This article reports research results related to bioactivity and cytotoxicity tests using neutral red uptake method for glass powders and bulk glass ceramics belonging to the SNCP (SiO2-Na2O-CaO-P2O5) system. The obtained materials showed bioactivity when immersed in SBF promoting the surface deposition of HAp. When analyzed as powders, cytotoxicity was evid
Química Nova. Publicado em: 2012
-
11. CICLAGEM DE NUTRIENTES EM Eucalyptus dunnii ESTABELECIDO NO BIOMA PAMPA / NUTRIENTS CYCLING IN Eucalyptus dunnii PLANTED IN PAMPA BIOME
O objetivo deste trabalho foi avaliar aspectos da ciclagem de nutrientes em Eucalyptus dunnii através do monitoramento de um povoamento durante o período de um ano, começando quando as árvores estavam com 16,5 meses de idade, no município de Alegrete, Rio Grande do Sul, em área pertencente à empresa Stora Enso S/A,. Foi avaliada, mensalmente, a deposi
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 15/07/2011
-
12. Improved Ge surface passivation with ultrathin SiO/sub x/ enabling high-mobility surface channel pMOSFETs featuring a HfSiO/WN gate stack
To realize high-mobility surface channel pMOSFETs on Ge, a 1.6-nm-thick SiOX passivation layer between the bulk Ge substrate and HfSiO gate dielectric was introduced. This approach provides a simple alternative to epitaxial Si deposition followed by selective oxidation and leads to one of the highest peak hole mobilities reported for unstrained surface chann
Publicado em: 2011