Pré-tratamento físico-químico e enzimático para efluente de abatedouro

AUTOR(ES)
FONTE

Eng. Sanit. Ambient.

DATA DE PUBLICAÇÃO

25/11/2019

RESUMO

RESUMO O efluente gerado em um abatedouro de aves, contendo gordura (quantificada pela análise de Óleos e Graxas - O&G) na concentração de 1.100 mg.L-1, foi submetido a dois pré-tratamentos para redução da concentração de material orgânico particulado: um tratamento físico-químico convencional (coagulação/floculação com cloreto férrico) ou um tratamento enzimático alternativo (hidrólise enzimática), aplicados isoladamente antes do processo biológico para remoção de material orgânico dissolvido. A hidrólise foi realizada com 0,5% (m/v) de um preparado enzimático sólido (PES - contendo oito unidades de atividade lipásica por grama) produzido pelo fungo Penicillium sp. por 8 h a 30ºC. Diferentes condições foram avaliadas na coagulação/floculação, sendo selecionada a que apresentou melhor remoção de demanda química de oxigênio (DQO) total para alimentação de biorreatores aeróbios e anaeróbios de bancada: pH = 5,0 e 400 mg de FeCl3.6H2O.L-1. Melhores resultados foram alcançados ao se utilizar o pré-tratamento físico-químico, com remoções médias de DQO de 91% nos tratamentos aeróbio e anaeróbio.ABSTRACT The effluent generated in a poultry slaughterhouse, containing fat (quantified by oil and grease - O&G analysis) at a concentration of 1,100 mg.L-1, was subjected to two pre-treatments to reduce the particulate organic matter concentration: a conventional physicochemical treatment (coagulation/flocculation with ferric chloride) or an alternative enzymatic treatment (enzymatic hydrolysis), applied alone prior to the biological process for removing dissolved organic material. Hydrolysis was performed with 0.5% (m/v) of a solid enzymatic preparation (SEP - containing 8 lipase activity units per gram) produced by the fungus Penicillium sp. for 8 h at 30ºC. Different conditions were evaluated in the coagulation/flocculation, and the one with the best total COD removal for feeding bench top aerobic and anaerobic bioreactors was selected: pH = 5.0 and 400 mg FeCl3.6H2O.L-1. Better results were achieved when using the physicochemical pre-treatment with average COD removals of 91% in aerobic and anaerobic treatments.

Documentos Relacionados