Modelagem da estampagem profunda de chapas metálicas via o método dos elementos finitos associado ao critério de escoamento não-quadrático de Hill / Modelling of sheet metal deep drawing via finite element method associated with Hills non-quadratic yield criterion
AUTOR(ES)
Daniel Akira Maêda
DATA DE PUBLICAÇÃO
2009
RESUMO
The sheet metal forming processes are widely used in the manufacturing of products in several areas, from aviation to household utensils, due to its high productivity, reliability and low cost of production. To achieve these qualities, the design of a product made by sheet metal forming should take into consideration the metallurgical factors of the blank to be used. The blank is usually cold-rolled, which leads to different mechanical properties in the rolled and transverse directions. To take into account this anisotropy, several yield criteria were proposed. To check the influence of the yield criterion in the strain distribution of the final product, this study focused on the implementation of the yield criteria of Hill (1979) and Barlat et al. (1993) in an academic computer program that modeled the sheet metal forming process by the finite element method. The Hill (1979) criterion was implemented and had good results, in accordance with the literature. The Barlat et al. (1993) criterion was formulated for a finite element method analysis, though not implemented. By using Hills non-quadratic yield criterion it was possible to analyze the strain distribution for various yield surfaces, changing only the value of one parameter of the yield function.
ASSUNTO(S)
estampagem profunda conformação de chapas metálicas sheet metal forming método dos elementos finitos finite element method non-quadratic yield criterion deep-drawing critério de escoamento não-quadrático
Documentos Relacionados
- Forming limit diagrams applied to finite element analysis of deep drawing of sheet metals
- A hybrid approach for estimating the drawbead restraining force in sheet metal forming
- Estudo analítico-numérico de freios de estampagem em chapas metálicas
- Análise da instabilidade plástica em chapas metálicas anisotrópicas, utilizando novo critério de escoamento
- Influence of the lubricant use in the process of deep drawing with thick steel sheeet metals