Workability studies on Al+2.5%TiO2+Gr powder metallurgy composites during cold upsetting
AUTOR(ES)
Ravichandran, Manickam, Sait, Abdullah Naveen, Anandakrishnan, Veeramani
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
2014-12
RESUMO
Al+2.5%TiO2+Gr composites were synthesized through powder metallurgy technique and their workability behavior has been studied under tri-axial stress state condition. The powders were compacted using suitable punch and die in 400 kN hydraulic press and sintered at a temperature of about 590 ºC for a period of 3 hours in an electric muffle furnace. The sintered preforms were characterized by XRD and SEM analysis. Then the preforms were subjected to incremental compressive loading of 10 kN until the cracks found at the free surface. The true axial stress (σz), true hoop stress (σ}), true hydrostatic stress (σσm) true effective stress (σeff), formability stress index (β) and stress ratio parameters [(σz/σeff), (σm/σeff), (σ}/σeff)] were calculated for all the preforms and these are correlated with the true axial strain (e z). It is inferred that, the addition of TiO2 and Gr to the Al matrix material increases the stress ratio parameters and formability stress index (β). A hardness test was also conducted for sintered and cold forged preforms and results are reported.
Documentos Relacionados
- Workability studies on cold upsetting of sintered copper alloy preforms
- Some aspects of barreling in sintered plain carbon steel powder metallurgy preforms during cold upsetting
- Strain hardening behaviour in forming of sintered iron-0.35% carbon powder metallurgy preform during cold upsetting
- Influência da aspersão térmica por plasma e suas altas taxas de resfriamento na cristalinidade de fases do sistema Al2O3-TiO2-Al2TiO5
- Influência da adição de nanopartículas de TiO2 na obtenção de compósitos a base de liga AA2014 fabricada via metalurgia do pó