Técnica experimental para quantificar a eficiência de distribuidores de líquidos industriais do tipo tubos perfurados paralelos. / Liquid aspersion effuciency quantification experiment: application in ladder type distributors.

AUTOR(ES)
DATA DE PUBLICAÇÃO

2008

RESUMO

The current text describes a simple experimental method in order to compare the efficiency of the liquid distributors applied at the ore treatment industries in washers, classifiers and mills as well as at the chemical processing industries. The technique basically consist of analyzing the dispersion through the standard deviation of the liquid mass which was collected in vertical pipes placed in a square way under the distributor. As an example of us usage, it has been applied a pilot scale for collecting the liquid mass, installed at the Santa Cecília Universitys Chemical Engineering Laboratory in Santos, with a setting of 21 vertical tubes measuring 52 mm in internal diameter and 800 mm in length. A 50 mm thick acrylic blanket was fixed between the distributor and the pipe setting in order to avoid splashes. Some experiments have been made with a ladder-tipe distributors containing 4 parallel tubes each, for a pilot column of 400 mm in diameter. The literature shows disagreement regarding the characteristics of the project and the efficiency of the distributors. The number of holes has varied (n) 95, 127 and 159 holes/m2; 12, 16 and 20 holes for distributor, the diameter of the holes (d) 2, 3 and 4 mm and the flow of entrance in the distributors (q) of 1,2; 1,4 and 1,6 m3/h. The best efficiency of splashing of the lowest deviation pattern (0,302) was achieved with n of 159 holes/m2, d of 2 mm and q of 1,4 m3/h showing the limitation of characteristics of the project literature. The pressure (p), for this condition in the distributor entrance, was only 0,51 kgf/cm2. The measuring relation between the area of the section of the feeding pipe and the addition of the area of the roles was 5,81, the total volume of the out flow for unit of the area of the column section for this better condition was 11,32 m3/(h m2) and the average speed (v), in each hole was 6,31 m/s. Finally, the indicated method permits the comparison and quantification of the efficiency of the distributors, besides showing that some of the project concepts are not valid and the literature does not recommend them.

ASSUNTO(S)

log washer washer distributor fisch spine gas washer equipamentos de mineração (otimização) wet scrubber liquid distributor ore classifiers qualidade do processo ladder pipe distributors processamento mineral ore washer liquid aspersion device wet mills rejeitos de mineração (controle; mitigação) dust dry cleaner

ACESSO AO ARTIGO

Documentos Relacionados