Improvement of the productivity in getting holes in aviation aluminum alloys with high speed tools / Melhoria da produtividade na obtenção de furos em liga de aluminio aeronautico com ferramentas de aço rapido

AUTOR(ES)
DATA DE PUBLICAÇÃO

2010

RESUMO

The purpose of this study is to optimize the manufacturing process of holes made by Company X in one of their products. Besides the optimization, should be maintained the dimensional quality by controlling the diameter, roundness, circularity, and surface finish of cylindrical holes obtained by the widening process, with high-speed steel reamers in a aluminum alloy 7175-T66, to obtain holes with high surface quality and precision of form that meet the design specifications of aviation industry components. It is studied the influence of process variables: cutting speed, feed, about the response variables: feed force and torsion moment. The widening process studied is realized in four operations, consisting of two drilling operations and two widening operations with high-speed steel tools. In the first stage, the tests were carried out with machining parameters of the company to characterize the process. In the second stage, was implemented an increase in machining parameters with a reduction in the production time. In the third stage, the tests were realized to evaluate the influence of pre-drilling and pre-widening on the final quality, resulting in a further reduction of processing time compared with the optimized process. We intend to obtain this hole with the realization of only one drilling stage and one widening stage. For this, it s necessary not only the observation of the quality of the pieces in relation to the requirements demanded by the customers, but also the cycle time of production. The optimized conditions and resulting were: cutting speed of 100 m/min., feed of 0.2 mm/rev, with pre-drilling operation and without pre-widening operation. With this conditions, reduced the production time per piece of 1.42 min. to 0.63 min

ASSUNTO(S)

usinagem manufacturing processes stick machine and extend processos de fabricação aço - indústria - equipamento e acessórios maquina de furar e alargar tool-steel drill bits machining brocas (ferramenta)

ACESSO AO ARTIGO

Documentos Relacionados