Manufacturing Processes
Mostrando 1-12 de 242 artigos, teses e dissertações.
-
1. Spontaneous vegetative propagules differentiation in Bowdichia virgilioides seedlings maintained at MS basal medium
ABSTRACT Bowdichia virgilioides Kunth is a medium size tree used in folk medicine and in furniture manufacturing which makes it a target of extractive processes. The aim of this work was to evaluate the endogenous content of polyamines, amino acids, and sugars in seedlings of Bowdichia virgilioides that presented or not the development of spontaneously diffe
Rev. Ceres. Publicado em: 2021-02
-
2. Characterization of traditional Algerian cheese “Bouhezza” prepared with raw cow, goat and sheep milks
Abstract “Bouhezza” is an Algerian traditional fermented soft-ripened cheese, found and consumed in the Northeast of Algeria. The objective of this study was to explore the preparation process (traditional making diagram) of “Bouhezza” cheese and to study the effect of the type of raw milk (cow, goat and sheep) on the yield and organoleptic character
Food Sci. Technol. Publicado em: 2020-12
-
3. Energy Efficiency in the Food Industry: A Systematic Literature Review
Abstract Governments and private companies have increased efforts to identify effective actions for improving energy efficiency in manufacturing processes. The objective of this work is to improve the decision-making process by increasing the quality of information related to energy indicators in the food industry. This research involves developing a system
Braz. arch. biol. technol.. Publicado em: 25/11/2019
-
4. Aplicação da Metodologia para Qualificação de Procedimentos de Soldagem de Tubulações Industriais Conforme Parâmetros dos Códigos ASME B31.3 e ASME SECTION IX*
Resumo Este trabalho foi desenvolvido visando auxiliar os profissionais de soldagem quanto as incertezas relacionadas às atividades de fabricação, montagem e manutenção de tubulações em plantas industriais no qual se refere à maneira adequada para a condução de atividades de qualificação de procedimentos de soldagem. Discorre sobre a metodologia
Soldag. insp.. Publicado em: 21/10/2019
-
5. Additive manufacturing of titanium alloy could modify the pathogenic microbial profile: an in vitro study
Abstract Additive manufacturing (AM) is an emerging process for biomaterials and medical devices. Direct Laser Metal Sintering (DLMS) is an AM technique used to fabricate Ti–6Al–4V implant materials with enhanced surface-related properties compared with wrought samples; thus, this technique could influence microbial adsorption and colonization. Therefore
Braz. oral res.. Publicado em: 30/09/2019
-
6. Experimental Thermal Analysis in Rotary Friction Welding of Dissimilar Materials
ABSTRACT: Rotary friction welding process (RFW) is one of the most used processes in the world for manufacturing bimetallic components that require high mechanical strength. All process occurs in solid state at temperatures below the melting point of the involved materials, having as the main bonding mechanisms the diffusion and mechanical mixture. The purpo
J. Aerosp. Technol. Manag.. Publicado em: 23/09/2019
-
7. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 16/09/2019
-
8. A Note on Parameter Identification of the AISI 304 Stainless Steel Using Micromechanical-Based Phenomenological Approaches
Austenitic stainless steels have largely been used in industrial equipment, architectural components and consumer items amongst others. Numerical simulation of manufacturing processes of such components and parts requires adequate hardening descriptions and accurate inelastic parameters. This work addresses these issues for the AISI 304 stainless steels base
Mat. Res.. Publicado em: 19/08/2019
-
9. Modular modeling approach for FDM printed structures and piezo disks for metamaterial design
Abstract Research in metamaterials has recently gained interest in the field of noise and vibration control. The ability of creating band gap zones with minimum added mass is the main feature behind its success. In addition, the use of 3D printed parts, particularly the Fused Deposition Modeling (FDM), offers a practical solution for manufacturing parts with
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
10. Thermal behavior (TG-DTA-TMA), sintering and properties of a kaolinitic clay from Buenos Aires Province, Argentina
Resumo As propriedades tecnológicas de um caulim local, considerado um potencial material industrial, foram correlacionadas com o comportamento térmico e processos de sinterização realizados por meio de uma série de análises termoquímicas. A caracterização química e mineralógica do material foi realizada, juntamente com uma simples caracterizaçã
Cerâmica. Publicado em: 06/06/2019
-
11. Influência da composição do gás de proteção nas tensões residuais de juntas de aço DP600 soldadas pelo processo GMAW
RESUMO A indústria automobilística vem investindo em novos processos de fabricação que melhoram a produtividade sem perda da qualidade. Entretanto, a presença de tensões residuais, geradas em todos os processos de fabricação, constitui um dos grandes problemas encontrados na indústria metal mecânica, pois estas podem se somar às tensões de carreg
Matéria (Rio J.). Publicado em: 20/05/2019
-
12. Performance of the INCONEL 625 alloy weld overlay obtained by FCAW process
ABSTRACT Nickel-based weld overlays (cladding) are commonly used in oil & gas industry to extend the life of equipment under corrosive environment, as it improves the corrosion resistance without a significant increase in the manufacturing cost, when compared to a full nickel-based alloy equipment. Although there are extensive literature involving overlays a
Matéria (Rio J.). Publicado em: 20/05/2019