Particleboard Panels Produced with Different Radial Positions of Pinus oocarpa Wood
AUTOR(ES)
Mendes, Rafael Farinassi, Baleeiro, Naiara Sena, Mendes, Lourival Marin, Scatolino, Mário Vanoli, Oliveira, Stefânia Lima, Protásio, Thiago de Paula
FONTE
Floresta Ambient.
DATA DE PUBLICAÇÃO
01/02/2018
RESUMO
ABSTRACT The aim of this study was to evaluate the effect of different radial regions of Pinus oocarpa wood on the physical and mechanical properties of particleboard panels. Three different radial regions (internal, intermediate and external) and the mixture (integral log) were assessed. Experimental panels were produced with a nominal density of 0.70 g/cm3 using 8% urea-formaldehyde adhesive; they were compressed at a specific pressure of 40 kgf/cm2 and temperature of 160 °C, for 8 minutes. Wood radial position affected particleboard quality and a direct influence of the chemical composition and density of the material used was observed. Only the panels produced the mixture (integral log) and with the internal region met all the requirements stipulated by the marketing standard.
Documentos Relacionados
- Erratum: Particleboard Panels Produced with Different Radial Positions of Pinus oocarpa Wood
- Physical-mechanical Properties of Plywood Produced With Acrocarpus fraxinifolius and Pinus oocarpa
- BRIQUETTES QUALITY PRODUCED WITH THE MACAUBA EPICARP (Acrocomia aculeata) AND Pinus sp. WOOD
- PROPERTIES OF PARTICLEBOARD PANELS MADE OF SUGARCANE PARTICLES WITH AND WITHOUT HEAT TREATMENT
- Strength and Stiffness of Cross Laminated Timber (CLT) panels produced with Pinus and Eucalyptus: experimental and analytical comparisons