Composite coatings of titanium-aluminum nitride for steel against corrosion induced by solid NaCl deposit and water vapor at 600 °C
AUTOR(ES)
Li, M.S., Wang, F.H., Shu, Y.H., Wu, W.T.
FONTE
Materials Research
DATA DE PUBLICAÇÃO
2004-03
RESUMO
Composite coatings (Ti,Al)N with different Al content were deposited on a wrought martensite steel 1Cr11Ni2W2MoV by reactive multi-arc ion plating. With the addition of Al to the coatings, the crystallographic structure of them changed from B1 NaCl to B4 ZnS, the relevant hardness and adhesive strength firstly increased then decreased and their oxidation-resistance was also dramatically improved. It was indicated that the introduction of Al was beneficial to (Ti,Al)N coatings against corrosion induced by NaCl(s) in wet oxygen at 600 °C as well as wet corrosion in NaCl solution at ambient temperature.
Documentos Relacionados
- Corrosion Protection of Steel by Volatile Corrosion Inhibitors: Vapor Analysis by Gas-Diffusion Microextraction and Mass Loss and Electrochemical Impedance in NaCl Deliquescence Tests
- Correlation between Corrosion Potential and Pitting Potential for AISI 304L Austenitic Stainless Steel in 3.5% NaCl Aqueous Solution
- The Inhibition of Sodium Oleate for Pitting Corrosion of Aluminum Alloy 2024 in 0.1 mol L-1 NaCl Solution
- WC-CoCr coatings sprayed by high velocity oxygen-fuel (HVOF) flame on AA7050 aluminum alloy: electrochemical behavior in 3.5% NaCl solution
- Constant load creep data in air and vacuum on 2.25Cr-1Mo steel from 600 °C to 700 °C