Determination of Barreling of Aluminum Solid Cylinders During Cold Upsetting Using Genetic Algorithm

AUTOR(ES)

Kanca, Erdogan

FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

20/05/2019

RESUMO

ABSTRACT This study presents Genetic Programming models for the formulation of barreling of aluminum solid cylinders during cold upsetting based on experimental results. The maximum and minimum radii of the barreled cylinders having different aspect ratio (d/h= 0.5, 1.0 and 2.0) were measured for various frictional conditions (m=0.1-0.4). The change in radii with respect to height reduction showed different trends before and after folding, therefore, the corresponding reduction ratios of folding were also determined by using incremental upsetting. Genetic programming models were prepared using the experimental results with the input variables of the aspect ratio, the friction coefficient, and the reduction in height. The minimum and maximum barreling radii were formulated as output taking the folding into consideration. The performance of proposed GP models are quite satisfactory (R2 = 0.908-0.998).

Documentos Relacionados

• Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting
• Sintered eutectoid P/M steel behaviour during cold upsetting
• Kick Solid Rocket Motor Multidisciplinary Design Optimization Using Genetic Algorithm
• Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting
• Workability studies on Al+2.5%TiO2+Gr powder metallurgy composites during cold upsetting