Atomic Force Microscopy
Mostrando 13-24 de 559 artigos, teses e dissertações.
-
13. Influence of doping with Sm3+ on photocatalytic reuse of ZnO thin films obtained by spin coating
ABSTRACT The difficulty in the powder reuse favors the study of materials in the form of thin films. ZnO based films have high photocatalytic potential. In this work, ZnO:xSm3+ (x = 0, 1, 2 and 4 %mol) thin films were prepared by spin coating method. The resins obtained to manufacture the thin films were prepared by complex polymerization method. The samples
Matéria (Rio J.). Publicado em: 25/11/2019
-
14. Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin
Abstract The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were
Braz. oral res.. Publicado em: 28/10/2019
-
15. Electrospinning synthesis and assessment of physicochemical properties and biocompatibility of cobalt nitrate fibers for wound healing applications
Abstract: The aim of this study was to develop polyurethane (PU) wound dressing incorporated with cobalt nitrate using electrospinning technique. The morphology analysis revealed that the developed composites exhibited reduced fiber and pore diameter than the pristine PU. The electrospun membranes exhibited average porosity in the range of 67% - 71%. Energy-
An. Acad. Bras. Ciênc.. Publicado em: 29/07/2019
-
16. Blood compatibility assessments of electrospun polyurethane nanocomposites blended with megni oil for tissue engineering applications
Abstract: Tissue engineering holds as a prominent technique to repair or replace the damaged human parts to recreate its native function. In this research, a novel scaffold based on polyurethane (PU) comprising megni oil was electrospun for tissue engineering applications. The obtained polyurethane blended with megni oil nanofibers were characterized by scan
An. Acad. Bras. Ciênc.. Publicado em: 19/06/2019
-
17. Corrosion and Micro-abrasive Wear Behaviour of 2524-T3 Aluminium Alloy with PAni-NPs/PSS LbL Coating
In this paper, we present an alternative method to obtain thin films for coating protection on the surface of the AA2524-T3 Al-alloy by using the Layer-by-Layer (LbL) technique. The LbL films were fabricated by alternated immersion of the Al-alloy into a poly(styrene sulfonate) (PSS) and polyaniline nanoparticles (PAni-NPs) solutions, obtaining a PAni-NPs/PS
Mat. Res.. Publicado em: 06/06/2019
-
18. Using prodigiosin against some gram-positive and gram-negative bacteria and Trypanosoma cruzi
Abstract Background: This work aimed to explore the action of natural prodigiosin on both bacterial organisms and Trypanosoma cruzi cells. Methods: Natural prodigiosin pigment was extracted and purified from cultures of Serratia marcescens. Two media, peanut broth and peptone glycerol broth, both recommended in the literature for prodigiosin production, we
J. Venom. Anim. Toxins incl. Trop. Dis. Publicado em: 03/06/2019
-
19. Development and Characterization of PbI2 Nanoparticles for all Solid-State Flexible Supercapacitor Purposes
The development and utilization of new energy sources has been extensively studied in the world. Here, we report the development of flexible self-supported metal-free electrodes based on non-oxidized graphene multilayer (MLG) paper containing the lead iodide nanoparticles (PbI2-NPs). The PbI2-NPs was obtained and characterized by X-ray diffraction (XDR) and
Mat. Res.. Publicado em: 20/05/2019
-
20. Surface morphologic evaluation of orthodontic bonding systems under conditions of cariogenic challenge
Abstract: Orthodontic bonding systems are submitted to demineralization and remineralization dynamics that might compromise their surface smoothness, and favor biofilm aggregation and caries development. The aim of the present study was to evaluate the effects of a cariogenic challenge model (in vitro pH-cycling model) on the surface roughness and topography
Braz. oral res.. Publicado em: 25/04/2019
-
21. Surface Topography, Gloss and Flexural Strength of Pressable Ceramic After Finishing-Polishing Protocols
Resumo O objetivo deste estudo foi avaliar o efeito de diferentes protocolos de acabamento e polimento na rugosidade da superfície, brilho, resistência à flexão biaxial e morfologia de cerâmica prensada. Trinta discos de cerâmica (12x1 mm) foram produzidos e divididos em cinco grupos (n=6): CT- controle (glaze); DA- ponta diamantada de granulação fin
Braz. Dent. J.. Publicado em: 04/04/2019
-
22. Inhibitory effect of reduced graphene oxide-silver nanocomposite on progression of artificial enamel caries
Abstract The use of antimicrobial agents is an efficient method to prevent dental caries. Also, nanometric antibacterial agents with wide antibacterial spectrum and strong antibacterial effects can be applied for prevention of dental caries. Objectives: The aim of this study was to evaluate the inhibitory effect of reduced graphene oxide-silver nanoparticle
J. Appl. Oral Sci.. Publicado em: 10/12/2018
-
23. Enhancement of Pitting Corrosion Resistance of Austenitic Stainless Steel Through Deposition of Amorphous/Nanocrystalline Oxy-nitrided Phases by Active Screen Plasma Treatment
In this research, AISI 304 austenitic stainless steels were efficient treatment using active screen plasma oxy-nitriding technique. The modified layers were characterized by X-ray photoelectron spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopes, and atomic force microscopy. In addition, the pitting corrosion resi
Mat. Res.. Publicado em: 29/10/2018
-
24. Study of the Corrosive Behavior of the AISI 1020 Steel in Acid Crude Oil by Microscopic Techniques (LM, AFM and SEM/EDX) and Raman Spectroscopy
Microscopic techniques were combined to study the influence of corrosion rate on the morphologic behavior of AISI 1020 steel specimens submitted to thermal degradation of a typical acid crude oil (total acid number (TAN) = 2.1390 mg KOH g-1 and total sulfur (S) = 0.7778 wt.%). The techniques used were light microscopy (LM), scanning electron microscopy/energ
J. Braz. Chem. Soc.. Publicado em: 2018-08