Estudo da inferência de carregamento em histórias de vôos simulados na liga de Al aeronáutico SAE-AMS 7475 T7351 / Loading study of inference in a simulated flights history using an SAE-AMS 7475 T7351 aluminum alloy.

AUTOR(ES)
DATA DE PUBLICAÇÃO

2007

RESUMO

The loading inference and the fractographic reconstruction of fatigue crack propagation rate in simulated flight stories, as Twist, mini-Twist, Falstaff and mini-Falstaff were investigated in this work. The studied material was an aluminum alloy SAE-AMS 7475 T7351. Tensile and hardness tests were carried out in order to determine mechanical properties, as well as chemical and microstructure analysis of the material. C(T) specimens were extracted from a block of material for constant amplitude load testing and M(T) specimens were extracted from a plate and were tested in variable amplitude loading. The curves (da/dN vs. ΔK) for constant-amplitude loading were obtained from fatigue crack propagation tests performed in L-T and T-L directions in C(T) specimens for R (0.1; 0.3; 0.5; 0.7 and 0.8), at room temperature, according to ASTM-E647 (1993). Two different constant loading fatigue tests were performed. At constant ΔP and distinct values of R for obtaining data of stages II and III of da/dN - ΔK curves; and at constant ΔK and increasing the R ratio to be used in the inference of constant amplitude loading in the relation of H/s striation morphology (obtained from fractographic images) and the loading ratio, R. Additionally, fracture toughness tests were executed in T-L and L-T directions, according to ASTM-E1820 (1999). The macroscopic and microscopic fatigue crack propagations were compared and good correlation was obtained for the range 0.1-1.0 μm/cycle, for all R values. By using the K factor parametrization method, Berkovitz (1995), the loading spectrum was estimated for the distinct R-values and the results were compared to the actual spectrum imposed by the test machine. Variable amplitude tests were performed in M(T) specimens by applying simulating flight spectra normalized by NLR, as Twist, mini-Twist, Falstaff and mini-Falstaff, in a servohydraulic test machine MTS, in which a Flextest GT controller was coupled. The suppression of less severe loading flights showed a great influence in fatigue crack propagation life, in simulated flight tests Twist and mini-Twist, but not in Falstaff and mini-Falstaff. The acceleration and slowing down of fatigue crack were observed in the d2a/dflight - a curve obtained from variable loading tests. The fractured surfaces of some samples were examined by the fractographic technique of blocking marks recognition. A good reconstitution of fatigue crack propagation rate of a simulated flight like Falstaff was obtained by the measurements of marks in the fracture surfaces of the more severe flights, in MEV images.

ASSUNTO(S)

falstaff fatigue striation spacing and height ligas de alumínio espaçamento e alturas interestrias de fadiga variable amplitude loading k factor parametrization análise fratográfica mini-twist mini-twist aluminum alloy parametrização fator k crack growth curves (da/dn) mini-falstaff simulated flight falstaff twist curvas da/dn espectro de carga de amplitude variável vôos simulados tipo twist mini-falstaff fractographic analysis

ACESSO AO ARTIGO

Documentos Relacionados