Blends
Mostrando 25-36 de 533 artigos, teses e dissertações.
-
25. Influence of the addition of KCl and CaCl2 blends on the physicochemical parameters of salted meat products throughout the processing steps
Abstract The objective of this study was to evaluate the effects of different chloride salts (NaCl, KCl, and CaCl2) on the characteristics of salted meat products through the determination of moisture, pH, aw, chloride, ash levels, cooking loss, and instrumental color during the processing steps. Four salted meat treatments were elaborate using the following
Food Sci. Technol. Publicado em: 25/11/2019
-
26. Bionanocomposites of PLA/PBAT/organophilic clay: preparation and characterization
Abstract The objective of this study was to develop bionanocomposites from blends of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and from 3% and 6% bentonite clay. Initially, the bentonite clay was treated with Praepagen salt, and the properties of the modified clay were evaluated. After the organophilization of the clay was co
Polímeros. Publicado em: 04/11/2019
-
27. Effects of Gamma Radiation on the Properties of the Thermoplastic Starch/Poly (Butylene Adipate-co-Terephthalate) Blends
The development of blends made from matrices of synthetic biodegradable polymers, and natural additives, are considered less environmentally aggressive materials. This work aimed to study the effects of gamma radiation on the properties of the thermoplastic starch (TPS)/poly(butylene adipate-co-terephthalate) (PBAT). In this work, blends of TPS/PBAT were pre
Mat. Res.. Publicado em: 14/10/2019
-
28. Composition and mineralization of organic compost derived from composting of fruit and vegetable waste
ABSTRACT Fruit and vegetable waste can be used for the production of organic compost, which when mineralized can increase the availability of nitrogen. The objectives of this study were: (a) to produce compost from different ratios of fruit and vegetable waste, rice husk and poultry manure that meets the legislation on organic fertilizers and (b) to assess t
Rev. Ceres. Publicado em: 03/10/2019
-
29. Cheese whey exploitation in Brazil: a questionnaire survey
Abstract This study aimed to carry out a diagnosis of the cheese whey exploitation by the Brazilian dairy industry using a questionnaire survey. The dairy industries (n=100) were mainly from Southeast (55%) and South (25%) regions and supervised by the Federal Inspection System (80%). Most of them produced (67%) and processed (60%) sweet cheese whey, using i
Food Sci. Technol. Publicado em: 23/09/2019
-
30. Avaliação do efeito do agente compatibilizante (PP-g-MA) em misturas PP/Amido termoplástico
RESUMO O crescente desperdício de materiais plásticos no meio ambiente juntamente com a preocupação com a futura escassez do petróleo tem aumentado o interesse por polímeros biodegradáveis, como o amido. Nos últimos anos, o amido tem sido utilizado em misturas com diferentes polímeros sintéticos. Essas misturas têm sido compatibilizadas por meio d
Matéria (Rio J.). Publicado em: 16/09/2019
-
31. Influência do envelhecimento termo-oxidativo nas propriedades mecânicas e de amarelamento de blendas de poliestireno com borracha reciclada de estireno-butadieno (SBR)
RESUMO Este trabalho teve como objetivo avaliar o envelhecimento termo-oxidativo, nas propriedades mecânicas e de índice de amarelamento (YI), de blendas de poliestireno com borracha reciclada (SBRr), compatibilizadas. As blendas foram preparadas, inicialmente, em uma extrusora de rosca dupla corrotacional e, posteriormente, os grânulos extrudados foram m
Matéria (Rio J.). Publicado em: 16/09/2019
-
32. Sustainable blends of LDPE/NR and sugarcane bagasse ashes with PE-g-MA thermomechanical relationships
RESUMO As blendas poliméricas obtidas com resíduos que antes eram chamados de lixos vêm crescendo como uma solução viável, permitindo melhorias nas propriedades mecânicas e como alternativas sustentáveis. Este trabalho relata os efeitos de misturas de polietileno de baixa densidade (PEBD) e borracha natural(NR), com cinzas de bagaço de cana-de-açú
Matéria (Rio J.). Publicado em: 16/09/2019
-
33. Obtenção de scaffolds bioabsorvíveis a partir de blenda de PLGA e IR com adição de hidroxiapatita
RESUMO A obtenção de scaffolds bioativos a partir da blenda polimérica de poli (ácido láctico-co-glicólico) (PLGA) e poliisopreno (IR) com diferentes adições de Hidroxiapatita (HAp) é proposta como uma alternativa à engenharia de tecidos. Para o preparo das soluções poliméricas, a blenda de PLGA/IR e a HAp foram dissolvidas em clorofórmio. Post
Matéria (Rio J.). Publicado em: 16/09/2019
-
34. Efeitos da variação da concentração de solução polimérica aquosa a base de PVP na têmpera de aço AISI 4140
RESUMO A têmpera é um tratamento térmico que tem como principal objetivo a elevação de dureza e resistência mecânica dos aços por meio da sua transformação microestrutural. O processo se baseia na elevação da temperatura do material até a austenitização, seguida do arrefecimento por meio da imersão em um fluido, a qual precisa ser rápida o s
Matéria (Rio J.). Publicado em: 16/09/2019
-
35. A mixed model applied to joint analysis in experiments with coffee blends using the least squares method
RESUMO O presente estudo tem por objetivo propor um modelo misto em uma análise sensorial de quatro experimentos de blendscom diferentes padrões de qualidade envolvendo as espécies Coffea Arabica L. e Coffea Canephora. Cada experimento foi diferenciado em função das proporções utilizadas na formulação dos blendse das concentrações utilizadas no pr
Rev. Ciênc. Agron.. Publicado em: 04/07/2019
-
36. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019